CWE/P- 86/2020-21 SPECIAL REPAIR TO BLDG NO P-121/01 TO 08 OF CERTAIN UNIT AT MADHOPUR MIL STATION UNDER GE BASOLI

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster or cement lime plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm but not exceeding 4Sqm each including taking out hold fast complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including taking out hold fast complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on ceiling in cement mortar 1:3 on fair faces of brick work or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12mm graded crushed stone aggregate) as in floor complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 - 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including hole for gas pipe, rounding, chamfering, edging etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for machine cut kota slab fooring 18-20 mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of brick tile or terracing tiles, single layer on roof complete all as specified.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/sqm including 20 mm thick screeding in cement mortar 1:4 mixed with water proofing compound & finishing the surface even and smooth without using extra cement complete all as specified and directed (WPC shall be measured and piad separetely)

Supply only liquid water proofing compound. complete all as specified and directed.

M&L for applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.25 Kg/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) laid on primed surface by forced application with overlap of 10 cms (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen of grade 85/25 @ 0.7 Kg/Sqm over the APP complete all as specified and directed.

M&L for plain cement concrete padding 1:2:4 type B-0 of uniform thickness 50mm in two layers, top surface of plain cement concrete padding shall be furnished even and smooth w/o using extra cement, complete all as specified and directed. (wire netting shall be measured and paid separately)

M&L for PCC 1:2:4 type B-2 (using 20 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finishing the even & fair and providing joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight complete all as specified and directed.

S&F Coloured chequered cement concrete tiles 200x200x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 15mm thick screed bed in cement mortar 1:4,complete all as specified and directed.

S&F of tubular towel rail, ISI marked 600mm long between flanges , 20mm dia 'D' type Brass Chromium plated incl necessary brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

M&L for 50 mm thick cement concrete (1:3:6), type C-1 using (20mm graded stone aggregate) as in floors, hard standing etc and laid in alternate bays complete and finished even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

M&L for "Steel window factory made double shutter and tubular moulded frame of 16gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer." complete all as specified and directed.

S&F of framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for 1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L for 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1(using 20mm graded crushed stone aggregate) for filling in pressed steel door frame/hold fast complete all as specified and directed.

S&F of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, as per specification & drawing complete all as specified and directed.

S&F of factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) complete all as specified and directed.

S&F of factory made fully glazed single piece both side PVC prelaminated door shutter 35 mm thick, consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelaminated sheet for top rail, lock rail and bottom rail. Panelling sheet to be lifted in the mild steel framed welded/sealed to stiles and rails fixed with PVC sheet beading and jointed together with solvent cement all as per drg No. CWE/TD-150/12 sheet 1/1 all as specified and directed.

M&L for prelaminated PVC board 20 to 22 mm thickness prelaminated one side and other side balancing white lamination as in cup board shutters, frame and shelve complete all as specified and directed.

M&L for plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and directed.

M&L for factory made Glazed and skelton shutters 30mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated complete all as specified and directed.

M&L for galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

M&L for 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F of aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed.

S&F of 250mm long aluminium alloy, anodised, extruded section sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed.

S&F of steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia, 100mm size complete all as specified and directed.

S&F of butt hinges, mild steel cold rolled and fixed 100 mm, complete all as specified and directed.

S&F of butt hinges, mild steel cold rolled and fixed 75 mm, complete all as specified and directed.

S&F of extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed.

S&F of hasp and staple of size 100 mm, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for second class hard wood small fittings such as brakets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary, articles not exceeding 200cu.cm each complete all as specified and directed.

S&F of 300mm ordinary rat tail mild steel rod pattern springs including roller and roller plate complete all as specified and directed.

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops rollers etc complete all as specified and directed.

M&L for two coat of synthetic enamel paint over and including a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

M&L for two coat of synthetic enamel paint over and including a coat of pink primer on old wooden surface of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete, all as specified.

M&L for preparation new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE complete all as specified and directed.

M&L for preparation old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE complete all as specified and directed.

M&L for preparation old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of Black Japan paint of colour as approved by GE complete all as specified and directed.

M&L for two coats of distemper Oil emulsion over and including a coat of primer on walls including preparation surfaces on New Surface complete all as specified and directed.

M&L for two coats of distemper Oil emulsion over a coat of primer on walls including complete removal of existing treatment all as specified and directed.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparing old white washed surfaces of ceiling (plastered or unplstered) for white washing and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats cement base paint of approved brand complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coats cement base paint of approved brand complete all as specified and directed.

S&F in repair water closet (Squat pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F in repair water closet (Squat pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and as directed .

S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets 32mm dia PVC flush pipe complete all as specified and directed.

Supply only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal complete all as specified and directed.

M&L for steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

M&L for steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm , complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 20mm , complete all as specified and directed.

S&F in repair stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

S&F in repair stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore, complete all as specified and directed.

S&F in repair stop valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, complete all as specified and directed.

S&F in reapir 15 mnm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F of PVC connection 15mm size with PTMT nuts on both ends of length 450mm , screwed for iron pipe of 15mm bore complete all as specified.

S&F of ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe. (Minimum weight 210 gms) or brass ferrule of size 20 mm bore complete all as specified and directed.

S&F of Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

S&F of 100 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as specified and directed.

All as per srl item No 80 here-in-before but except pipe, any type

S&F of 75 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as specified and directed.

All as per srl item No 82 here-in-before but except pipe, any type

S&F of 50 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as specified and directed.

All as per srl item No 84 here-in-before but except pipe, any type

S&F in repairs, 100 mm dia cast iron soil waste and vent spun pipe ISI marked in any length with or without ears with lead joints laid in floor/wall, complete all as specified and directed.

S&F in repairs, 75 mm dia cast iron soil waste and vent spun pipe ISI marked in any length with or without ears with lead joints laid in floor/wall, complete all as specified and directed.

S&F in repairs, Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 100mm,complete all as specified and directed.

S&F in repairs, Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 75mm, complete all as specified and directed.

S&F in repairs, Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, bore of pipe 100mm, complete all as specified and directed.

M&L for extra over cast iron pipe fittings, if fitted with oval access door for bore of pipe 100mm cast iron, complete all as specified and directed.

M&L for extra over cast iron pipe fittings , if fitted with oval access door for bore of pipe 75mm cast iron, complete all as specified and directed.

S&F in repairs, 100 mm dia cast iron 'P' or 'S' trap complete all as specified and directed.

S&F of cast iron floor trap ISI marked of 75mm dia of outlet, with grating including jointing to waste pipe with fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F of 50 mm dia cast iron cowl (ISI marked) complete all as specified and directed.

S&F of salt glazed stone ware gully traps, square or round mouthed, type 'P' of size 150 x 150 mm complete all as specified and directed.

S&F in repair stainless steel sink 1mm thick for kitchen with plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed, complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia, PTMT grating 125mm dia with waste hole including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (minimum weight 25gms), suitable for floor traps, complete all as specified and directed.

Taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal (measured overall as fixed along the centre line over fitting and accessories)

M&L for PVC (SWR) pipes 110 mm dia any length single socketed with rubber ring joint, laid in floor or trenches as soil pipe(vent pipe), complete all as specified and directed.

S&F for 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.

Dismantling water tanks and removing of capacity exceeding 500 but not exceeding 1000 ltr complete all as specified and directed.

M&L for rotational moulded polythene water storage tank, coloured, tripple layer cylindrical vertical with threaded closed top cover 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug, incl taking down unserviceable old tank any type complete all as specified and directed.

S&F in repair stack clamp out of 50 mm by 5 mm lat iron and 16 mm dia round iron stays, including boltsand nuts and securing ends of stays to wall or roof for 100mm bore pipe complete all as specified and directed.

S&F stainless steel plate rack750 x 750 x 225 mm deep 1mm thick with plate rack, spoon holders , shelves etc , complete all as specified and directed.

S&F in repair stop valve, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm, complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring for light/fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkun boxes having thickness as specified 3mm bakalite laminated sheet ISI marked for switches and sockets, including 1.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per srl item No 110 here in before but for one 3 pin socket outlet 5 amp on independent board complete all as specified and directed.

All as per Srl item No 110 here in before but for one 3 pin socket outlet 5 amp on same board complete all as specified and directed.

All as per srl item No 110 here in before but for one Bell/buzzers point controlled by one push button on the same board with other inner switcvhes or independent with cable 1.5 Sqmm size complete all as specified and directed.

All as per srl item No 110 here in before but for one one light point controlled by two 2 way switch all as specified and directed

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet ISI marked for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

S&F of Switch piano flush type 5 Amp, 230 Volts single pole one way, (ISI marked), complete all as specified and directed.

S&F of Socket outlet 3 pin 5/6 Amp, 230 Volts flush type complete all as specified and directed.

S&F of Switch piano flush type 15 Amp, 230 Volts single pole one way, (ISI marked), complete all as specified and directed.

S&F of Socket outlet 2 in 1, 6 pin, 15/16 Amp flush type universal,complete all as specifed.

S&F of switch bell push 5/6 Amp, flush type complete all as specified and directed.

S&F of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F of Lamp holder PVC/Polycarbonate type with back plate having matching colour to holder for angle/batten fittings complete all as specified and directed.

S&F of bell multi music type 230 Volts, (ISI marked) complete all as specified and directed.

S&F of switch piano flush type 5 Amp, single pole, two way complete all as specified and directed.

S&F of ceiling rose, 3 phase/bakelite 65x50mm two or three therminals isolated body fixed on PVC round block complete all as specified.

S&F in replacment LED Tube light fitting 20 watt , 230 volts, Industrial box type made of CRCA sheet complete with bipin holders,connector block and retro LED rod of 20 Watt, 4 feet long with aluminium housing provided for efficient heat dissipation with polycarbonate diffuser having high efficacy (double side connection) complete with all accessories internally prewired batten (double side connection) and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings ,complete all as specified and directed. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost. (iv) Contractor shall arrange arrange 70% material at site for approval of GE before incorporation in the work.

S&F in replacement LED bulkhead fitting luminaries with opla diffuser including (LED lamp type 10 watt LED 6000 K), lamp holder etc connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required complete all as specified and directed.

S&F in replacement LED ceiling light fittings flush Mount ceiling light fixtures including (BL 10 W Round LED down light), lamp holder etc connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

M&L Sheet metal enclosure factory made (Double door) for DBs, vertical Tripple pole and neutral, 415 volts, 50 Hz, 4 way, IP-54 with 200Amps rated copper bus bar, neutral link, earth bar and din rail fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

S&F inreplacment sheet metal enclosure powder coated factory made (Double door) for DBs, single pole and neutral, 240 volts, 50 Hz, 08 way, IP-43 with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning,complete all as specified and directed.

S&F of MCB SPN 32 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

S & F in repairs MCB SP 6 to 32 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

Supply and laying in repairs of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of adequate size and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size wiil be measured as a one unit.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

S&F of ceiling fan AC single phase 230/240 volts of size 1200 mm sweep complete type BLDC star rated including blade ,down rod etc including connecting to ceiling rose all as required or directed. Note: Test report and Warranty certificate from OEM for minimum 2 years to be submitted before claiming for payment.

S&F of exhaust fan AC sinlge phase 230/240 volts of size 300 mm sweep steel body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed including dismentling old unsv and depositing to MES storeyard.

Supply laying jointing and testing LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core complete all as specified. Note : Earth work , sand cushioning, GI pipe , brick covering for mechanical protection will be measured and paid separately under respective item of Schedule.

S&F DWC high density polyethelene pipes in replacement having 63/50outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site including taking down the old unserviceable complete all as specified and directed.

M&L for excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation laying poles, stay assembly and laying of LT/HT cables in any type of soil and getting out, complete all as specified and directed.

M&L for returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

M&L for removal of excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed

Replacement of unserviceable MCCB 100 Amps, 4 Pole, 415 Volts, 50 Hz, 16 KA complete all as specified and directed.

Supply and laying in repairs of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 4 sqmm drawing into and including concealed PVC rigid non metallic conduit of adequate size and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 4 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 4 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 4 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size wiil be measured as a one unit.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

BALKRISHAN GUPTA AND SONS

M/S DUGGAL CONSTRUCTION CO

Ms Narinder Kumar Sehgal