SPECIAL REPAIRS TO OMQs AT AFS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm complete all as specified and directed.

M&L Vitrified ceramic light shade tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring over and including 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L Vitrified ceramic light shade tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm as in skirting over and including 10 mm thick rendering in CM 1:4 as in dado/skirting including taking down old plaster surfaces finished all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L Glazed coloured Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over and including 10 mm thick rendering in CM 1:4 finished all as specified and directed in toilets ang kitchen.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm as in flooring over and including 15mm thick screed bed in CM 1:6 all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for Granite(of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 20mm thick screed bed in CM 1:6 all as specified and directed.

Rounding to edges of granite slab such as cooking platform all as specified and directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) all as specified and directed.

M&L 75 mm thick cement concrete 1:2:4 type B-2,using 40 mm graded stone aggregate for plinth protection all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ thickness of slab 100mm below all as specified and directed.

Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

Demolition of brick work or stone masonry built in CM incl all quions all as specified and directed.

Demolition of cement concrete in ground floor and pavings in any description and in any position all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces, rendering is to be finished even & smooth without using extra cement on internal walls all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces, rendering is to be finished even & smooth without using extra cement on external wall all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bound distemper over a coat of interior wall care putty 3mm thick all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD over a coat of 3mm thick wall care putty all as specified and directed

M&L preparation of old wall surface and applying two coat of White wash all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD in ceiling all as specified and directed

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic enamel all as specified and directed.

M&L Preparing old painted Rolling shuttters surface and applying one coat of Aluminium Painting to steel surface all as specified and directed.

M&L for preparation of the old surfaces unplastered of wall complete removal of existing treatment applying two coat of cement base paint ,complete all as specified and as directed.

M&L for one coat of exterior paint to old decorated surfaces of wall including preparation of surfaces complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Taking up or down 25mm steel tubing and connections all as specified and directed.

S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed.

S&F in repair gun metal globe gate valve 20 mm bore all as specified and as directed.

S&F in repair gun metal globe gate valve 25 mm bore all as specified and as directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed .

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F plastic pedestal pattern seat cover black with flat bottom and cover and MS chormium plated hanging type device all as specified and directed.

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets all as specified and as directed .

S & F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed completed all as specified. Make : Cera/Parryware/Neycer

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified.

S&F in repair 15mm dia, stop valve concealed type chromium plate fancy type with long shank and cup complete all as specified.Make : Cera/Jaguar/Ess Ess.

S&F in repair Brass CP Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.

S&F 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. Cera Model F3002152 or eqivalent makes as specified.

S&F 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. Make : Nirali/ diamond/Blue star

S&F sink cock fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302) or eqivalent makes as specified.

S&F Towel Rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H) or eqivalent makes as specified.

S & F PVC Cabinet mirror of size 500X400mm all as specified (make Prayag or equivalent).

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.Make : Cera/Jaguar/Ess Ess.

S & F in repaiers CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.Make : Cera/Jaguar/Ess Ess.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

Supply and Fixing of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&Fin repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.Make : Cera/Jaguar/Ess Ess

S & F corner glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.Make : Cera/Jaguar/Ess Ess

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.(Min wt 105 gm).

S & F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.Make : Cera/Jaguar/Ess Ess

Supply and Fixing Stainless steel Toilet paper holder, mkae Jaguar Model AKP 35753P or equivalent all as specified and directed.

S&F stainless steel Soap dish fix to wall all as directed and specified.

S&F Corner glass shelf large, 300x300mm of cera all as specified and directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera all as specified.

S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.

S&F Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed as specified and as directed

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr as specified and as directed ( Make :NIRALI,Blue star,Nilkhant)

S&F PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) as specified and as directed

S&F PVC(SWR) Pipe s 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors as specified and as directed

S & F PVC (SWR) bends 110 mm dia in any radius with access door etc as specified and as directed

PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors and walls as specified and as directed

S & F PVC (SWR) bends 75 mm dia in any radius with access door etc as specified and as directed

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc as specified and as directed

S&F CP grating size 100mm fixed with white cement all as specified as specified and as directed

S&F in repair rotational moulded polyethylene water storage tank 1000 ltr capacity, triple layered, hoisted and fixed in position all as specified in SSR Pt - I including dismantling old tank as specified and as directed

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair as specified and as directed

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank as specified and as directed(Minimum weight 25mm- 65gms) .

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank as specified and as directed(Minimum weight 20mm- 45gms ).

Taking down door chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame) of any description as specified and as directed

Taking down door chowkats or frames exceeding 1.5 sqm each but not exceeding 4 sqm each with shutters (without taking off shutters from the frame) of any description as specified and as directed

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description not exc 2sqm each and refixing in the same opening all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified.

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON,) or eqivalent makes as specified.

S& F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON or eqivalent makes as specified.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section all as specified and directed.

S&F for aluminium handle 150mm cast type anodised.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate all as specified and directed.

S&F Brass 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.

S&F in repair Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as specified and directed.

S&F Continuous(piano) hinges,brass ,bright finish of electrogalvanised 40 mm width of flap all as specified and directed.

Cover fillets of standard 6 mm thick ness hard board, 40mm wide,and fixing with screws.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as specified and directed.

S&F figured glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as specified and directed.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.

M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of primer to steel surface all as specified and directed.

S& F for aluminium powder coated drapery rod 32mm dia including suitable fancy type suitablre brackets on both ends fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends all as specified and directed.

S& F aluminium powder coated fancy type suitabe brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends all as specified and directed.

M&L for 20 mm thick Plastic kitchen cabinet with all accessories (Handle,Piano hinges,Magnet catcher telescopic channel etc Including 6mm thick plastic sheet back side of the kitchen cabinet of Make :Sintex or Equivalent) all as specified and directed.

S&F SS Bucket 48 cm x 50 cm x 10 cm all as specified and directed.

S&F SS Bucket 48 cm x 50 cm x 15 cm all as specified and directed.

S&F SS Bucket 48 cm x 50 cm x 20cm all as specified and directed.

M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified & directed.

Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement all as specified and directed. Note:- supply only of water proofing compound will be measured and paid seperately.

Supply only approved integral water proofing compound, Make : conplast x 421 IC of M/s Foroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane.

Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick screed bed in cement mortar 1:4 complete on staicase complete all as specified and as directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over over and including 10mm thick cement mortar 1:4 complete all as specified and as directed.

Taking down the unserviceable point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling roses, pendent regulators, sockets etc any light points and making good distrubed surfaces of walls and floors etc.

Taking down unserviceble DBs, with MCBs and Main switches.

Taking down ceiling fan, dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring, servicing complete and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

Taking down Exhaust fan, dismantling blades and removing fan and refixing Exhaust fan after completion of re-wiring, servicing complete and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

M & L Painting of Taking down ceiling and Exhaust fans complete, in site with synthetic enamel paint by spraying including filling caviteis with filler, one coat after cleaning all dust including painting MES No etc all as directed.

M&L for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concealed conduit in existing brick/stone wall for concealing conduit and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor,1.5 sqmm for earth continuity conductor and connected to common earth dolly for One light point controlled by one 5 Amps switch

All as per item No 128 above but one ceiling fan/Exhaust fan controlled by one 5 Amps switch

All as per item No 128 above but one socket 5 amp on independent board.

All as per item No 128 above but one socket 5 amp on Same Board with other switches.

All as per item No 128 above but one Bell Point controlled by one Bell Push

All as per item No 128 above but one light point controlled by two 2 way switch of 5 Amps.

All as per item No 128 above but wiring with 2.5 sq mm FRLS copper cable including earth continuty conductor with 2.5 sq mm FRLS copper cable for one 6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch.Note for item No. 128 to 134 :- (a) The flush metal box and cover plate with frame for fixing modular switch/socket/regulator etc shall be measured and paid sepertately under relevant items of the schedule. (b) Cutting chases for routing conduit and making good as per the existing where ever necessary shall be measured and paid seperately.

M&L for point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed copper conductor FRLS grade cable ISI marked in and including PVC casing - caping of suitable size medium grade ISI marked complete including 1.6 mm thick CI/pressed steel terminal switch boxes flush mounting type with plastic laminated sheet cover of 3.0 mm thick for fixing switch / socket/ regulator etc, including earth continuity wire of PVC insulated unsheathed 1.5 Sqmm (nominal cross sectional area) FRLS copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for one light point controlled by one 5 Amps switch

All as per item No 135 above but one ceiling fan controlled by one 5 Amps switch

All as per item No 135 above but one socket 5 Amp on independent board.

All as per item No 135 above but one socket 5 Amp on same board

M&L for point wiring complete with 2 run of 4.00 sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including rigid PVC conduit not less than 20mm dia and conduit accessories fixed to walls / roofs / floors / ceiling etc., and including provision of PVC insulated heavy duty ISI Marked unsheathed copper conductor FRLS 4 sqmm for earth continuity conductor and connected to common earth dolly for 20 Amps Metal clad socket all as specified and directed.

Supply and fix switch piano 5 Amps flush type one way all as specified and directed.

Supply and fix switch socket outlet 5 pin 5 Amps multi pin flush type all as specified and directed.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed.

Supply and fix Modular switch 2 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed.

Supply and fix Modular Bell push 6A 1 module type, 230 volts, ISI marked complete.

S & F Modular type stepped type electronic fan regulator 2 Module 230 Volts all as specified and directed.

Supply and fix modular type Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix modular type Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Bell ding dong AC 230 V complete.

Supply and fix modular white cover plate with frame, 1 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 2 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 3 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 4 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 6 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 8 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 1/2 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 3 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 4 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 6/8 module ISI marked complete all as specified and as directed.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and directed.

Supply and fixing LED , Tube light fitting 20 Watts with decorative box type suitable for 1x20 W LED tube surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired, including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting and two PVC Round block for mounting tubelight fitting including dismantling old unsv fittings all as specified and directed. Make : Crompton/Ledvance/Bajaj/Philips/Wipro/Havells.

Supply and fixing LED , Tube light fitting 8 Watts with decorative box type suitable for 1x8W LED tube surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting, and two PVC Round block for mounting tubelight fitting including dismantling old unsv fittings all as specified and directed. Make : Crompton/Ledvance/Bajaj/Philips/Wipro/Havells.

Supply and fixing PEARL Round/Square LED 18 watts 230 volts surface mounted slim LED panel with powder coated finshed in white housing, with Control driver with efficiency 90 %,including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Crompton/Ledvance/Bajaj/Philips/Wipro/Havells.

Supply and fixing LED 14 Watts 230 V, with Control driver with efficiency 90 % ,attractive type sleek LED mirror light 2 feet fitting with high output diffuser prewired inluding all accessories, connecting up with twin core twisted copper conductor with suitable size and two PVC Round block for mounting tubelight fitting, completed all as specified and directed. Make : Crompton/Ledvance/Bajaj/Philips/Wipro/Havells.

Supply and fix 10 watts 230 V integrated LED Bulk head luminaire fitting of pressure die cast housing with Control driver with efficiency 90 %, Acrylic diffuser & frame with IP 65 protection, including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Crompton/Ledvance/Bajaj/Philips/Wipro/Havells.

Supply and fix 45 watts, 230 V LED fitting for Building security with pressure die cast aluminum housing, with Control driver with efficiency 90 %,with heat resistant glass and IP 65 protection with better optics for uniform distribution,including necessary fixing arrengment of clamps,nut,bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Crompton/Ledvance/Bajaj/Philips/Wipro/Havells.

M/L sub-main wiring with two runs of 10 sqmm unsheathed PVC insulated, single core cable with copper stranded conductor in and including suitable PVC Conduit with 10 sqmm copper earth wire after taking out the existing sub-main wiring , etc. Note: 2 runs of cable and one run earth wire and PVC conduit will be measured as one length all as specified and directed.

Sub main wiring complete with two runs of 2.5 Sqmm single core PVC insulated heavy duty ISI Marked unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid PVC white conduit and condit accessories concealed /fixed to walls/roofs/floors etc.., and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 2.5 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed. Note:- Two run of cable and one run of earth wire and PVC conduit shall be measured as one lenth.

Supply and fix Sheet metal enclosure double door MCB DB SPN 16 way with 200 A rated bus bar & neutral link complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way Double door complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix single pole and netural encloser with a two pin and earth plug socket complete with one single pole MCB of 20 Amps, C curve, 10KA rupturing capacity all as specified and directed.

Taking down and Supply and Fix MCB SPN 6 to 32A, B curve, 10KA rupturing capacity all as specified and directed.

Taking down and Supply and Fix MCB SP 6 to 32A 10 KA rupturing capacity.

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level connected to 4 mm dia GI earth wire as earth lead by means of bolts,nuts,washers of Gl all as shown in electrical plate No 3 of SI part I connected to earth test point including earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1 cover 40mm thick including 6 mm dia reinforcement and funnel watering pipe etc all as specified and directed.

Supply and fix Exhaust fan made of plastic (250mm Sweep) with louvers and acessories all as specified and directed. Make: Standard/Havells/USHA/Crompton/Bajaj

M & L for provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed.

Supply and fix Meter board made out enclosures are of 2.0 mm CRCA sheet powder coating for load bearing member & non load bearing member with aluminium busbar with colour coded heat shrinkable PVC sleeve and suport with current density 1/Sqmm, including all internal wiring will be done with PVC insulated copper of suitable size, space for single phase energy meter 5 Nos, including MCBs four pole 63 Amp, B curve, 10KA rupturing capacity - 01 No as incomer and MCBs SPN 32 Amp, B curve, 10KA rupturing capacity-05 Nos as a outgoings including taking old unserviceable meter board with connected items complete all as specified and directed.Make -M/s Jeevan Switchgears or equivalent.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as directed

Lakkaiah Rangaswamy

chowdeshwariconstructionco

Thirumala Construction

Gnani Builders

Sri Maruthi Builders

M/s Sri Chakrapani Constructions