Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 CrAdmitted-Finance 233 PLATINUM PLAZA OPP IOCL PUMP NR JUDGES BUNGLOW CROSS ROAD BODAKDEV AHMEDABAD GUJARAT 380054 | AHMADABAD | GUJARAT | 380054 | ₹6.6 Cr | L1 | Admitted-Finance |
| 2 | L2₹7.0 Cr+₹40.0 L (6.03%)Admitted-Finance | ₹7.0 Cr+₹40.0 L (6.03%) | L2 | Admitted-Finance |
| 3 | L3₹7.2 Cr+₹55.9 L (8.42%)Admitted-Finance | ₹7.2 Cr+₹55.9 L (8.42%) | L3 | Admitted-Finance |
| 4 | L4₹7.5 Cr+₹89.8 L (13.5%)Admitted-Finance BASEMENT NO 16 DHARMA TOWERS 88 150 NELSON MANICKAM ROAD CHOOLAIMEDU CHENNAI 600094 | CHENNAI | TAMIL NADU | 600094 | ₹7.5 Cr+₹89.8 L (13.5%) | L4 | Admitted-Finance |
| 5 | L5₹7.8 Cr+₹1.2 Cr (17.4%)Admitted-Finance 245 2 RAJPUR ROAD OPPOSITE HOTEL MADHUBAN DEHRADUN | ₹7.8 Cr+₹1.2 Cr (17.4%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | EVERCREST PROJECTS PVT LTD. L1 | Modern Electric Company L5 | Sabari and Leon Electricals Pvt Ltd L4 | Arken Solutions Pvt. Ltd L6 | Konstelec Engineers Limited L3 | Kulaswaminee Engineerrs L2 | shanti enterprises electricals pvt ltd L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Design, engineering, Manufacturing/procurement, fabrication, assembling, wiring, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning of Indoor Type IP 44 Enclosure, 11 KV, 800 Amps, HT VCB panel with SC Breaking current of 26.3 kA(rms) for 3 seconds. After installation of panel , the same should be added & connected with the existing ABB Make 11KV switchgear panel by copper bus bar ( Type VD4 12.12.25, ) of existing substation (Main Receiving Station) . Power and Control Bus bars used in the Panel shall be Copper Bus Bar and bus bar sizing should be as per MELSON and BOTH Equation published in Copper Development association review Panel has to be configured in the existing SCADA. Panel shall be type tested and all the switch gear should be arc flash resistant. Bidder shall furnish valid type Test certificates already carried out on similar VCB from a reputed institute (other than bidder). All the Spares as per quantity mentioned in the Technical Specification should be supplied which includes earth truck( 1 No ), Vacuum interrupter bottle ( 6 Nos ), Trip Coil ( 4 Nos ), Closing Coil ( 4 Nos ), Auxilliary switch ( 4 nos ), Spring limit switch ( 4 Nos ), Spring Charging Motor ( 2 Nos ) , Breaker position limit switch ( 8 Nos ), VCB Draw out trolley ( 1 Nos ) Make :- ABB/L&T/Schneider Electric/Siemens/CG. Panel shall be procured from OEM or its authorized channel partner. | ||||||||||
| 1.10 | Supply | 4 | Set | 39,84,132 ₹39,84,132 | 30,60,000 ₹30,60,000 Lowest | 40,00,000 ₹40,00,000 | 49,27,208 ₹49,27,208 | 56,99,400 ₹56,99,400 | 40,37,864 ₹40,37,864 | 45,97,028 ₹45,97,028 |
| 1.20 | Installation | 4 | Set | 70,800 ₹70,800 | 96,000 ₹96,000 | 1,00,000 ₹1,00,000 | 47,200 ₹47,200 Lowest | 70,940 ₹70,940 | 61,360 ₹61,360 | 78,360 ₹78,360 |
| 2.00Design, engineering, Manufacturing/procurement, fabrication, assembling, wiring, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning of Standalone Indoor Type IP 44 Enclosure, 11 KV, 800 Amps, HT VCB panel with SC Breaking current of 26.3 kA(rms) for 3 seconds, as per Tender Specification and approved drawings. Power and Control Bus bars used in the Panel shall be Copper Bus Bar and bus bar sizing should be as per MELSON and BOTH Equation published in Copper Development association review Panel has to be configured in the existing SCADA. Panel shall be type tested and all the switch gear should be arc flash resistant. Bidder shall furnish valid type Test certificates already carried out on similar VCB from a reputed institute (other than bidder). All the Spares as per quantity mentioned in the Technical Specification should be supplied which includes earth truck( 1 No ), Vacuum interrupter bottle ( 12 Nos ), Trip Coil ( 8 Nos ), Closing Coil ( 8 Nos ), Auxilliary switch ( 8 nos ), Spring limit switch ( 4 Nos ), Spring Charging Motor ( 4 Nos ) , Breaker position limit switch ( 8 Nos ), VCB Draw out trolley ( 2 Nos ). Make :- ABB/L&T/Schneider Electric/Siemens/CG. Panel shall be procured from OEM or its authorized channel partner. | ||||||||||
| 2.10 | Supply | 2 | Set | 19,92,066 ₹19,92,066 | 19,30,000 ₹19,30,000 Lowest | 20,00,000 ₹20,00,000 | 44,40,458 ₹44,40,458 | 28,49,700 ₹28,49,700 | 19,66,598 ₹19,66,598 | 22,26,686 ₹22,26,686 |
| 2.20 | Installation | 2 | Set | 35,400 ₹35,400 | 48,000 ₹48,000 | 50,000 ₹50,000 | 23,600 ₹23,600 Lowest | 35,470 ₹35,470 | 30,680 ₹30,680 | 39,180 ₹39,180 |
| 3.00Design, engineering, Manufacturing/procurement, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning and submission of technical documents of 2.5 MVA, 11KV/0.433 V, Dyn11, ONAN, Oil Immersed Step down Transformer, Off circuit tap changer with a tapping range of +5% to -5% in steps of 2.5% on HT side and other accessories as listed in the Tender specifications. The transformer shall be suitable for bus duct termination on LV side and shall be provided with cable termination chamber on HV side. The transformer shall be as per IS 2026. Conservator Tank should be Provided with air cell or diaphragm. Transformers should be Provided with Oil soak pit and design of the same is in scope of Bidder. Transformer should have fault capacity of 65 kA for 1 sec in the LV side. OT/WTI communication should be provided with RS 485 port. Make:- CG/SIEMENS/KIRLOSKAR/VOLTAMP/ANDREWYULE/ALSTHOM. Transformer shall be procured from OEM or its authorized channel partner. | ||||||||||
| 3.10 | Supply | 2 | Set | 1,03,25,850 ₹1,03,25,850 Lowest | 1,10,58,900 ₹1,10,58,900 | 1,13,28,000 ₹1,13,28,000 | 1,14,79,512 ₹1,14,79,512 | 1,48,68,000 ₹1,48,68,000 | 1,38,85,692 ₹1,38,85,692 | 1,41,62,294 ₹1,41,62,294 |
| 3.20 | Installation | 2 | Set | 70,800 ₹70,800 Lowest | 2,00,000 ₹2,00,000 | 2,00,000 ₹2,00,000 | 1,77,000 ₹1,77,000 | 1,77,354 ₹1,77,354 | 15,64,680 ₹15,64,680 | 4,30,972 ₹4,30,972 |
| 4.00Design, engineering, Manufacturing/procurement, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning of 4000 Amps, 415 V, Sandwich Type Bus Duct containing 3 Phase and neutral , copper bus bar for Extending power supply from Transformer LV side to the PCC as per Tender Specification and approved drawings ( Bus duct length should be as per site conditions and location of PCC Panel which will be approx 15 meters for each transformer). Bus Duct system shall be compact, low impedance type, totally enclosed and non-ventilated for protection against mechanical damage and dust accumulation. The busduct system shall be manufactured and type-tested to IEC60529 (Classification of Degree of Protection) to meet the requirement of indoor and outdoor installation. Ingress Protection should be IP55 or better. Phase sequence of Bus Bars in Bus duct shall match with the phase sequence of Transfomer and PCC Panel. Make :- L&T/ Schneider Electric/ Siemens/C&S. | ||||||||||
Tender Value
₹8.0 Cr
EMD Value
₹15.9 L
Closing Date
27 Aug 2024, 2:00 pmClosed
General manager, ZC(P)
Office of General Manager, Zirconium Complex, Pazhayakayal, Tamilnadu-628152.
SITC of Transformers , 11 KV HT cables and associated works for extending power supply to Augmentation loads of OPF at ZC (P)
2024_NFC_817206_1
NFC/ZC/2023/ ElectricalPackage-1/ OPF AGU /1
Open Tender
Electrical Works
Works
240 days
Zirconium Complex, Pazhayakayal
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹15.9 L
22 Feb 2025
22 Jul 2024
31 Aug 2024
22 Jul 2024
27 Aug 2024
5 Aug 2024
Design, engineering, Manufacturing/procurement, fabrication, assembling, wiring, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning of Indoor Type IP 44 Enclosure, 11 KV, 800 Amps, HT VCB panel with SC Breaking current of 26.3 kA(rms) for 3 seconds. After installation of panel , the same should be added & connected with the existing ABB Make 11KV switchgear panel by copper bus bar ( Type VD4 12.12.25, ) of existing substation (Main Receiving Station) . Power and Control Bus bars used in the Panel shall be Copper Bus Bar and bus bar sizing should be as per MELSON and BOTH Equation published in Copper Development association review Panel has to be configured in the existing SCADA. Panel shall be type tested and all the switch gear should be arc flash resistant. Bidder shall furnish valid type Test certificates already carried out on similar VCB from a reputed institute (other than bidder). All the Spares as per quantity mentioned in the Technical Specification should be supplied which includes earth truck( 1 No ), Vacuum interrupter bottle ( 6 Nos ), Trip Coil ( 4 Nos ), Closing Coil ( 4 Nos ), Auxilliary switch ( 4 nos ), Spring limit switch ( 4 Nos ), Spring Charging Motor ( 2 Nos ) , Breaker position limit switch ( 8 Nos ), VCB Draw out trolley ( 1 Nos ) Make :- ABB/L&T/Schneider Electric/Siemens/CG. Panel shall be procured from OEM or its authorized channel partner.
Supply
Installation
Design, engineering, Manufacturing/procurement, fabrication, assembling, wiring, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning of Standalone Indoor Type IP 44 Enclosure, 11 KV, 800 Amps, HT VCB panel with SC Breaking current of 26.3 kA(rms) for 3 seconds, as per Tender Specification and approved drawings. Power and Control Bus bars used in the Panel shall be Copper Bus Bar and bus bar sizing should be as per MELSON and BOTH Equation published in Copper Development association review Panel has to be configured in the existing SCADA. Panel shall be type tested and all the switch gear should be arc flash resistant. Bidder shall furnish valid type Test certificates already carried out on similar VCB from a reputed institute (other than bidder). All the Spares as per quantity mentioned in the Technical Specification should be supplied which includes earth truck( 1 No ), Vacuum interrupter bottle ( 12 Nos ), Trip Coil ( 8 Nos ), Closing Coil ( 8 Nos ), Auxilliary switch ( 8 nos ), Spring limit switch ( 4 Nos ), Spring Charging Motor ( 4 Nos ) , Breaker position limit switch ( 8 Nos ), VCB Draw out trolley ( 2 Nos ). Make :- ABB/L&T/Schneider Electric/Siemens/CG. Panel shall be procured from OEM or its authorized channel partner.
Supply
Installation
Design, engineering, Manufacturing/procurement, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning and submission of technical documents of 2.5 MVA, 11KV/0.433 V, Dyn11, ONAN, Oil Immersed Step down Transformer, Off circuit tap changer with a tapping range of +5% to -5% in steps of 2.5% on HT side and other accessories as listed in the Tender specifications. The transformer shall be suitable for bus duct termination on LV side and shall be provided with cable termination chamber on HV side. The transformer shall be as per IS 2026. Conservator Tank should be Provided with air cell or diaphragm. Transformers should be Provided with Oil soak pit and design of the same is in scope of Bidder. Transformer should have fault capacity of 65 kA for 1 sec in the LV side. OT/WTI communication should be provided with RS 485 port. Make:- CG/SIEMENS/KIRLOSKAR/VOLTAMP/ANDREWYULE/ALSTHOM. Transformer shall be procured from OEM or its authorized channel partner.
Supply
Installation
Design, engineering, Manufacturing/procurement, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning of 4000 Amps, 415 V, Sandwich Type Bus Duct containing 3 Phase and neutral , copper bus bar for Extending power supply from Transformer LV side to the PCC as per Tender Specification and approved drawings ( Bus duct length should be as per site conditions and location of PCC Panel which will be approx 15 meters for each transformer). Bus Duct system shall be compact, low impedance type, totally enclosed and non-ventilated for protection against mechanical damage and dust accumulation. The busduct system shall be manufactured and type-tested to IEC60529 (Classification of Degree of Protection) to meet the requirement of indoor and outdoor installation. Ingress Protection should be IP55 or better. Phase sequence of Bus Bars in Bus duct shall match with the phase sequence of Transfomer and PCC Panel. Make :- L&T/ Schneider Electric/ Siemens/C&S.
Supply
Installation
Supply
Installation
Design, engineering, Manufacturing/procurement, fabrication, assembling, wiring, pre-dispatch inspection, testing, packing, forwarding, transportation, safe delivery to site, installation and commissioning of 105 AH Ni/Cd battery bank along with float cum boost charger to be able to supply 110V DC for closing and tripping of circuit breakers with spares as per Tender Specification and approved Drawings. Make :- EXIDE/HPL/AMCO/PRESTOLITE/AMARARAJA/UNION/LUMINOUS
Supply
Installation
Supply
Installation
Supply, laying of 11KV(E) grade XLPE insulated , extruded semi conducting Non-Metallic Screen, Copper tape Metallic Screen, PVC ST-2 extruded inner sheathed, Galvanised Steel Round wire armoured, Flame retardant low smoke (FRLS) C-2 PVC ST-2 outer sheathed cable as per IS 7098 (part-II) on wall/column/ground/Trench with all accessories Make:CCI/Universal/RPG/GEM/SPM/Finolex/KEI/Rallisons/Torrent 3 C x 150 Sqmm Aluminium Cable ( Each 1000 Mtrs Drum)
Supply
Installation
Supply and providing indoor end terminations for following sizes of 11 KV grade XLPE insulated & PVC sheathed armoured aluminium conductor cables with RAYCHEM / 3M make heat shrinkable cable termination kits, copper crimping type lugs and other accessories as required for completion of termination in all respects. Make of Lugs: Dowells/Jainson/Braco/Hex/Comet/Connectwell 3 C x 150 Sqmm Aluminium Cable
Supply
Installation
Supply and installation of heat shrinkable straight through cable joint kits of Raychem/3M make for 11KV grade 3C 150 Sq.mm Aluminium conductor XLPE insulated GI armoured Cables
Supply
Installation
Supply, laying of 1100 V Grade, Stranded ( Class 2) Compacted Sector Shaped H2/H4 Grade Aluminium Conductor as per IS : 8130-2013, Extruded XLPE Insulated ) as per IS 7098 Part-1 : 1988, Cores Laid up, PVC Type ST-2 Inner sheathed as per IS: 5831-1984, Galvanised Steel Flat Strip Armour IS : 3975-1999 and Extruded - FR-LSH PVC Type ST-2 Outer sheathed cables Conforming to IS 7098 : Part-1, on wall/column/ground/Trench with all accessories of following sizes. Make: CCI/Universal/RPG/GEM/SPM/Finolex/KEI/Rallisons/Torrent 3.5C 240 Sq.mm Aluminium Cable
Supply
Installation
Supply, laying of 1100 V Grade, Stranded ( Class 2) Compacted Sector Shaped H2/H4 Grade Aluminium Conductor as per IS : 8130-2013, Extruded XLPE Insulated ) as per IS 7098 Part-1 : 1988, Cores Laid up, PVC Type ST-2 Inner sheathed as per IS: 5831-1984, Galvanised Steel Flat Strip Armour IS : 3975-1999 and Extruded - FR-LSH PVC Type ST-2 Outer sheathed cables Conforming to IS 7098 : Part-1, on wall/column/ground/Trench with all accessories of following sizes. Make: CCI/Universal/RPG/GEM/SPM/Finolex/KEI/Rallisons/Torrent 3.5C 50Sq.mm Aluminium Cable
Supply
Installation
Supply, laying of 1100 V Grade, Stranded ( Class 2) Compacted Sector Shaped H2/H4 Grade Aluminium Conductor as per IS : 8130-2013, Extruded XLPE Insulated ) as per IS 7098 Part-1 : 1988, Cores Laid up, PVC Type ST-2 Inner sheathed as per IS: 5831-1984, Galvanised Steel Flat Strip Armour IS : 3975-1999 and Extruded - FR-LSH PVC Type ST-2 Outer sheathed cables Conforming to IS 7098 : Part-1, on wall/column/ground/Trench with all accessories of following sizes. Make: CCI/Universal/RPG/GEM/SPM/Finolex/KEI/Rallisons/Torrent 4C 2.5 Sq.mm Copper Cable
Supply
Installation
Providing end terminations for following sized of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty double compression cable glands, heavy duty long neck copper lugs etc complete with provision of Copper Clamps for gland earthing make of glands/Lugs: Dowells/Jainson/Braco/Hex/Comet/Connectwell 3.5C 240 Sq.mm Aluminium Cable
Supply
Installation
Providing end terminations for following sized of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty double compression cable glands, heavy duty long neck copper lugs etc complete with provision of Copper Clamps for gland earthing make of glands/Lugs: Dowells/Jainson/Braco/Hex/Comet/Connectwell 3.5C 50 Sq.mm Aluminium Cable
Supply
Installation
Providing end terminations for following sized of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty double compression cable glands, heavy duty long neck copper lugs etc complete with provision of Copper Clamps for gland earthing make of glands/Lugs: Dowells/Jainson/Braco/Hex/Comet/Connectwell 4C 2.5 Sq.mm Copper Cable
Supply
Installation
Supply and fixing of following sized of earth flats for earthing by clamping on walls /Trays/Trench with all required accessories 50*6 mm GI Strip ( For Transformer and VCB body and for tray earthings )
Supply
Installation
Supply and fixing of following sized of earth flats for earthing by clamping on walls /Trays/Trench with all required accessories 100*10 mm GI strip ( For Main Grid forming )
Supply
Installation
Supply and fixing of following sized of earth flats for earthing by clamping on walls /Trays/Trench with all required accessories 50*10 mm CU strip ( For Transformer Neutral )
Supply
Installation
Providing pipe earthing stations with copper bonded (min 250 microns of Electrolytic Copper ) electrode (PIP type)of 3.0 Mts long and 80 mm dia including excavation and back filling with maintenance free Ground Enhancing Material (GEM), construction of masonry chamber with inside clearance of 450 x 450 mm with CI cover, earth station markers, testing, inter connecting earth tape between earthing stations and back fill material.etc. complete. Pit should be as per IS 3043 Make: Ashlok, Erico, JEF
Supply
Installation
Supply and Fixing of Copper Braid with clamp for joining all the cable armour strips and connecting to earthing terminals of HT and LT Panels
Supply
Installation
Supply and Installation of SUMIP/Reputed Make Ladder Type FRP cable Tray along with necessary hardware, accessories such as bends, tees, crosses, reducers, spilcer, clamps and fittings required for installation in existing HT and LT cable trench including arrangement of scafolding etc. 450mm x 100mm depth 4mm thickness
Supply
Installation
Supply and Installation of SUMIP/Reputed Make Ladder Type FRP cable Tray along with necessary hardware, accessories such as bends, tees, crosses, reducers, spilcer, clamps and fittings required for installation in existing HT and LT cable trench including arrangement of scafolding etc. 300mm x 100mm depth 4mm thickness
Supply
Installation
Excavation and backfilling in hard ground for laying the cables, back filling with sand for cushioning of cables,bricks for cable protection after laying the cables, consolidation, removal of excess earth, making good of surface to original finish etc complete excluding cost of bricks/Tiles/ Pipes
Supply
Installation
Supply and Installation of 2.5 mm Thick 11KV grade panel front rubber mats, Category III, Class B as per IS 15652.
Supply
Installation
Supply and installation of 300mm dia NP2 class hume pipes with required couplers for road crossing of cables
Supply
Installation
Cutting of roads (1.5m wide and 1m deep) Including removing the soling for laying hume pipes and back filling, Resoling making good the road to the original finish
Supply
Installation
Supply and fixing of 100mm*25mm anodised aluminium cable tags engraved on black back ground with name of the load along with required hardware for fixing the labels on to the cables
Supply
Installation
Relaying of dug roads with 1:2:4 PCC and providing reinforcement with 8mm rods
Supply
Installation
Kulaswaminee Engineerrs (BID ID -3074076)
Konstelec Engineers Limited (BID ID -3077101)
Sabari and Leon Electricals Pvt Ltd (BID ID -3076965)
Modern Electric Company (BID ID -3071275)
Arken Solutions Pvt. Ltd (BID ID -3069605)
shanti enterprises electricals pvt ltd (BID ID -3067527)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .