REPAIRS MAINTENANCE TO WOODEN FURNITURE ITEMS LIKE BEDS CHAIRS TABLES AND SOFAS ETC ISSUED TO OTM MD ACCN UNDER GE NORTH DELHI CANTT 10

Amount

REPAIR TO BED HARD WITH PLY TOP ( FD-246/247) :

S&F in replacement of unserviceable top of bed Hard Plytop/Newar to be made of 12mm thick (7 Ply) commercial plywood, BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with 25mm long steel secrew without having any joints, Make of ply : Green Panel/Green ply/Century shape and size, as per drg and directed by Engr-in-charge.

S&F in replacement of unserviceable long rail of Ist class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as on drg and as directed by Engr-in-Charge.

All as per Srl Item No. 1.02 above but Short Rail/Stiffener.

HEAD REST : Unserviceable ply to be replaced by 3mm thick ply wood both sides of Head Board one side teak faced and other side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12mm dia beading made to shape as shown on drg or directed by Engr-In-Cahrge.

FOOT REST : All as per Srl Item No. 1.04 above but foot rest.

HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4'x4'x6mm, suitable type of MS Screws and as per drg and as directed by Engr-in-Charge

FOOT REST : All as per Srl Item No. 1.06 above but foot rest.

S&F of MS corner bracket in right angled shape of size 4"x4", 6 mm thick with Six holes duly painted with black enamel paint after applying the one coat of red oxide primer with suitable MS Screws to the bed as directed by the Engr-in-Charge.

M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 3.00 to 25.00 including preparation and S&F new Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawings and as directed by Engineer-in-Charge :

REPAIR TO TABLE DINING FOR 8 PERSONS (FD-273, FD-376) :

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19mm thick Ext grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

REPAIR TO TEAPOY WOODEN (FD-232/278/382) :

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19mm thick Ext grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

REPAIR TO TABLE PEG (FD-384/277)

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

REPAIR TO TABLE WRITING (FD-275)

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19mm thick Ext grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Legs made of Ist class hard wood (Teak wood).

Side/Bottom Rail made of Ist class hard wood (Teak wood).

Front/Back Rail made of Ist class hard wood (Teak wood).

Centre Stiffener made of Ist class hard wood (Teak wood).

S&F in repairs shutters to be made of 18mm thick prelaminted both sides MDF board of ext grade edging all around with teak wood beading of 4mm thick with piano type hinges/MS Hinges with approved SS knob/Handle.

S&F drawer to be made of sides and back of 12mm thick teakwood Plank , bottom of 6mm thick commercial plywood , Front top of 18mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles bears including removing of unserviceable drawer..

S&F in replacement of unserviceable back ply shall be 6mm commercial ply BWR of size as existing. .

REPAIR TO TABLE CENTRE/ 2 TIER (FD-274)

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19mm thick Ext grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Legs made of Ist class hard wood (Teak wood).

Front rail made of Ist class hard wood (Teak wood).

Side Rail/stiffener made of Ist class hard wood (Teak wood).

REPAIR TO TABLE 900X600X760MM WITHOUT DRAWER (FD-284)

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19mm thick Ext grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Legs made of 1st class hard wood (Teak Wood)

Front rail made of 1st class hard wood (Teak Wood)

Side rail made of 1st class hard wood (Teak Wood)

Side stiffener made of 1st class hard wood (Teak Wood)

Centre Stiffener made of 1st class hard wood (Teak Wood)

REPAIR TO TABLE DINING FOR 6 PERSONS (FD-273) :

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19mm thick Ext grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

REPAIR TO TABLE DRESSING LADIES WITH MIRROR (FD-32(M)/251/378/MAP) :

S&F in repairs unserviceable looking mirror 5mm thick Make: Modi Guard/Atul along with new 6mm thick commercial plywood back of mirror frame. Make: Green ply/Archid/Century Ply

S&F Glass panes of shutters made of 5mm thick plane glass with sliding studs as existing of Make: Modiguard/Saint Gobain with aluminium sliding .

New 1st class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete.

S&F in repairs, unserviceable Back of the Table made of 12 mm thick Ply wood as shown in Drg.

S&F new drawers as per drawing

REPAIR TO TABLE DRESSING GENTS WITH MIRROR (FD-230) :

S&F in repairs unserviceable looking mirror 5mm thick Make : Modi Guard/Atul along with new 6mm thick commercial plywood back of mirror frame including two coats of French Polish to all parts. Make:- Green ply/Archid/Century Ply/KitPly

S&F new drawers as per drawing

Top/Bottom of made of 18/19mm thick Exterior grade MDF Board both sides laminated as shown in Drg.

Sides/Partition of box of table dressing made of 18/19mm thick MDF Board both sides laminated.

Back of the box of table dressing made of 18/19mm thick MDF Board both sides laminated.

REPAIR TO TABLE BED SIDE (FD-276:

Back ply of table bed side 6mm commercial ply Make:- Kit ply/Archid Ply/Green Ply/Century Ply

Sides of table bed side of exterior grade prelamintaed MDF Board 18/19mm Make: Bhutan Board/Nova Pan/Action Tesa/Green Panel Max

Shelf of table bed side of exterior grade prelamintaed MDF Board 12mm Make: Bhutan Board/Nova Pan/Action Tesa/Green Panel Max

Top/Bottom of table bed side of exterior grade prelamintaed MDF Board 18/19mm Make: Bhutan Board/Nova Pan/Action Tesa/Green Panel Max

REPAIR TO HAT STAND WITH MIRROR (FD-233 ) :

S&F Peg hook brass as per drg.

S&F in replacement of unserviceable mirror with new mirror 5mm thick of make : Atul/Modiguard/Saint Gobain

M&L in replacement of unserviceable front ply and S&F new ply 3/4mm thick one side teak faced

M&L in replacement of unserviceable Back ply and S&F new ply 3/4mm thick

REPAIR TO SOFA SET 3 PCS 5 SEATER (FD-258/281)

Arms made of 1st class hard wood (Teak wood)

Wooden batten of seat frame made of 1st class hard wood (Teak wood))

Wooden batten of back frame made of 1st class hard wood (Teak wood))

Front rail of seat of 3 Seater Sofa made of 1st class hard wood (Teak wood))

Side rail of seat of 3/1 Seater Sofa made of 1st class hard wood (Teak wood))

Front rail of seat of single Seater Sofa made of 1st class hard wood (Teak wood))

12mm thick commercial plywood BWR grade for seat of three seater Sofa, FD - 258

12mm thick commercial plywood BWR grade for seat of Single seater Sofa, FD - 258

S&F in replacement foam cushion (ISI Marked IS-1741) (Make : Sleep Well/Kurl-On) 10 Nos in each set for sofa 3 pieces, 5 seater. Size of cushion 22"x21"x4" thick foam of 40 density for seat & back covered with superior quality tapestry cloth not less than Rs. 180/- per metre as approved by GE/Engr-in-charge. NOTE: The foam cushion in original packing with warranty card and tapestry cover (with zip opening system) shall be brought seperately at furniture yard and after inspection the same shall be fixed.

Removing of old unserviceable tapestry cloth from existing foam cushion and supplying and fixing superior quality tapestry cloth, size of the cover should be 22"x21"x4" with Zip opening system of best quality easy to removeable and washable not less than Rs 180/- per metre as approved by GE/Engr-in-Charge to the foam cushion (10 Nos in each set) as per existing. Complete all as directed.

REPAIR TO CHAIR DINING JCOs/ORs (FD/MAP-II/15) :

Removing of unserviceable seat and S&F new PVC seat of chair shall be made from PVC seat 4mm x 10mm thick ribs moulded along with seat in single piece. PVC seat 4mm thick hole and wt of PVC seat is not less than 0.5 Kg. Make ; Amko as per shown in drg & as directed by the Engr-in-Charge.

Stiffners made of 1st class hard wood (Teak Wood).

Rear Legs made of 1st class hard wood (Teak Wood)

Front Legs made of 1st class hard wood (Teak Wood).

Side Rails made of 1st class hard wood (Teak Wood).

REPAIR TO CHAIR DINING ( FD - 16 (M) /FD - 279) :

Rear Legs made of 1st class hard wood (Teak Wood)

Front legs made of 1st class hard wood (Teak Wood)

Stiffners centre/side made of 1st class hard wood (Teak Wood)

Bend Stiffners for back rest made of 1st class hard wood (Teak Wood)

Side rails made of 1st class hard wood (Teak Wood)

REPAIR TO CHAIR WRITING ( FD - 20 (M) FD - 280) :

Rear Legs made of 1st class hard wood (Teak Wood)

Front legs made of 1st class hard wood (Teak Wood)

Side rails made of 1st class hard wood (Teak Wood)

Arms made of 1st class hard wood (Teak Wood)

Stiffners made of 1st class hard wood (Teak Wood)

REPAIR TO CHAIR EASY (FD - 17 (M) FD - 229) :

Legs made of 1st class hard wood (Teak Wood)

Side rail for seat made of 1st class hard wood (Teak Wood)

Front/Back Rail for seat made of 1st class hard wood (Teak Wood)

Arms made of 1st class hard wood (Teak Wood)

REPAIR TO STOOL DRESSING CB (FD- 282 ) :

Legs made of 1st class hard wood (Teak Wood)

Side/Front rail for seat made of 1st class hard wood (Teak Wood)

Centre/Short Stiffners made of 1st class hard wood (Teak Wood)

REPAIR TO BIN SOILED LINEN (FD- 244) :

New bottom frame with legs made of hard wood ( Teak Wood).

Front and back ply with new 6mm thick commercial ply one side teak faced

Top ply with new 6mm commercial ply one side teak faced.

REPAIR TO CHAIR EASY CUSHOINED Drg No. (TP) -

S&F in repair approved upholstery like FRC sheet 80 mm Markeen, Hassian cloth and tapestry cloth first quality for chair writing cushioned for seat and back including taking down the old unserviceable upholstery. Note : Colour, shade, texture design pattern and quality of tapestry cloth shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 180.00 per RM complete all as directed by the Engr-in-Charge.

Legs made of 1st class hard wood (Teak Wood)

Side rail for seat made of 1st class hard wood (Teak Wood)

Front/Back Rail for seat made of 1st class hard wood (Teak Wood)

Arms made of 1st class hard wood (Teak Wood)

REPAIR TO TABLE 900X600X760MM WITH DRAWER (FD-284)

Removing of unserviceable top of table in any positon and S&F new top made out of 18/19 mm thick Ext grade prelaminated both sides MDF board of approved shade Make:- Action Tesa/Kit Ply/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Legs made of 1st class hard wood (Teak Wood)

Front Rail made of 1st class hard wood (Teak Wood)

side Rail made of 1st class hard wood (Teak Wood)

side stiffener made of 1st class hard wood (Teak Wood)

Centre Stiffener made of 1st class hard wood (Teak Wood)

REPAIR TO TV TROLLEY (FD/E6/MAP/04(R):

Removing of unserviceable top of TV Trolley in any positon and S&F new top made out of 18/19mm thick Ext grade prelaminated particle board of existing shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) to be fixed with steel corner bracket as directed by Engr -in-Charge.

All as per ser No 23.01 above but left/right side of TV Trolley

All as per ser No 23.01 above but back side of TV Trolley

All as per ser No 23.01 above but bottom side of TV Trolley

S&F in replacement of unserviceable rollers with SS base and screws to the base of the TV Trolley

S&F in replacement of unserviceable front shutter glass with fitting arrangements

Removing of unserviceable channels in any position, S&F new steel channels with screws (ISI Marked).

S&F new SS handles for drawers of approved shape and size as directed by Engr-in-Charge

CHAIR DINING CUSHIONED (FD/MAP/-II/04)

Supplying and fixing in replacement of unseviceable seat foam of 75mm thick 40 density covered with superior quality tapestry cloth/Rexine of approved shade of premium quality as directed Engr-in-charge.

Supplying and fixing in replacement of unseviceable seat cover with superior quality tapestry cloth/Rexine of approved shade of premium quality as directed Engr-in-charge.

Rear Legs made of 1st class hard wood (Teak Wood)

Front legs made of 1st class hard wood (Teak Wood)

Stiffners centre/side made of 1st class hard wood (Teak Wood)

Bend Stiffners for back rest made of 1st class hard wood (Teak Wood)

Side rails made of 1st class hard wood (Teak Wood)

REPAIR TO TABLE DINING 4 PERS (FD/MAP-II/03) -

Removing of unserviceable top in any position and S&F new top made out of 18/19mm thick exterior grade prelaminated both sides MDF board of approved shade Make : Action Tesa/Kit Ply/Green panel (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr-in-Charge.

Long rail made of Ist class hard wood (Teak wood).

Short side rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Wooden corner brackets of size 75x75x25mm

Wooden corner brackets of size 65x65x20mm

S&F of SS knobs of approved quality.

M&L for removing the existing unserviceable eye hook and S&F new MS eye hook all as specified, complete in all respect at site.

S&F of PVC shoes of white colour as approved by Engr-in-Charge.

Labour for removing the unserviceable worn out / broken cane & re-canning with new plastic cane of not less than 1.8mm wide x 0.46mm thick and border caning atleast 3.5mm wide as per Godrej pattern including total scrubbing & cleaning of surfaces tightening the frame for chair dining, chair writing, chair easy, stool dressing, Bin soiled linen, etc. Complete all as specified and as shown in drgs. and as directed by Engineer-in-Charge.

Labour for cleaning, mild grinding and preparation of old treated wooden surfaces of any description, filling of cracks with putty and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge. Note:- The work is to be executed at BSO furniture yard as well as at various Units locations and sites under the AOR of GE (North) Delhi Cantt-10

Bed plywood top FD - 213/246

Bin soiled linen FD -15/244

Chair Easy FD - 17/229/TP

Chair Writing FD - 20(M)/280

Chair Dining FD - 16/279/MAP

Table dining 8 pers FD-30/239/273

Table 900x600x760mm w/drawer FD-41/283

Table writing FD - 33/275

Peg table FD - 25/277

Table bed side FD - 28/276

Table dressing Gents FD-230/382/379

Table dressing Ladies FD- 251

Table centre FD-214/274

Side Board FD 26/241

Sofa set 5 seater FD - 281/373/258

Book Case (FD-356)

Stool dressing FD 27/252/282

Hat stand FD-206/233/362

Table dining 4 pers (FD/MAP-II/03)

Teapoy wooden FD-232

Chair dining cushioned (FD/MAP/-II/04)

Chair Dining (FD/MAP-II/15)

Table 900x900x760mm FD-274

SMS Enterprises

M/s Adhikari construction co.

O.K. ENTERPRISES

SARGAM ENTERPRISES

M/S NEHAL ENTERPRISES