ROVN OF SANITARY BLOCKS WITH ALLIED SERVICES AT HRDC BLDG AND AT NO 2 INF BN AND PROVN OF FALSE CEILING AT BLDG NO P-27A (COOK HOUSE) AT UDAIPUR MIL STN.

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil Complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil Complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass-concrete Type D2 1:4:8 (40 mm graded aggregate) etc, Complete all as specified and directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil, Complete all as specified and directed.

M&L for formwork to sides and soffits of plinth beam, sides of footings, bases of columns and similar work with rough finished surfaces etc, Complete all as specified and directed.

M&L for formwork to sides of columns and similar work with rough finished surfaces etc, Complete all as specified and directed.

M&L for formwork to sides and soffits of beam, lintel rough finished surfaces etc, Complete all as specified and directed.

M&L for form work to soffits of suspended slabs, such as roof slabs and similar work; not exc. 200 mm thick for flat rough finish surfaces, Complete all as specified and directed.

Formwork to chajjas including edges flat rough finished surfaces of concrete, Complete all as specified and directed.

Formwork to edges of concrete flats and similar works exc. 10 cm & not exc. 20 cm wide with rough finished surfaces etc, Complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in footings & plinth beams etc, Complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in columns etc, Complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof beams & lintel beam etc, Complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in chajjas, Complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof slabs supported on walls etc, Complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, stirrups, spacers & binders & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub-class `B' bricks built in CM 1:4, straight or curved on plan exceeding 6 M mean radius using old size bricks in half brick thick wall etc, all as specified and directed.

M&L harcore of gauge n.exc. 63mm, deposied, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface of broken stones or boulders.

M & L for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame for and including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CECZ TD -219 sheet 1/3 to 3/3 as applicable complete all as specified and directed. Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed.

Supply & fixed for sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square n.exc 0.5 Sqm each and glazing with oil putty to steel window complete all as specified.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately)

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick works or on one side of lathing, all as specified and directed.

M/L rendering 5 mm thick in CM 1:3 on concrete surface of ceiling & finished even & smooth without using extra cement.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

M & L coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.09 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

M & L coloured Glazed ceramic tiles in vertical serfaces 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, complete all as specified and directed.

M&L for 15-18 mm thick green marble slabs on platform/shelf/flooring/cill etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete.

Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixing to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number and minimum 02 Nos. for horizontal member), complete all as specified.

Supply and fixing factory made 30 mm PVC rigid foam panel door shutter made from mild steel tubular frame of size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails and covered with 5 mm thick head moulded PVC channel having width of 50 mm to form stiles and PVC street of width 75 mm to form rock rail, bottom rail and top rail or either side having panels inserted with 5 mm thick PVC sheet sealed with solvent cement adhesive to the stiles and rails with 5 mm x 25 mm PVC sheet beading on either side including three Nos. aluminium hinges for each door complete all as per manufacturer instructions complete all as specified.

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

S&F Aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

Supply & fixed Powder coated aluminium ventilator fixed type without sash bar, aluminium section weighing 0.55 kg/Rm including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified.

Supply & fixed for poder coated aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with H or F channel all as specified and directed.

Supply & fixed steel for 5mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge. (Make:Parryware/Hindware/Jaquar)

S&F Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (excluding fixing bolts, flushing cistern & flush pipe). (Make:Parryware/Hindware/Jaquar/Prayag)

S&F Plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge. (Make:Parryware/Hindware/Jaquar/Prayag)

S&F vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed. (Make:Parryware/Hindware/Jaquar/Prayag)

S & F in repair vitreous china half stall urinal white with grating including connection to flushing pipes and out going pipes and brackets etc. (Make:Parryware/Hindware/Jaquar/Prayag)

S/F in repair brass chromoim plated auto closing self cock with and including urinal flusher/spreader & connecting pipe for fixing with 15 mm bore pipe etc. (Make : Parryware/Jaquar/plumber)

PVC waste pipe for WHB 32 mm in size complete all specified and directed by Engineer-in-Charge. (Make:Parryware/Prayag/plumber)

S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge. (Make: parryware/Jaquar/Prayag)

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. (Make:Parryware/Prayag/plumber)

S & F CP jet spray with flexible tube etc complete all as specified & directed. Make: Make: Jaquar Essco ( CAT No-ALE-547) or Equivalent

S&F in repair 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-TQT-526AF) or Equivalent

S&F in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-TQT-526) or Equivalent

S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating with or wothout hole fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified. (Make : Parryware/Jaquar/plumber/Prayag)

S&F in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge. Make: Jaquar Essco ( CAT No-TQT-510A) or Equivalent.

S&F in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-TQT-511) or Equivalent

S&F 15mm bore tubes medium grade galvanized with all fittings such as Tees, elbows, unions, sockets, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up old GI tubing all as specified and directed by Engr-in-charge.

S&F 20 mm bore tubes medium grade galvanized with all fittings such as Tees, elbows, unions, sockets, short, lengths, plus etc. and fixed complete to walls and ceilings or laid in floors of any length including taking down or up old GI tubing all as specified and directed by Engr-in-charge.

S&F Rotational molded polyethylene water storage tanks white in colour tripple layered (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. (Make:- Sintex/ Rotex/ Polycon)

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed by Engr-in-charge.

Supply & Fixed for 100 mm bore cast iron soil waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

Supply & Fixed for 75 mm bore cast iron soil waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

Supply & Fixed cast iron bends 100mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixed cast iron bends 75 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixed 100 mm bore cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

Supply & Fixed 75 mm bore cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

Supply & Fixed 100mm bore cast iron bends with oval access doors (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixed 75 mm bore cast iron bends with oval access doors (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Material and labour for 75/100 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed.

S & F cost Iron slotted cowls for 100 mm bore dia pipe etc all as specified.

M&L Cement concrete in floors 40mm thick over sub base (1:2:4) using 20mm graded aggregate finished even and smooth without using extra cement, all as specified and directed.

Material & Labour for preparing new plastered surfaces and applying three coat of white wash on wall complete all as specified and directed.

Material & Labour for preparing new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer/white wash complete all as specified.

M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed, complete including testing etc all . (concrete bed shall be measured and paid for separately).

M&L for concrete bed to drain pipes for 150mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required, Internal dia of pipe 150mm complete all as specified.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Material and labour for carrying out water proofing treatment for roofs in the following stages and as directed :-

(i) Material and Labour for 10mm thick plaster in CM 1:4 with WPC will be applied over the roof slab. After the plaster is cured the roof will be tested for water tightness by pounding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment.

(ii) The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, moss dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls), around obstacles such as pipes, chimneystacks, etc and other similar situation to ease up about comers.

(iii) Bituminous based primer conforming to IS : 3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated.

(iv) After the application of approved bituminous primer the APP modified polymeric membrane of thickness 3 mm & weight not less than 3 Kg/Sqm shall be laid & sealed on the primed surface by torch application as per manufacture instructions. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be made as a monolithic layer.

(v) All joints and changes in direction should be curved with cement mortar 1:3 mixed with & including SBR latex @ 200ml per bag of cement and cured well before laying the membrane.

(vi) A fillet of PCC 1:2:4 of 100 x 100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/ junctions should be rounded.

(vii) Applying two coats of silver shield aluminium based paint @ o.1 Kg/Sqm each coat over APP membrane.

M&L for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6. (Make-H & R Johnson, Brand-Endura digital designer series or equivalent)

Supply and Fixed suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 6 mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

S&F GI Tubes, medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 50mm bore complete all as specified.

Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required complete all as specified.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material & Labour for preparation of new plastered surfaces of wall and applying 1 mm thick Birla/JK wall care white putty in two layers for neat and smooth finishing including preparation complete all as specified.

Material & Labour for point wiring with 1.5 Sqmm multistranded 1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongthwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc all as specified (Make of cable : Kalinga/Havells/Anchor) for one light point/Fan/bell point controlled by one switch.

(a) One light point controlled by one 5 Amps switch

(b) One fan point controlled by one 5 Amps switch

(c) One socket 3 Pin 5 A pin socket outlet 5 Amps on same board with cables 1.5 Sqmm size

(d) One socket 3 Pin 5 A pin socket outlet 5 Amps on independent board with cables 1.5 Sqmm size

Supply & Fix lamp holder Angle/batton type insulated body with back plate and to be fixed on PVC bock including dismantling old one. Make : Anchor/Leader/Kinjal.

Supply & Fix socket outlet 5 pin 5/6 amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make : Anchor/Leader/Kinjal.

Supply & Fix ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor/Leader/Kinjal.

Supply & Fix of LED integrated batten tube light fittings 20/22 watt 4 feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specified and directed.

Material & Labour MCB SPN DB sheet metal enclosure single door suitable for mounting MCB 240 Volts busbar 2 way including dismantling one Make : Havells / Legrand / Schneider / standard.

Supply & Fix MCB SPN 230 volts 40 Amps. Make : Havells / Legrand / C&S / standard.

Supply, laying and testing cable XPLE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade wuth standard aluminium conductor of size 10 Sqm 2 core.

Supply & Fix exhaust fans AC single phase 230/240 volts of size 150/200 mm sweep with louver and complete accessories including making hole with suitable size for exhaust fan after completion of work finishing with cement and plastering and repainting with existing colour ll as specified and directed by Engineer-in-Charge.

Punjab Traders