RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Composite Hand Held Terminal ( 600 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Specification Display Size (Minimum) (inch) 5 5
Required6
Required7
Required8 Or higher Display Type Scratch Resistant Multi- point Capacitive Touch Screen * 1/6 Display Resolution (Pixels) HD * LED Backlit Display Yes * Brightness (Minimum) (Nits) 400 400
Required500 Or higher Processor ( Mobile ARM Architecture) Quad Core Quad Core
RequiredOcta Core Or higher Processor Speed (GHz) 1.1 1.1 - 2.0 Or higher Operating System Android 5.1 or higher Android 5.1 or higher RAM (MB) 1024 1024
Required2048
Required4096 Or higher Inbuilt Storage (Flash Memory) minimum (GB) 8 8
Required16 Or higher Storage Expandability through Micro SD Card (GB) 32 * Camera Yes Yes If available
RequiredCamera Resolution 5 MP or Higher 5 MP or Higher Or higher Key Pad Soft in case of Touch Screen * Interface USB 2.0 or higher * WI-fi Connectivity Yes * Bluetooth Connectivity Yes Yes GPS Feature Yes Yes GSM 4G/LTE 4G/LTE
RequiredVoLTE Or higher Number of SIM Slots Available Dual SIM * NFC Connectivity Supported * SAM Slot Yes * Built-in Speaker Yes * Inbuilt QR Barcode Scanner Yes * Inbuilt Finger Print Scanner (STQC Certified) Yes Yes If Yes
RequiredInbuilt Finger Print Scanner specification Aadhaar enabled In- built finger print scanner with latest certification. UIDAI/STQC certified Aadhaar enabled In- built finger print scanner with latest certification. UIDAI/STQC certified 2/6 finger print sensor and Scratch resistant sensor surface
Requiredcompatible with Android 5.1 or higher Available finger print sensor and Scratch resistant sensor surface
Requiredcompatible with Android 5.1 or higher Available In built Contact smart card Reader and Writer Yes Yes If Yes
RequiredIn built Contact smart card Reader and Writer Specification Inbuilt Minimum 1 number of contact type smart card reader & writer (SCOSTA Compliant) Inbuilt Minimum 1 number of contact type smart card reader & writer (SCOSTA Compliant) In built Debit/Credit Card Reader Yes Yes If Yes
RequiredIn built Debit Credit Card Reader specification Inbuilt/Integrated IC Card and MSR Card Supported with PCI 4.0 or higher Compliance and EMV L1 & L2 (Europay
RequiredMaster Card and VISA) certification. Supplier/OEM to ensure all required testing and integration with Merchant bank payment System at their own cost from Day 1. Inbuilt/Integrated IC Card and MSR Card Supported with PCI 4.0 or higher Compliance and EMV L1 & L2 (Europay
RequiredMaster Card and VISA) certification. Supplier/OEM to ensure all required testing and integration with Merchant bank payment System at their own cost from Day 1. Integrated Printer Yes * If Yes
RequiredPrinter Specifications Minimum 2” thermal Dot Matrix Printer integrated with hand held device * Software Development Kit (SDK) Appropriate SDK need to be provided along with device * Battery Chemistry Li-Ion * Battery Capacity (mAH) 4000 * Indicative Battery Back up Minimum (Device in operation while all function of device active)(hr) 8 * Battery Status Indicator Yes * Connectivity (presence/absence) Indicator Yes * Signal Strength Yes * 3/6 Indicator All necessary Accessories like carry case and User Manual etc to be supplied with the equipment Yes * Terminal Management Device is remotely manageable in secured mode through functionality like MDM and TMS/MDM with source code is part of supply * Certification Available UL
RequiredCE
RequiredRoHS
RequiredFCC * Ingress Protection (IP) Rating 54 54
Required65
Required66
Required67 Or higher Drop/Free Fall Test Compliance Drop/Free Fall test in unpacked
Requiredswitched off and normal handling conditions (Height: 1.2 m
RequiredTotal No. of falls:2) * Vibration Test Vibration Test should be in packed condition
Requiredswitched off condition (10-150Hz
Required0.15mm/2g
Required10 sweep
Requiredcycles/axes) * Bump Test Bump test should be in packed condition
Requiredswitched off condition. (1000 Bumps
Required40g
Requiredin vertical position) * Operating Temperature Range -10 Degree C to 50 Degree C * Operating Humidity Range 10% to 90 % Non Condensing * Dimensions (H x W x L) (mm x mm x mm) - * Weight (gms) - * BIS Registration under Compulsory Registration Scheme Yes * BIS Registration number under Compulsory Registration Scheme & its Validity - * Availability of Test Reports from Central Govt/NABL approved ILAC acredited lab to Yes * 4/6 prove conformity to the specification (Test reports are to be furnished when demanded by buyer) If Yes
RequiredTest Report Number - * If Yes
RequiredTest Report Date - * If Yes
RequiredName of the Lab - * If Yes
RequiredAddress of the Lab - * On Site OEM Warranty (Years) 3 3 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
