Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 CrAccepted-AOC NO 6 7 TEACHER RAJAMANICKAM 3RD STREET CHENNAI BANGALORE NH SHENBAKKAM VELLORE 632 008 | VELLORE | TAMIL NADU | 632008 | ₹28.6 Cr Quoted ₹29.7 Cr | L1 | Accepted-AOC Lowest Tenderer |
| 2 | L2₹30.7 CrRejected-Finance | ₹30.7 Cr | L2 | Rejected-Finance Among the Three Bidders the Highest Rate quoted by SRI PATHY ASSOCIATES PRIVATE LIMITED |
| 3 | L3₹30.9 CrRejected-Finance NO 30 PERIYAR NAGAR ERODE 638001 | ERODE | TAMIL NADU | 638001 | ₹30.9 Cr | L3 | Rejected-Finance Among the Three Bidders the Highest Rate quoted by SEA ROCK INFRASTRUCTURE |
Tender Value
₹28.3 Cr
EMD Value
₹14.3 L
Closing Date
3 Aug 2023, 3:00 pmClosed
Special Chief Engineer
Special Chief Engineer, WRD., Upper Palar Basin Circle, Vellore-6
Formation of road on the right bank of Koundanya Mahanadhi river from Thalayatham to Sempalli Road in Gudiyatham Town of Vellore District.
2023_WRD_350768_1
e-Tender Short Term Notice No.01 UPBC /Vellore /F-
Open Tender
Civil Works
545 days
Gudiyatham
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹14.3 L
16 Jun 2024
27 Jul 2023
4 Aug 2023
27 Jul 2023
3 Aug 2023
27 Jul 2023
Amount
Excavation for Roadway and drainage Excavation including removal and satisfactory disposal of all materials necessary for the construction of roadway and side drains in accordance with the specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer, as per MORTH Specification Nos. 111, 112, 301, 305 & 900
Gravel Filling including cost and conveyance of all materials including cost of cement at site including cost and labour charges for formwork, soft water labour charges for formwork soft water, etc., asper relevant standard specification
Granular Sub-base with Graded Material (Table:- 400-1) - Plant Mix Method - Construction of Granular Sub-Base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc., complete as per clause 401 of MORTH Specification Nos. 111, 112, 401 & 900 - For Grading - V Material.
Granular Sub-base with Graded Material (Table:- 400-1) - Plant Mix Method - Construction of Granular Sub-Base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc., complete as per clause 401 of MORTH Specification Nos. 111, 112, 401 & 900 - For Grading - III Material.
Wet Mix Macadam (Table 400-13) - Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, Complete as per clause 406 of MORTH Specification Nos. 111,112, 406 & 900.
Prime Coat - Providing and applying Primer Coat with Bitumen Emulsion (SS-I type) on prepared surface of granular Base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 502 of MORT&H Specification No. 111 - Over WMM.
Tack Coat - Providing and applying tack coat with Bitumen Emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous / granular surface cleaned with mechanical broom as per clause 503 of MORTH Specification Nos. 111, 112, 501, 503 & 900 - Over granular surfaces treated with Primer.
Dense graded Bituminous Macadam (Table - 500 - 10) (providing and laying dense bituminous macadam with Hot Mix Plant using crushed aggregates of specified grading, premixed with bituminous binder (Viscosity Grade - 30) at percentage specified by JMF by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction Grading II as per MORTH Rev. V Specification Nos.111, 112, 505, 900.
Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5
Excavation for Roadway and drainage Excavation including removal and satisfactory disposal of all materials necessary for the construction of roadway and side drains in accordance with the specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer, as per MORTH Specification. Using Excess Box Cut Earth for Berms including Compaction by power roller. MORTH No. 111, 112, 301, 305, 900
Sand for filling from approved Quarry including cost and conveyance at work site to departmental officers etc., complete, complete as per standard specification.
Supplying and laying vibro compacted M40 grade heavy duty road paver interlocking blocks with super embeded and skid texture design the international standard with zig lay design for higher interlocking capacity rate illusive of cost of materials transporation to the side from the factor including all labour charges for laying shifting compacting with power libratory and all taxed etc., complete as per standard specification. (83mm)
Vibrate Cement Concrete M15 (Nominal mix 1:2:4) using 20mm ISS size HBG metal including cost and conveyance of all materials to worksite and cost of cement at site including cost of soft water, labour charges for mixing, transporting, laying, curing working at depths, tools and plants etc. complete as per standard specifications for Stem portion as per MORTH No 1000, 1500, 1700, 2200
Earth Work Excavation for foundation in all soils and sub soils and to full depth as may be directed by the Departmental Officers except hard rock requiring blasting including shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated soil in layers not exceeding 15 cm thick, well rammed and consolidated and depositing including all initial leads and initial lifts, etc., complete complying with standard specifications and as directed by the departmental officers (open excavation)
Providing and placing in position of plain cement concrete M 15 using hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers
Supplying and laying of ready mix for M 25 grade of concrete having charaterstic strength not less than specified in the IS 456 - 2000 using Ordinary portland cement with minimum cement content of 300 Kg / cum confirming to IS 8112. Coarse aggregates having a specific gravity of 2.60 using 20 mm down graded hard blue granite broken stone jelly and fine aggregate without flyash as per IS 383 - 1970 ( 2007 ) with suitable water cement ratio not less than 0.45 and not exceeding 0.50 of water quality confirming to IS 456 - 2000 including use of plasticizer of approved make & dosage of required grade at all locations and levels with specified high workability as per IS 1199 - 1959 ( 2004 ). The initial & final setting time confirming IS 12269 - 1987 ( 2004 ) with maximum temperature of concrete at the time of placing should not exceed 32 0 C. The admixtures affecting the quality and strength of the concrete should not be used and should confirm IS 9103 - 1979 [ usual admixture - Air entraining & water reducing ]. Iincluding the cost of hire charges for pump and pumping charges to the required locations & levels as specified by the Engineer - in - charge,. laying, compacting, consolidation by using vibrators, finishing, watering, curing, testing charges as per IS 456 - 2000, 4031 - ( Part 3 & 6 ) / 1988 ( 2005 ) & ( Part 2 ) / 1999 ( 2004 ) and 516 / 1959 ( 2004 ), 4926 - 1976 ( 1990 ), mix design details to be got approved before commencement of the work adopting pour card system and other OK cards. Excluding the cost of form works, centering and shuttering placed in position etc, complete complying with standard specifications and as directed by the departmental officers. (RCC work)
Providing and placing in position of plain cement concrete M 20 using hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers
Supplying and fabricating and placing in position RTS rods of various sizes for all Reinforced Cement Concrete works including cost and conveyance of steel and binding wire, labour charges for cutting and bending, laying in position and tying with binding wire as directed by the Engineer in charge of work and complying with technical specifications.
Supplying and erecting centering for vertical plain / RCC concrete walls of supply channel, retaining wall etc for following height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers
Filling under the box culvert with stone Dust to required tk below the foundation concrete including cost and conveyance of all materials to site form any approved source satisfying the standard and specification and all labour charges for filling in layers compacting, ramming to obtain the maximum density by watering to obtain the maximum density by watering with all leads for water including all other incidental charges such as bailing out water if necessary forming protective bunds etc., complete
Providing and placing in position of Plain Cement Concrete M 10 using M sand and hard blue granite broken stone jelly of size 40 mm mixing with mixer machine and laying including the cost of bailing/pumping out of surface water wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers
Providing and placing in position of plain cement concrete M 15 using hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers
Below G/L
Above G/L
W-0221- Supplying and fixing 300mm wide PVC EXPANSION JOINT in the 20mm expansion gap provided in between decks over piers and in between deck and dirt wall over abutment as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealant etc., complete.
Supplying and fixing PVC water stopper heavy duty of 300 mm width as per IS 15058 / 2001, including cost of all materials, labour charges, etc complete complying with standard specifications and as directed by the departmental officers
GST 18% IN FIGURES
SRI PATHY ASSOCIATES PRIVATE LIMITED
SEA ROCK INFRASTRUCTURE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid