Renovation of SPM Cell at Ground Floor, NHM Block, Swasthya Bhawan, Jaipur.

Amount

Supply of Executive High back Revolving chair -: The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric the insert molded foam is assembled over a load bearing plastic seat cover. The back shall made up of two piece injection molded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W) 48.5cm, (H)-62.0cm & size of seat shall be (W)- 52.5cm x (D)-51.0cm.armrest shall be injection moulded with height adjustable up to 4.5+/- 0.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchronic mechanism, Tilt tension adjustment, 3 position tilt limiter with AntiShock feature. Spine bracket shall made of Aluminum die cast piece connecting back with mechanism. Neck rest assembly shall made p of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up to 4.5+/-0.5cm up-down and has regular adjustment of 30 degree +/- 2. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon. Overall dimensions of Chair shall be, Width of Chair - 71.0cm, Depth of Chair - 71.0 cm as measured from pedestal below. Height from ground - min 115.5 to max 131.0 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete in all respectas per design and approved by Engineer in charge.

Supply of Mid back revolving chair having crome S.S. finished soft cousined handel, M.S base, hot press ply structure, fixed arms with seat and back, leaherite tepastry on seat and back, with 5 wheel base in all respect as per desing and approved by enginner in charge,

Supply of Center Table 12 mm thick glass clear top, overall size 3'x2'x18". The glass will be set in wooden frame with oriental style, moulding on the frame complete in all respect as per design & sample approved by engineer-in-charge. Center Table size 3'x2'.

Supply of visitor chair, PU Arm capsule, 25mm round pipe used for back legs and 25mm capsule tubelar pipe used for front legs, hot pressed ply structure, complete in all respect as per desing and approved by engineer in charge.

Supply of Airport: bench as per sample approved having perforated seat and back of size 50cmx50cm made out of 1.2mm thick cold rolled steel powder coated perforated seat fixed with triangular support from back with hole design and in curved shape on top and bottom for maximum, conform fixed with galvanized nut and bold. The triangular centre beam of 17cms x 17cms x 11cms made out of 12mm thick cold rolled steel duly power coated fitted with plastic packing & galvanized nut, bolts, arms and legs also made out of 1.2mm thick cold rolled powder coated steel sheets with plastic pads and supports. 3 Seater - Length 1765mm, Height-775mm, Depth-710mm, weight approximate 35 Kg.

RADHAKRISHNA INFRA (BID ID -3391743)

Rashmi Enterprises (BID ID -3391956)

M/s Shree Construction (BID ID -3392025)

RADHAKRISHNA INFRA (BID ID -3391743)