PRVN OF CAR PARKING SHED AT JCO/OR MD ACCN AND ALTN OF MAIN BLDG OF ECHS POLYCLINIC DUNDAHERA UNDER AGE B/R-II OF GE SOUTH DELHI CANTT-10

Amount

Excavating in post holes in soft loose soil (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description over 10 cm in width or grith, not otherwise described complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed.

Surface dressing not exceeding 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.

M&L for hardcore, broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in sub base complete all as specified and as directed.

M&L for 80 mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and prope embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops,rounded or chamfered on edges complete all as specifeid and as directed.

M&L for preparation of new concrete surfaces smooth by rubbing and/or sandpapering and applying 1mm thickness (average thickness) water proof cement base putty and there after applying two coats of cement base paint complete all as specified and as directed.

Taking down chowkats with shutters exceeding 1.50 sqm but not exc. 4.00 sqm each, complete all as specified and as directed.

M&L for rendering 15 mm thick with ready mix plaster on stone masonary surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for preparation of newly plastered surfaces of wall/ceiling sufraces and applying 1mm thick (average thickness) waterproof cement based putty and thereafter apply two coats of super quality weather proof exterior emulsion paint over a coat of primer using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface complete all as specified and as directed.

M&L for granite (of any type) work, 16 to 18mm thick (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like in over and including 15mm thick rendering in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rounding/moulding edges of granite stone with mechnical grinder and dismantling of existing stone slab of any thickness and in any position complete all as specified and as directed.

M&L brick work using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius in cement mortar 1:6 including demolition of existing brick work in any position/any type and in any shape complete all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. Including 5mm thick sheet glass Plain/frosted or 12mm thick prelaminated (one or bother side prelm) particle board complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread and watering, levelling/rolling by roller/compaction to prepare true surface for sand cushioning complete all as specified and as directed.

M&L for plain cement concrete type D2 1:4:8 (40mm graded aggregate finished as in foundation or sub base, complete all as specified and directed.

M&L for 15 mm thick Vitrified heavy duty parking tiles of any colour, any pattern any desing as approved by Engineer-in-Charge, area of each tile exc 0.04 Sqm but n.exc 0.36 Sqm as in floors/landing/steps/ riser/parking/footpath etc and over & including 15mm thick screed bed or bedding/rendering layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, including dismantling existing tiles of any description complete all as specified and as directed.

S&F for 11 to 15 mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10 cm long complete all as specified and as direcetd.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165 complete all as specified and as direcetd.

M&L for preparation of new or previously untreated plastered or concrete sufraces of any description over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of primer complete all as specified and as direcetd.

innovision limited (BID ID -3364051)

MOHIT ENTERPRISES (BID ID -3364608)

HANUMAN BUILDERS (BID ID -3362921)

M/S MSD & Associate (BID ID -3364823)

YP INFRA (BID ID -3364008)

Baljeet Builders & Interior Decorators (BID ID -3364671)

Ex Serviceman Enterprises (BID ID -3364845)