Maintenance work

Amount

Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of speicals such on large plate, shoe, carcher, coupling, bolt and nut transportation charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base as per the standard specification and as directed by the departmental officers.

For an 6 RM and initial height of 3M

Dismantling the damaged Mosaic in situ finish in cement mortar in flooring and in wall surface and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling the damaged Brick work in cement mortar under 3m height and clearing away carefully disposal of unserviceable materials to lead of 50m etc complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling , removing and carefully wall panelling & false ceiling roof etc;, complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling , removing and carefully stacking Doors &windowsincludung removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Brick partition walls of 11.50cm thickness using best quality II Class Ground Chamber Burnt Bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.

Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110mm dia pipe

75mm dia pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

110mm PVC Elbow

110mm PVC Tee

110mm PVC Y

CPVC (Chlorinated Poly Vinyl Chloride) Pipe of 32 mm dia (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11

32mm dia CPVC

Renewing and refixing following UPVC/CPVC special of approved aulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Elbow

coupling

Flooring with following Designed ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

supplying and fixing wall tile with following Designed ceramic tiles of size 600x300 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best quality Double charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (Sliding) from the profile the size of outer frame 88mm x 52mm sliding sash 50mmx 42mmx66mm, beading 24.5mmx16mm frame 74mm x 60x33.5mm,and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. and including the mosquito net sliding shutter. The corners and joints should be welded and cleaned.Stainless steel mesh.304 grade harware and 5mm thick saint gobian glass should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work sqm. 7482.00

Supplying and fixing of special type UPVC arch in Aluminium arch outer frame of size 68.5mmx35mm in 4mm thick, beeding of size 12mm and 1.5mm x 1mmm L angle 2.5mm thickness,screw PTA Zinck coated and 5mm saint Gobiant should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Supplying and fixing jaquar standard towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers

Supplying and fixing soap dish (T6003A1) of size 150mm x 150mm x 50mm approved quality and make including labour for fixing in position etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying andJaquar single flow shower with arm (T9902A1) of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing box type mirror of 5.5mm thick of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Size 900x600mm

Size 600x450mm

Supplying and fixing Health faucet with Two way bib cock tap with flexible hose 15mm dia jaquar of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing Jaquar three in one wall mixer tap of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing and fixing Jaquar Angle Cock of approved quality and approved make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed jaquar wash hand basin of size 840x470mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality and approved make Indian made white / colour glazed jaquar wash hand basin of size 450x450mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white glazed European water closet of jaquare of best approved quality and approval make with 100mm T or S trap connecting with PVC pipe of 110mm dia double slapped rigid PVC seat cover with CP brass hinges including cost of white cement for packing, spun yarn, TW plugs, brass screws etc., including supplying and fixing 10litres capacity PVC level flushing tank with a pair of CI brackets, etc. Complete with internal fittings such as 50mm Brass ball valve with polythene float, brass handle, union coupling connected by means of 40mm white PVC using Indian adopter joint including all internal fittings such as 50mm brass connection, 50mm Parryware angle cock, 50mm brass nipple 2nos, 50mm nylon connection TW plugs, screws and also connection to PVC pipe including cost of 110mm dia PVC pipe dismantling masonry and redoing the same to original condition etc., Complete complying with standard specification and as directed by the departmental officers.

Renewing and refixing the WPC door shutter including cost of furniture fitting such as 3 nos 4'' brass butt hinges, 2nos 6''brass tower bolts2nos 4''brass handle including labour for fixing etc., complete.

Painting the old walls two coat of interior Emulsion paint including two coat of putty cost of brushes, Labour charges scoffolding charges etc., complete complying with standard specification and as directed by the departmental officers at site of work.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Supplying and fixing single level false ceiling with12mm thick saint Gobiant False ceiling in truly horizontal level false ceiling grid using aluminium section of size 2'' x 1'' of aluminium section density of 1.9 kg per metric cube will be l;aid at equal intervals for 2'feet cross 2'feet. this section is held by 1'' inch cross 1 '' of aluminium along with a bullet screw in the ceiling. after this perimeter 1.5'' inch cross, 2''inch to be placed below the aluminium section.a joint compount will be applied to hide the joint then, the fiber raincoat tabe will be placed.including two coats of putty and one coat of whitw primer , two coats of paint etc., completed

Supplying and fixing double level false ceiling with12mm thick saint Gobiant False ceiling in the truly horizontal level false ceiling grid using aluminium section of size 2'' x 1'' of aluminium section density of 1.9 kg per metric cube will be laid at equal intervals for 2'feet x 2'feet. this section is held by 1'' inch cross 1 '' of aluminium along with a bullet screw in the ceiling. after this perimeter 1.5'' inch cross, 2''inch to be placed below the aluminium section.a joint compount will be applied to hide the joint then, the fiber raincoat tabe will be placed.including two coats of putty and one coat of whit primer , two coats of paint etc., complete complying with standard specification and as directed by the Departmental officers.

Supplying and fixing of back panel along with lacquer glass, using 100mm cross 18mm thick plywood with 250mm depth . The aluminium section of size 2' cross 1' including two spot lightsetc., complete complying with standard specification and as directed by the Departmental officers.

Supplying bottom box of 400mm width fabricated out of 18mm thick plywood finishing duly edges banded with 2mm thick PVC beading with drawer along gandles. providing hinges, lock & key arrangement a etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of wardrobe unit of size 2.40m x 2.74 m Height 450mm width and it made out of waterproof plywood with 1mm laminated sheet each and painting two coats with SEP for inner side it is divied in to six portion of which top side of size 0.40m x 0.62 m with open doors and right side divided in five portion of size 0.40m x 0.40m fixing two long portion with two doors. the glass in center portion.along with ss handle and also fixing smoothing type door providing echo hinges and locks and finishing neatly edges laminated etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of wooden partition with MS louvers along with bottom box a the ms louverd of size 1.95m x0.20m width of 7 nos and fixing of bottom box 1.00m x 0.78 m Height it made out of waterproof plywood with 1mm laminated sheet etc.,complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of wooden partition with MS louvers along with bottom box a the ms louverd of size 1.95m x0.20m width of 7 nos and fixing of bottom box 1.00m x 0.78 m Height it made out of waterproof plywood with 1mm laminated sheet etc.,complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of TV unit with paneling work glass doors, electrical provisions, and bottom box of size 2.40m x 0.40 m height The box is divied into four portion each size 0.60 x 0.40 m width 0.30m and . Fixing the glass in center portion.with ss handle and also smoothing type door providing echo hinges and locks and finishing neatly edges laminated etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of pelmet with 18 mm ply wood for using of window screens etc.,complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of dresser unit made of 18mm BWP plywood with double side 0.8mm mica on both side. And 5mm saint gobian mirror used in dresser unit an aluminkium profile of 35mm black matt is used to close the door for the dresser unit. fixing of mirror in right side portion of size 1.53 m x 0.86 m width and left side portion divied in three portion of size 0.308 m x 0.50m height etc.,complete complying with standard specification and as directed by the departmental officers.

GST at 18%

LASHMINARAYANANCONSTRUCTIONS (BID ID -1109410)