ADDITION ALTERATION OF SANITARY FITTINGS AND REPAIR OF BATHROOMS OF OFFRS MESS ARMY AD CENTRE AND SPECIAL REPAIRS REPLACEMENT OF CENTRIFUGAL PUMPSETS ALINGWITH CONNECTED ITEMS UNDER GE I GOS

Taking down cement plaster any description on brick or stone walls or RCC roofs/ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 3 mm thick wall care putty on walls incl rubbing and scrapping to make smooth surface for further treatment all as specified and directed.

M&L for Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M & L for applying two coats of oil bound distemper on old wall or concrete over a coat of primer on prepared surfaces including & rubbing with sand paper after Complete removal of existing treatment from walls all as specified and directed .

M&L for preparation of new plastered surfaces of walls or concrete and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 x 450 x 7 mm thick on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and incl 15 mm thick screed bed in cement mortor 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed.

Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 including all plain CPVC SDR 11 fittings as required for fixing on walls/ceiling or laid in floors, etc, complete all as specified and directed.

Supplying and laying of 25mm bore dia, CPVC pipes SDR 11 including all plain CPVC SDR 11 fittings as required for fixiing on walls/ceiling or laid in floors, etc, complete all as specified and directed.

S&F CPVC Brass elbow 20mm bore dia complete all as specified and directed

S&F CPVC Brass elbow 25mm bore dia complete all as specified and directed

S&F CPVC Brass Tee 20mm bore dia complete all as specified and directed.

S&F CPVC Brass Tee 25mm bore dia complete all as specified and directed.

S&F CPVC Brass MTA (male brass threaded adaptor) 20mm bore dia complete all as specified and directed.

S&F CPVC Brass MTA (male brass threaded adaptor) 25 mm bore dia complete all as specified and directed.

S&F CPVC Brass FTA (female brass threaded adaptor) 20mm bore dia complete all as specified and directed.

S&F CPVC Brass FTA (female brass threaded adaptor) 25 mm bore dia complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S&F in repair bib cock with wall flange florentine series wall mounted cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

S&F in repair 15 mm fancy type pillar cock with extension body florentine FLR-CHR-5021M, chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts screwed for iron/CPVC pipe and fixed complete as directed by Engineer-in-Charge.

S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube , complete all as specified and directed .

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S & F in repair vitreous china table top-beige matt, kubix prime, KUS-BEM-35931 PM, wash basin with faucet hol size 600x440x150 mm, incl brass waste coupling 32mm size, fixed on Granite/Marble or other appropriate top coloured including chromium plated waste coupling, PVC connection and waste pipe , complete all as specified and directed .

S & F in repairs, vitreous china Rimlesss wall mount water closet size 380X515X360mm with UF slim seat cover , CNS-WHT-963UFSM, white, incl Single piece Slim conlcealed Cistern body JCS-WHT-24005 with istallation kit & S-Type drain pipe connection set for wall hung WC ( without flush control plate) , complete all as specified and directed .

S & F in repairs Vitreous China urinals, standard type urinal with a horizontal outlet white, URS-WHT-132530, dimensions 375X320X620 mm incl Auto closing concealed urinal flush valve PRS-CHR-077 including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including PVC waste pipe etc complete all as sapecified and directed.

S/F in repair CP health faucet with 8mm dia, 1 meter long flexible tube & wall hook complete all as specified

S&F in repair brass shower rose 125 mm dia any type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F Iin repair CP Grating doom 75/110 mm dia incl jointing with solvent cement complete all as specified and directed.

S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall , complete all as specified and directed .

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 90 gms) , complete all as specified and directed .

S&F in repair 75/110 mm PVC (SWR) floor trap with grating including jointing with solvent cement. Complete all as specified and directed

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete

Taking down old unserviceable and Supply and Fixing Centrifugal pumpset ,electric driven,Three phase suitable for suction and delivery pipe line size 80 X 80 mm ,head 44 mtr,16 LPS of 15 HP (11 KW), complete fitting and testing ,alignment of motor complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Centrifugal pumpset ,electric driven,Three phase suitable for suction and delivery pipe line size 100 X 80 mm ,head 40 mtr,24.5 LPS of 20 HP (15 KW), complete fitting and testing ,alignment of motor complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Centrifugal pumpset ,electric driven,Three phase suitable for suction and delivery pipe line size 100 X 80 mm ,head 48 mtr,25 LPS of 25 HP (20 KW), complete fitting and testing ,alignment of motor complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Centrifugal pumpset ,electric driven,Three phase suitable for suction and delivery pipe line size 150 X 100 mm ,head 48 mtr,25 LPS of 30 HP (24 KW), complete fitting and testing ,alignment of motor complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Centrifugal pumpset ,electric driven,Three phase suitable for suction and delivery pipe line size of 7.5 HP (6 KW), complete fitting and testing ,alignment of motor complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing mooblock pumpset ,electric driven,Three phase suitable for suction and delivery pipe line of 2 HP , complete fitting and testing ,alignment of motor complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Submersible pump ,electric driven 415 volt 3 HP ,40 mtr head 105 LPM ,50 mm outlet including lowering by manpower and mechanical equipment complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Submersible pump ,electric driven 415 volt 5 HP ,75 mtr head 180 LPM ,50 mm outlet including lowering by manpower and mechanical equipment complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Open well Submersible pump ,electric driven 415 volt 3 HP ,40 mtr head 105 LPM ,50 mm outlet including lowering by manpower and mechanical equipment complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

Taking down old unserviceable and Supply and Fixing Open Well Submersible pump ,electric driven 415 volt 5 HP ,75 mtr head 180 LPM ,50 mm outlet including lowering by manpower and mechanical equipment complete all as secified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

M & L disconnecting and taking down old unserviceable chlorination system and Supply Install test and commisioning of Chemical Dosing System of capacity 25 ltr/hrs at 10 kg/cm2 pressure coupled with 3 phase or single phase of capacity 0.5 Hp 1440 RPM with agiator dosing motor and agiator operated by single phase motor against rod (pvc) sweep blade FRP tank of capacity 150 ltr with inlet outlet connection and drain point hole complete all as specified and as directed. Note :-The unserviceable pump set will be deposited to the AGE E M store yard.

S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 110 mm OD complete all as specified and directed.

All as Item No 63 but 90 mm Outer Dia complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

All as Item No 63 but 75 mm Outer Dia complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

All as Item No 63 but 63 mm Outer Dia complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

All as Item No 63 but 32 mm Outer Dia complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 32 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

Supply , laying, jointing & testing of 200 mm dia DI Type K-7 pipe with flange ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including gasket and fastners, laid in trenches complete all as specified and directed by Engr in charge. (Excavation and earth work, DI specials will be measured and paid seperately)

All as Item No 69 but 150 mm bore

S&F in replacement of sluice valve 200 mm bore class PN - 1.6 with flanged and iron wheel head ,shut and open directed cast on it and including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

All as Item No 71 but 150 mm dia

All as Item No 71 but 100 mm dia

All as Item No 71 but 80 mm dia

S&F foot valve 150 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed.

S&F foot valve 100 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed.

S&F foot valve 80 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed.

S&F in replacement of NON return valve 100 mm bore class PN - 1.6 with flanged including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

All as Item No-27 Above but 80 mm bore complete all as specified and directed. Make :VAG(Resiliant sealed) Zoloto/Kirloskar or equivalent

S&F Rotational polythylene water storage tank (Cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.

Taking down old unserviceable mild steelS & F Miled steel framed work such as angles,flat iron, grills,gratings,etc.with ends of bars shouldered and/or riveted or forged into spikes,framed guard bar,barred iron doors,ladder,framed balusters,ralling frame work etc including two coat of synthtic ename paint over a coat of red oxide in steel surface and similar work conforming to Fe-410-O or Fe-310-O complete all as specified and as directed by Engr-in-charge.

M& L for MS/CI/DI fittings up to 150mm bore such as collar, bends (any type radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces (all socketed or all flanged with an equal & other end tapering bellmouth or flanged plates, connecting pieces straight (both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces ( one end flanged & other end spigot or socket or tapering as bell mouth or flanged ) caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and incl taking down old fitting of any type and any size complete all as specified and directed.