Estt For Extention work to PMAWAS PVTG 13 no.Hamirpur 13 nos., PMAWAS PVTG 19 no.Village Agora 02 19 nos.,PMAWAS PVTG 34 no.Village Bidaniya 34 nos and PMAWAS PVTG 07 no.Village Imaliya 07 nos.ur Datia R DC OM Dn Datia

Task 1 - Task Name:- : D-2.1 Material , Material Supplied by MPMKVVCL

140 Kg.,8.0 Mtrs. long PCC pole

LT Aerial bunched XLPE Cable 3 X 25+ 1 X 16+ 1 X 25 sqmm with aluminium alloy Bare messenger wire

Task 1 - Task Name:- : D-2.1 Material , Material Supplied by Contractor

LT A.B Cable tension clamps (Galvanized)

LT A B cable Suspension clamps (Galvanized)

Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm)

Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

M.S.Nuts with Bolts

Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-

Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole

Task 2 - Task Name:- : E- 1.1 Material , Material Supplied by MPMKVVCL

140 Kg.,8.0 Mtrs. long PCC pole

11 KV(45KN) Composite Polymer Disc Insulators

11 KV Strain hardware (T&C type) fittings

11 KV D.O. Fuse Unit Polymer type

9 KV Gapless type ( 5KA) Polymer for DTR

Bi-metallic clamps Distribution Transformers Bushing

Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP)

XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts

Task 2 - Task Name:- : E- 1.1 Material , Material Supplied by Contractor

Stay set complete without Stay wire 16 mm. (Painted)

STAY WIRE 7/3.15 MM.(7/10 SWG)

Stay Insulators 90X65mm

Stone Block/Pre cast block for base pedding(450X450X75MM)

Concreting of structures & foundation (1:3:6)

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Complete jumpering of DTR

Danger Boards Enamelled 11 KV

Red oxide paint

Aluminium paint

M.S.Nuts with Bolts

Meter cum protection box for 25 KVA DTR

G.I. STRIP 25X3 MM1

G.I.Pipe 40 mm Dia C grade type

Bentonite compound powder

Galvanized nut & bolt with washer

Task 3 - Task Name:- : Service Connection Charge Material Supplied by MPMKVVCL

PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR

Single phase Electronic meter with data downloading facility & box 5-30 Amps.

Task 3 - Task Name:- : Service Connection Charge Material Supplied by Contractor

Rack Bolt/Screw

3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E

PVC Bush

LED Lamp with 9 Watt (Complete)

Switch Board

Wooden Board 10"x8"

Task 4 - Task Name:- : C- 1.4, Material Supplied by MPMKVVCL

140 Kg.,8.0 Mtrs. long PCC pole

11 KV Pin Insulator Polymer Composit (5 KN)

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

Task 4 - Task Name:- : C- 1.4 , Material Supplied by Contractor

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

Back filling of poles with boulders.

Red oxide paint

Danger Boards Enamelled 11 KV

Aluminium Binding wire and tape

M.S.Nuts with Bolts

Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor

Stone Block/Pre cast block for base pedding(450X450X75MM)

Aluminium paint

Fabricated Material , Material Supplied by MPMKVVCL

D.C. Cross arms 5 ft centre to center (100x50x6 mm) Channel

Transformer mountingChannel (100X50x6 mm.)

11 KV V cross arm 65X65X6 mm. angle type

11 KV Top clamp 65X65X6 mm. angle type

Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels

Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

D.O.Mounting Channel 75x40x6mm

Labour & Transportation Charge

18 % GST on Total Cost