REPAIR/MAINTENANCE AND OTHER MISC WORK IN OFFICERS

Amount

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L rendering 10mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete.

M&L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including prepration complete all as specified and directed.

M&L for 2mm thick Birla / JK Putty on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on new prepared plaster surface of including, rubbing with sand paper complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade etc.complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick square/rectangular) (joint free) area of each tile exc 0.6 sqm but n.exc 0.11 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed/digital coloured ceramic tiles 450 x 300 x 7/450x350x7mm thick as in vertical surfaces such as dado / skirting etc. over and including 10 mm thick plaster in cement mortar 1 : 4 as a backing coat for fixing of wall tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade etc. complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specified & directed. Make : Somany/Johnson/Kajaria/Orient bell

M&L for 10mm thick Light shade vitrified tiles as in skitting/dado exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 10 mm thick rendering in cement mortar 1:4 to for fixing the tiles complete all as specified & directed. Make : Somany/Johnson/Kajaria/Orient bell

Demolition stone slab and tiles of any description or thickness in floors, dado/skirting and apron etc laid bedded and pointed in any mortar complete all as spd and directed.

M&L for granite stone slab 20mm thick(table rubbed and polished) in cooking platform and like in cement mortar 1:4 including pointing in white cement(1:2) using marble dust making holes in RCC shelves suitable for gas pipe with round edges where required complete all as directed.

M&L 25 mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) , as in sub top layer of floor and finished rough to receive the floor tiles.

S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe) complete all as specified all as directed.

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed .

S&F flush pipe of polyethelene of low and or high density or PVC 32mm dia for low level cistern

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including mild steel brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

S&F vitreous pedestal china for WHB as per suitable for WHB size 550x400 mm complete.

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete.

S&F in repair bib tap 15 mm bore, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair cast copper alloy chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

S&F in repair cast copper alloy CP tubular towel rail 20 mm dia D type 60 cm long between flanges complete.

S&F in repair of stainless steel soap dish, of standard size and shape complete.

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) cascade type of size 380 X 700 X 665 mm coloured/white with cistern (with twin flush fittings) complete including seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified and directed (Make : Jaquar cat part no CNS WHT 851P180SPP) or equivalent Prayag Polymers Pvt Ltd.

S&F in repair vitreous cabinet china wash hand basin, flat back with cabinet one No pvc waste pipe 25mm dia and 75 cm long with 32 mm dia connector, 32 mm size waste fitting, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and pvc connection 15 mm dia & 600mm long with two Nos check nut washer complete including cutting for and pinning in ends of bracket or erecting stand completed all as apecifed and directed. Make: Jaguar or equivalent in Prayag Polymers Pvt Ltd.

S&F in repair 15mm bore Pillar cock for wash hand basin with left hand operating knob with 450 long Braided house and fixed complete all as specified and as directed. Make : Jaquar CON -127BKN or equivalent in Prayag Polymer Pvt Ltd

S&F in repair CP angle stop cock 15 mm with wall flange complete all as specified and directed. Make : Jaquar CQT-23059 or equivalent of make. Prayag Polymer Pvt Ltd.

S&F in Wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side connecting legs & wall flanges. complete all as specified and as directed. Make : Jaquar FUS - 29273UPR or equivalent in Prayag Polymer Pvt Ltd.

S&F in repair overhead shower 150mm x 150mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rack with lower hanger (stainless steel) with hook complete all as specified and as directed.Make : Jaquar CHR - 1581H or equivalent make Prayag Polymer Pvt Ltd.

S&F CP towel ring round with round flange & iron CP brass screw and wooden/plastic cleats complete all as specified and as directed. Make : Jaquar CAN-1121BN or equivalent make Prayag Polymer Pvt Ltd.

S&F glass shelf 600mm long including fixed with CP brass screw and wood cleats / rowel plug with wall complete all as specified and as directed. Make : Jaquar CAN-1171N or equivalent make Prayag Polymer Pvt Ltd.

S & F corner glass shelf 300mm (with brass brackets) including fixing arrangements complease all as specified and directed. Make : Prayag (Cat N BEA-44) or equivalent Jaguar

S&F in repair 15mm bore Stop valves, fancy type cast copper alloy chromium plated,screwed down,high pressure,with crutch or butterfly handle,cast or forged variety opening full way,screwed both ends for iron pipe or for unions and fixed

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pie with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F toilet paper holder with flap recessed type stainless steel complete all as specified and as directed.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F 100 mm dia grating doom of stainless steel complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutter from the frame) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.

S&F Plain, 1st class hardwood solid, straight chowkats and frames, wrought, framed rebatedon the solid, rounded or chamfered,put together with glue pinned atjoints,complete all as specified and directed.

S & F Plain, framed, 30 mm thick panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats 1st class hardwood rail and style complete all as specified and directed.

S&F for PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Butt hinges extruded aluminium anodised alloy with galvanised hinge pin size 100mm complete all as specified and directed

S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and all complete all as specified and directed.

S&F 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F150 mm extruded section aluminium alloy handles, cast type anodised complete all as specified and directed

S & F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long complete all as specified and directed.

S & F floor door stopper of aluminium alloy body with cover plate 140mm long and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as directed

S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair 40 mm dia cup board knobs, fixed with nut, screw and washer of mild steel bright finish complete all as specified and directed.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

M & L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 & not exc 25 Sq cm complete all as specified and directed

S&F in repair 2 lever brass cupboard lock grade-I size 65 mm etc complete all as specified and directed. Make - Link/Godre.

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F in repair stainless steel designer curtain rod fancy type curten rod 20 mm dia as approved complete..

S&F stainless steel Brackets with knobs fancy type for stainless steel designer curtain rod 20 mm dia as approved complete all as specified and directed.

S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joining cleat including locking arrangement. etc

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 92 x 31.75 x2 mm thick weight @ 1.490Kg/RM (b) Style/Vertical member of size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (c) Top and bottom rail of size size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joining cleat including locking arrangement. etc

S&F anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium flat of size 4x5mm as approved by Engr-in-Charge/GE for window/ ventilators etc complete all as specified & directed.

S&F aluminium partition wall with following specificaiton complete all as specified and directed by Engr-in-Charge : (a) Vertical member of size 63.50 x 38.10 x 1.85 [email protected] Kg/RM (b) Horizontal, top,middle and bottom member of size 63.50x38.10x1.95 mm @ 1.092 Kg/RM (c) Partialy 9mm thick prelaminated particle board both side decorative (d) Partialy 5.5mm thick tinted glass. (e) Aluminium and PVC beading as per requirement as in fixing for particle board and glass.

Taking up or down steel tubing and connections 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, of 20 mm dia complete all as specified and directed.

Supply & laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings and wall / ceiling or laying in floors complete all as specified

Supply & laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings and wall / ceiling or laying in floors complete all as specified

HARINANDAN RAI SONS (BID ID -3107494)

Jai Ambay Construction (BID ID -3114357)

M/S NANDA CONSTRUCTION (BID ID -3114254)

M/s KUMAR ENTERPRISES (BID ID -3115055)