Improvement of road from Hyundai Service Center up to Timber workshop through Akhsya Jena house at Patia in Ward No. 03

Earth work excavation in Hard soil using one cum Bucket Hydraulic Excavator with all leads and lifts and transpotation of ecavated matiral by mechcanical means. and direction of Engg -in- charge

Labour for laying sub-base in layers not exceeding 100 mm. watering and compacting to required density in OMC with P.R.R. but excluding costs conveyance of sub-base materials.

Providing laying, spreading and compacting graded stone aggregate to "WET MIX MACADAM" specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achive the desired density as per Clause 406 of MoSRT&H specification for road and bridge works

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete.

Fly Ash Brick masonry in C.M. (1:4) in founadtion & plinth having crushing strength not less than 75 Kg / cm2 with dimensional tolerance ± 2%.

12mm thick C:P (1:4) over brick work etc complete

CC M-25 with 20mm size downgraded CBHG chips including all cost, conveyance, royalty and taxes etc. complete of all materials to work site as per the specificatiosn approved by the department and the directions of the Engineer-in-Charge

Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod.

Rigid smooth centering and shuttering for RCC or CC work(F&P) including false works, supplying of centering materials, its hire charges, cost of labour T & P and dismentalling after casting the concrete etc all complete as per direction of EIC

Display Board & Photographs