REPAIR AND MAINT OF STREET LIGHTS OF CENTRAL AREA AT JAISALMER MIL STN

Amount

Taking down defective/unservicable street light/ flood light/ solar light/post top lantern fitting of any size /type/capacity any Watt from height of pole/walls/for repair work and fixing back after repair work including checking, inspecting, testing and commissioning ccomplete all as specified & directed by Engineer-in-charge. Note :- (a) Spares like LED Driver,surge protector ,service wire etc. shall be measured and paid as separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder & other T&P required etc shall be arranged by the contractor without any extra cost. (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts, cirle clips , clamps etc required if any at site.

Supply only of electronic driver for LED light fitting, LED out put power 30 watt, input voltage range : 170 - 300 volt AC , out put voltage DC as per make/ model range: 24 volt to 110 volt, make as per site requirement complete all as specified & directed by Engineer-in-charge.

All as per item No 2 above but capacity 45 watt

All as per item No2 above but capacity 60 watt

All as per item No 2 above but capacity 70 watt

All as per item No 2 above but capacity 90 watt

All as per item No 2 above capacity 200 watt

All as per item No 2 above capacity 250 watt

All as per item No 2 above capacity 400 watt

Supply only Surge Protector 10KV for street light fitting, Normal voltage input range : 170- 300 volt complete all as specified & directed by Engineer-in-charge.

Labour only for making serviceable street/security lights/solar light unserviceable placed at pole by disconnection / Isolating power supply either from pole junction box or by disconnecting overhead jumpers and carrying out de-carbonization / de-sulphation at connection points with overhead conductor / light fitting / junction box terminal including replacement connection wire complete all as specified & directed by Engineer-in-charge. Note : - Cable shall be measured and paid seprately.

Supply and fixing in repair Led Street Light Of Capacity 45Watt, aerodynamically designed for all weather condation with excellent thermal management Having Pressure Die Cast Aluminium Housing,with toughend glassand high power LEDs with secondary optics and IP66 protection.10 kv SPD included , Efficiency Of ≥ 110 Lumens/Watt , The Fitting Must Be Suitable For 30 To 50 Mm O.D Mounting Pipe And Suitable For Mounting On Wall / Pole With Necessary Mounting Arrangements ), Mounting Pipe/Bracket , Nut, Bolts And Accessories Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. complete all as specified & directed by Engineer-in-charge. Cat No Raptor Pro:- Crompton cat No CRP-409-45-57-SL-GL-NSG or equivalent in appx "C" list of makes.

Supply And Fixing in repair Led Street Light Of Capacity 60Watt, aerodynamically designed for all weather condation with excellent thermal management Having Pressure Die Cast Aluminium Housing,with toughend glassand high power LEDs with secondary optics and IP66 protection.10 kv SPD included , Efficiency Of ≥ 110 Lumens/Watt , The Fitting Must Be Suitable For 30 To 50 Mm O.D Mounting Pipe And Suitable For Mounting On Wall / Pole With Necessary Mounting Arrangements ), Mounting Pipe/Bracket , Nut, Bolts And Accessories Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. complete all as specified & directed by Engineer-in-charge. Cat No Raptor Pro:- Crompton cat No CRP-409-60-57-SL-GL-NSG or equivalent in appx "C" list of makes.

Supply & Fixing Led Flood Light Fitting 250 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 30,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95,Cct – 5700k, Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver.Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X 1.5 Sqmm Frlsh Wire, All As Per Directed By Eiccomplete all as specified & directed by Engineer-in-charge. Make Crompton Cat no CFS-506-250-57-60 D-SL-GL-NSG or equivalent in appx "C" list of makes.

Supply & Fixing Led Flood Light Fitting 200 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 30,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95,Cct – 5700k, Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Separate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver.Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X 1.5 Sqmm Frlsh Wire, All As Per Directed By Eic complete all as specified & directed by Engineer-in-charge. Make – Crompton Cat no TFS-507-200--57-60 D-SL-GL-NSG or equivalent in appx "C" list of makes.

Supply & Fixing Led Flood Light Fitting 400 Watt Elegently Designed, Pressure Die Cast Aluminium Housing In Powder Coated Finish Ip-66, Lumen Efficacy >= 120lm/W And Total Lumens Output Must Be = 48,000 Lumens Or More, Operating Voltage Range 120 – 270, P.F > 0.95, , Cct – 5700k, Of Surge Protector Of 10 Kv Inside Fitting, Driver Of The Fitting Shall Be Potted Type Only For Vibration Proof Performance With Inbuilt Surge Protector, Over Voltage Protection. Both Fixture And Drivre Must Have Seperate Bis Marked Registration With Clearly Mentioned On Fixture & As Well As On Driver.Including Disconnected & Taking Down Old Unserviceable Light Complete. The Manufacturer Of The Led Fitting Shall Have Inhouse Nabl Accrediated Lab & Contractor Shall Furnish Same Along With Lm-79,Lm-80, Test Report Etc. Including Making Connection With 3 Core X 1.5 Sqmm Frlsh Wire, complete all as specified & directed by Engineer-in-charge. Make – Crompton Cat no. CFS-512-400-57-60 D-SL-GL-NSG or equivalent in appx "C" list of makes.

Supply and fixing in replacement of PVC insulated, sheathed weather proof, copper conductor of size 1.5 sqmm, 3 core complete all as specified & directed by Engineer-in-charge.

Supply and fixing in replacement of PVC insulated, sheathed weather proof, aluminium conductor of size 6 sqmm, 2 core complete all as specified & directed by Engineer-in-charge.

M&L in replacement of PVC conduit 20 mm, heavy duty rigid non metallic including of all tee, bends, elbows etc complete all as specified & directed by Engineer-in-charge.

S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) and including one coat of red oxide primer and two coat of aluminium paint over a pole including dismantlaing/taking out existing PCC/Steel tubular pole and making surface good complete all as specified & directed by Engineer-in-charge.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation for PCC poles/struts including necessary form work complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of PCC pole /stay assembly including necessary form work up to groud level complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/coping/plinth of poles, including necessary form work finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

Taking out UG LT cable of any size/any core complete all as specified & directed by Engineer-in-charge.

Supply, laying, test and commissioning in repair of LT UG ,XLPE insulated, heavy duty, 1100V grade of electric cable size 50 Sqmm 3.5 core with aluminium conductor, served with an inner sheathing of PVC tape armoured eith galvanized steel wire or tape and overall PVC sheathed,laid in trench or passing through pipe, making all connection with and including provision of necessary glands, lugs, bushing etc as required complete all as specified and directed by Engineer-in -Charge of following size:- Note: Earthwork excavation sand cushioning, Jodhpur stone patti, GI protcetion pipe shall be measured and paid separately in their respective items.

All as per item No 25 above but size 35 Sqmm 3.5 core

All as per item No 25 above but size 25 Sqmm 4core

All as per item No 25 above but size 16 Sqmm 4core

All as per item No 25 above but size 10 Sqmm 4core

All as per item No 25 above but size 10 Sqmm 2core

Relaying of old retrieved servicable LT UG cable of any size /any core complete all as specified & directed by Engineer-in-charge.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

M & L in repair HDPE DWC pipe ISI marked fixed on walls, ceiing , in floor,trenches etc for laying of cable protection of the following outer dia :-

40 mm dia

50 mm dia

63 mm dia

S&F steel water tubing 40 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in trench on pole for protection of cable etc and including taking down existing pipe of any description complete all as specified & directed by Engineer-in-charge.

S&F steel water tubing 50 mm bore, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in trench on pole for protection of cable etc and including taking down existing pipe of any description complete all as specified & directed by Engineer-in-charge.

Supply and Fixing of pole mounted junction box of outer size 300x200x120mm made out of FRP body (hot mulded type) with IP-66 protection and locking with screws alongwith 6 Amp rating MCB SP-01 No, up to 50 Amp rated 4 pole connector suitable to insert the cable size up to 25 sqmm x 4 core -02 No and din rail suitable for mounting the MCB/Connector etc complete in side box and duly fixed with 25x3mm FI clamps with nut bolts of suitable size on steel tubular pole/PCC/RCC pole including cable glands, aluminum lugs/thimbles for incoming and out going cables and including taking down old existing unserviceable junction box complete all as specified and directed by the Engineer-in-Charge.

S&F galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings and including taking down existing bracket of any description complete all as specified and directed by Engineer-in-charge.

S&F miniature circuit breaker (MCB) of single pole SP 6-32 AMP 240V, 10KA 'B' curve in the MCB DB complete with connection testing and commissioning including dismantling existing MCB complete all as specified and directed by Engineer-in-charge.

S&F miniature circuit breaker (MCB) of single pole and neutral SPN 32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning including dismantling existing MCB complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB, TPN 40 to 100 Amp, 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity in the DB complete with connection testing and commissioning including dismantling existing MCB complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB, TPN 63 Amp, 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity in the DB complete with connection testing and commissioning including dismantling existing MCB complete all as specified and directed by Engineer-in-charge.

Supply & fix MCCB 415V, 3 phase 50 HZ 4 pole 100 Amps breaking capacity 16 KA (Ics = 100% Icu) with including dismantling old one connection link on LT panel /fedder piller complete all as specified and directed by Engineer-in-charge.

Supply & Fix MCCB 415V, 3 phase 50 HZ 4 pole 125 Amps breaking capacity 16 KA (Ics = 100% Icu). with including traking down/dismantling old one connection link on LT panel /fedder piller complete all as specified and directed by Engineer-in-charge.

Material and labour for straight through(Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 10/50 SQmm including dismantling the old burnt cable joint termination complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of old painted surface of LT Concrete electric pole of any size by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior , synthetic enamel paint over a coat of primer of approved colour of black and Yellow strip 30 cm height 1.5 mtr above the ground level, including painting the cross arms/bracing support on poles with a coat of aluminium paint, silver colour aluminium paint with coating of primer and writing of identification Nos with proper stencil cut etc complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior , synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut complete all as specified and directed by Engineer-in-charge.

Supply and fix Din type HRC fuse link of Required rating 32A/63A/100A Suitable for HG type 20H/2 and including taking out existing fuse of any description complete all as specified & directed by Engineer-in-charge.

S&F Street light nature switch (using infrared sensor technology) based automatic street light control panel. the panel shuld be suitable enough to take 3 Phase load of 18 KW. Nature switch operation should be based on natural light Lux* level. required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs. The sensor alongwith suitable 3 Nos power Contractors and 03 Nos incoming MCB's 40 Amp & 3 Nos outgoing MCB's of 32 Amp each & circuit wiring (Copper) of min 10 sqmm with lug should be enclosed in a pole/wall mountable rust proof, electric shock proff, termite proof and FR grade SMC elclosure confirming to IP 66. The circuit should also have provision for Manual operation (i.e. Sensor by Pass option) including taking down existing nature switch of any description complete all as specified and directed by the Engineer-in-charge.

S&F Nature switch (using infrared sensor technology) based automatic street light control panel. The panel should be enough to take three phase load of 25 kw.Nature switch operation should be based on natural light luxes. required illuminance level switching ON is <=60 and for Switching OFF >=10 lux. the senser should be have a part night operation facility of min 4HRS to max 12 hrs . the senser along with suitable 3 phase load of 25 KW with 3 nos contractor ,3 nos Incoming MCBs of 63 Amps and outgoing MCBs of 63 Amp and circuit wire copper of min 16 Sqmm and should be enclosed in a pole /wall mountig Rust proof ,Electric shock proof ,Termite proof and FR grade thermoplastic polycarbonate enclouser (with hinged lid) conforming to IP66 protection.The circuit should also have provision gor Manual or Auto operation including taking down existing nature switch of any description complete all as specified and directed by the Engineer-in-charge.

Supply & fix MNX Power contactor suitable for power supply 40 Amps 4 pole 4 NO Contactor including making electrical connection to the contactor and including taking out existing power contactor complete all as specified & directed by Engineer-in-charge.

Supply & fix MNX Power contactor suitable for power supply 63 Amps 4 NO Contactor including making electrical connection to the contactor and including taking out existing power contactor complete all as specified & directed by Engineer-in-charge.

S&F Digital Astronomical timer switch 240V AC-2W,C/O, Base/DIN type complete for switching of contactors and including taking out existing timer switch complete all as specified & directed by Engineer-in-charge.

M&L for Cutting the road / hard standings and excavating in trenches not exceding 0.40 mtr wide and not exc 0.80 mtr deep across the road for laying cable including making good the excavated portion by means of PCC 1:2:4, type B1 using 20mm graded stone aggregate complete and matching with the surroundings complete all as specified & directed by Engineer-in-charge.

S& F in repair Lithium based energy efficient Integrated solar street light of 20 watt in single body with FRP/Aluiminum duly polyurenthane coating encases with monocrystalline solar PV panel of 30/35Wp, Lithium battery 11.1/12.8 Volt, 24 Ah with inbuit BMS, IP 65/66, High brightness W-LED (120-180 Im/Watt) lamp with aluminium reflector for better lighting distribution, CRI 70, colour temperature 5700 K-6500 K, Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor,Dusk to dawn operation weight not more than 10-12 KG with adjustable MS Clamp suitable for existing pole/wall mounting etc including taking down old existing solar street light complete all as specified and directed by the Engineer-in-charge. Note : Short Circuit, overload, reverse polarity and battery protections to be provided. OEM should provide vital parameters test report from NABL accredited lab and should be of made in India with CE & TOHS complaint.

Taking down and dismantling existing high mast pole of height 12 to 20 mtr from bottom plate ,nuts bolts, gear box and head frame for dismantling the unserviceable parts including repair control panel wiring, old unsv lights, complete with the help of suitable T & P required for holding ,lifgting the pole,replacement of unservicable part,oiling and greasing,of pulleys,gear box,rope and all moving parts including assembling,installation of high mast pole complete as directed by Engineer-in charge. (Note 1. cost of crane for dismantling high mast pole is deemed to be included in quoted rate. 2. Cost of oling and greasing of moving parts is deemed to be quoted rate.

Taking down by disconnected the existing electrical connection of winch motor for rewinding /repairs including rewinding the mortor of capacity up to 2 HP with best class supper enameled copper wire of existing guage and size including varnishes and insulating 230 V AC 50 HZ electric supply system . refixing and reconnected it to the original location for satisfactory functioning of wintch on 230 v electric supply system complete all as specified and directed by the Engineer-in-charge.

Supply and fix in repair of of PIR Motion Sensor 170uA for 12 to 40 watt Solar Light Standard Detection 5m Lens Color : White complete all as specified and directed by the Engineer-in-charge.

Supply & Installation in repair of Lithium Battery 11.1V/ 12-20 Ah (Suitable for 12watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 12watt Integrated Solar Lights complete all as specified and directed by the Engineer-in-charge.

Supply & Installation in repair of Lithium Battery 11.1V/ 36 Ah (Suitable for 16watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 16 watt Integrated Solar Lights complete all as specified and directed by the Engineer-in-charge.

Supply & Installation in repair of Lithium Battery 11.1V/ 42 Ah (Suitable for 20watt solar light) with BMS Circuit and other necessary wires and connectors suitable for 16 watt Integrated Solar Lights ccomplete all as specified and directed by the Engineer-in-charge.

Supply & fixing in reapir of Rocker Switch 6 to 10Amp for solar lights complete all as specified and directed by the Engineer-in-charge.

Material and labour for fixing in repair radium reflective, water proof adhesive sticker of width not less than 50 mm wrapped around the street light pole of approved colour complete all as specified and directed by the Engineer-in-charge.

S & F battery 12 V, 40 AH with controller suitable for solar lighting system and taking down old unsv battery complete all as specified and directed by the Engineer-in-charge.

S & F of 1.1 KV LT cable route indicator /marker of MS plate 15 CM dia and 10 mm thick and 60 cm long, 45 cm ground in PCC and 15 cm above the ground level of MS angle of 50x 50x6 mm with the logo at the centre" LT CABLE GE (A) JSLR " complete with PCC as required qty complete all as specified and directed by the Engineer-in-charge.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete including dismantling existing rusted/ unserviceable cross arms complete all as specified and directed by the Engineer-in-charge.

S & F integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts, 0.6 Mtr height LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base electrical connections with adequate size one complete all as specified and directed by Engineer -in-charge. Make:- LBLA-1-10-WW of Crompton or equivalent in appx "C" list of makes.

S & F integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts, 0.6 Mtr height LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base electrical connections with adequate size one complete all as specified and directed by Engineer -in-charge. Make:- LBLA1-10-CDL of Crompton or equivalent in appx "C" list of makes.

Note : (a) Contractor has to arrange his own vehicles along with mounted hydraulic ladder/articulated & telescopic boom lift arrangement for attending the complaint throughout jaisalmer cantt area. (b) Contractor shall depute minimum 2 staff daily to attend and rectify the complaint. if not, Contractor shall have to bear a penalty of Rs 50.00 per complaint or maximum of Rs 500 per day on this account (c) Complaints has to attend and rectify the complaint/defect irrespective of no of trips/Complaints as alloted by Eng-in-Charge.(d) Complaint should be attend in Night also (e) Contractor has to arrange telescopic boom lift for maintenance at height of 15m at his own cost. No extra payment will be paid by department.

SHREE BHAGWATI ENTERPRISES (BID ID -3416425)

M/s Yash Electrical and Maintenance (BID ID -3415776)

M/s Rohit Construction Co. (BID ID -3416247)

SHREE I MATA ENTERPRISES (BID ID -3422508)

M/s J B Construction Company (BID ID -3415423)