SPL REPAIR/REPLACEMENT OF STREET LIGHT AND ALLIED INFRA AT FD WKSP AREA UNDER GE (SOUTH) JAIPUR AT MIL STN JAIPUR

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5 m but not exceeding 3.0 m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan in soft/loose soil etc complete all as specified and directed

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

Removal of excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

M&L for tibba sand filling under floor or in foundations including gently punned as in cushioning to cable complete all as specified and directed. Note:- Punned thickness of sand shall be measured and paid.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for brick protection cover to the under ground cable (with old size sub class 'B' bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm all as specified and directed.

S&F in repair steel tubular swaged pole 410 SP 31 (9 meters long) complete with cast iron base plate, finial, taper plug, nuts, bolts and washers all as specified including painting of poles with one coat of red oxide primer and two coat of aluminium paint before fixing and one coat of aluminium paint after fixing complete embedded portion will be painted with two coat of black bituminous paint complete all as specified and directed. Note : Excavation, earthwork & PCC in foundation and coping shall be measured and paid seperately.

S&F in repair LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with motion sensor based driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and directed. Note :- (i) T&P (Tools and Plant) required such as ladder, crane vehicle, manpower etc. shall be inclusive with qouted rate. (ii) The rate of necessary arrangement for fixing LED light on existing bracket like reducer or extention of pipe of suitable size as per dia of GI pipe LED light by welding etc. are inclusive in the rate.