15th Finance Commission Grant 2022-2023 Tied Grant Tender Notice.

Amount

Earth work excavating and depositing on bank with initial lead of 10 metre and initial lift of 2 metre in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

R.R. Masonry in Cm 1:5 mix using rough stone Bond stone including cost & conveyance and all labour charges etc., complete

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering in C.M. 1 : 5 (one cement, five sand) to 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Plastering with cement mortar 1:3 mix to 10mm thickthoroughly with water - proof compound 1.00 kg / 1 bag cement inculiding curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortal 1:5 mix using 20 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Supplying and fixing of M.S.Grill of approved design using necessary mild steel flats for inner and outer members which should be fixed to Gate frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI Pipes and Specials for pipe connection works including cutting, threading and fixing charges etc, Complete Supply of 2000 Lit. capacity HDPE tank

Supply of 1000 Lit. capacity HDPE tank

Supply of PVC and GI PIPE 6 Kg/cm2 including all cost and conveyance. 90mm dia PVC Pipe

63mm dia PVC Pipe

50mm dia PVC Pipe

50 mm dia GI Pipe

50Gate Valves

40 Gate Valves

Conveying of PVC right pipe to trench with in a lead of 200m lowering in to a trench carefully laying to proper grad and alignment jointing with PVC couplers with cement paste and testing to the requited pressure including conveyance of water upto 1.00km 90mm dia PVC Pipe

63mm dia PVC Pipe

50 mm dia PVC Pipe

Lowering GI pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD officers 50mm GI pipes

Refilling with excavated earth other than sand complying with standard specification.

Supplying and fixing of MS sheet steel window consists of frame and shutters the frame will be of 40mmx40mmx6mm MS angle alround the indermediate of frame will be of T section using 40mmx6mm and 25mmx6mm M.S. flats the shutters will be of 18 gauge of MS sheet with L angle of size 25mmx25mmx4mm alround in each leaf and cross bracing of MS flats 25mmx6mm including cost of tower bolt of 10mm dia MS bars with necessary hook and arrangement including cost of materials clamps for fixing of window in the wall cutting bending welding and fixing charges etc., complete

Supplying and fixing RCC Pre cast slab in RCC 1:2:4 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications., 100mm thick slab

Supplyind and fixing in position CI Manhole covers (light or heavy duty) of size 0.60 x 0.60M with suitable reinforcement and 50x50x6mm MS angle fixed along edges best approved quality and as directed by TWAD Board officersClause 406.

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Sri Sakthimurugan Construction