Providing 10 Person Passenger Lift in the Circuit House Building at Kallakurichi in Kallakurichi District.

Amount

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 10 Persons capacity Passenger Lift with Machine room as per the following specifications including all taxes and duties. 1.Location: Cirtuit House. 2.No of Lift: 1 No. 3.Type of lift: Passenger Lift. 4.Capacity of lift: 10 persons capacity passenger lift (680 Kgs). 5.Speed: 1 Metre / Sec. 6.Type of drive: Specific Variable voltage variable frequency V3F drive with enhanced ride comfort and levelling functions. 7.No of floors: GF + 1st Floor. 8.Total travel: 3.3 metres (Approximate). 9.Levelling accuracy: High level accuracy with smooth and jerk free stopping. 10. Construction of Car: High quality stainless steel car, Neat hair line finish with mirror and handrails. 11. Position of machine: Directly above the lift well. 12. No of landing entrance: 2 Nos. 13. No. of car entrance: one in front only. 14. Car entrance door: power operated V3F drive centre opening sliding Stainless steel scratch proof door with hair line finish. 15. Landing entrance door: power operated V3F drive centre, opening sliding Stainless steel door with hair line finish with provision for emergency key opening at all landings.

31. Sill angles and facia plates: Included in the scope. 32. Steel for lift machinery: Included in the scope. 33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 34. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room with telecom exchange unit with one trunk and three extension link proton 103, matrix telecom unit and required length of single twisted pair with thickness of 0.5 mm to 1 mm connecting the handsets and telecom exchange unit. 36.Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by the lift contractor. 37. Floor announciator with music. 38.Special features a) Infra red door sensor with full height screen b) Full width half height rear panel mirror c)Tubular Stainless steel hand rail in cars d) Voltage stabilizer for circuit control

e) Stainless steel signal features f) Vandal proof S.S. button with S.S. cover g) SS door frames for landing doors h) VF door operator i) Call Register signal j) Stainless steel facia plate for car operating panel and landing fixtures k) Steel ladder for lift machine room l) On - Off switch for fan and light m) Over load warning indicator with audio announcement. All the features as per differently abled persons act should be provided. 2 Hrs. fire retardent landing doors. 39.Provision of architraves covering all three sides upto a width of 300 decolum sheet on plywood with TW frame with aluminium beading architraves should also cover the thickness of still level door frame at the landing and indicator boxes at all landings. 40. Other standard features: Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electro magnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joint joist for mounting the machineries. 41. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year.

42. Site testing in accordance with IS 14665 should be carried out at the time of handing over. 43. Supply of operation and maintenance manual with necessary tools for operation.

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming 2 Nos 32 A TP MCB and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

C.V.T ENTERPRISES (BID ID -1167852)

R.V. & Co. (BID ID -1170258)