WBPWD/EE-I/CKHED/eNIT09/25-26

Amount

Testing, checking & detecting the fault portion of existing fault/ burntout 3.5C x 240sqmm Al/Ar cable by necessary tolls & tackles incl. megger. NS

Withdrawing the existing fault cable (3Cx240sqmm) to detect the fault portion. NS

Supplying and fixing 415V, 315A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (L&T/HaveIIs/Standard) D-3 /4(a)

Supplying of 1.1kV grade 3.5 Cx 240 Sqmm XLPE AI Armoured Cable' (Make'- Gloster/Havells/PoIyCab)

Laying On angle Iron frame “L" type 6"x18", 25mm x 6mm thick fixed by 10mm x 100mm fastener (On hospitai building surface only) NS

Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed (Hospital building to hospital wall) F-2/1(c)

Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3.5 and 4 core (only for road crossing) F-1/3(b)

Laying of cable Above 150 sqmm, on existing Cable Tray and binding with suitable size GI wire/MS Clamp. (from sub-station to Road) F-3/6(iii)

S & F angle iron frame "L" type 6"x18" 6mm thick fixed by 10mmx100mm fastener. NS

S & Laying 185 sqmm Single core stranded cu wire through suitable size flex wire.(from main switch bus bar) NS

S & F 100 mm HDPE pipe for protection cable laying on road. (from UG trench to hospital build wall)

Straigh through Jointing of 3.5 / 4 core 240 sqmm cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC) F-6/10(xi)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : F-4/7(d)+F-4/7c

3.5C x 240sq mm

4C x l20sq mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : F-5/8(b)

3.5C x 240sqmm

4C x l20sq mm

Finishing the ends of Single core 185sqmm cu wire by socketting and insulated tapes etc., includ supplying sockets, tapes. NS

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

M/s Singh Electrical Works (BID ID -6555924)

GHANASHYAM ELECTRIC STORES (BID ID -6580349)