Part A Dismantling of old 50,000 Gallon OHT at Tulsi Bagh with other old Structures and construction of walling of the premises and washroom under construction of 70,000 Gallon OHT at Tulsibagh. Part B Laying and fitting of pipes at Tulsi Bagh under

Amount

(Part A) Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and locksystem with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. NOTE:-To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done

Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirementincluding fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providingScaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars & disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Extra for cutting reinforcement bars manually/mechanical means in RCC or RB work as per direction of Engineer in charge. Extra for scrapping, cleaning and straightening reinforcement from RCC or RB work. (The actual qauntity of steel will be calculated as per the actual quantity recovered from demolishing RCC work at site. the contractor will keep all the scrap and the value o fthe steel bars will be deducted from the total cost of the bill of the contractor.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : From brick work in cement mortar

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement morta

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area below 40 sqcm.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm

Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge:

Dismantling GI pipes (external work) including excavation & refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : Above 40 mm nominal bore

Dismantling of CI sluice valve including stacking of useful materials within a lead of 50meters.Upto 150 mm diameter.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

EXTERIOR FINISHING. Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting on OHT of PHE Jalshakti with water proof cement paint along with salient features of the OHT. The hight of logo should be 2mtrs and the salient features should be written in 3x3 sqm. Complete.

Earthwork in excavation by manual means in trenches for foundations,drains,pipes,cables etc. (not exceeding 1.5m in width) & for shafts, wells, cesspits & the like not exceeding 10sqm on plan, including dressing of sides & ramming of bottoms lift upto 1.5m, including getting out excavated earth & disposal of surplus excavated earth as directed: All kinds of soil :

Providing and laying of Stone soling hand packed in level.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone agg. 40mm nominal size)

Providing & laying in position cement concrete of specified grade including curing but excluding the cost of centring & shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases & spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing & reinforcement with. 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls under 20cm wide.

Centering and shuttering including strutting, propping etc. & removal of form for: Spiral staircases (including landings)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre laminated conforming to IS: 12823, Grade-I, Type-II marked.

Providing & fixing glazed shutters for doors,windows & clerestory windows using 4mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood (35mm thick)

Providing & fixing wire gauze shutters using galvanized MS wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors,windows & clerestory windows with ISI marked MS pressed butt hinges bright finished of required size with necessary screws as per direction of Eng.-incharge: 2nd class Kail wood.(35mm thick)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) inside OHT Tank.

Providing & mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand).

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry & curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.

Supplying, filling, spreading & leveling Boulders /gravels /Sand , in rooms in the required thickness for all leads & lifts all complete as per direction of Engineerin charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Size of tile 600x600 mm. Complete job.

Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab OVER 0.5 sqm)(18 mm).

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings & fixtures complete, including cutting & making good the walls & floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. Complete Job.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing /fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, Kitchen sink without drain board 470x420mm bowl depth 178mm.

Providing and fixing of 50Ltr Geyser of Standard Quality like Venus, Jaguar or similar. The item also includes providing & fixing of geyser bolts as per site requirement & as per the instructions of Engineer in charge

Providing & fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32mm dia Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing & fixing soil, waste, vent pipes including all types of Pipe Specials traps etc made of B Class PVC material. Complete Job :(The measurement will be taken as total length of pipe including pipe specials,bends traps etc Complete)

150mm Dia Pipe

100mm Dia

80mm Dia

50/40mm dia

Providing & Fixing unplaticized PVC connection pipe with brass unions 45cms Lt.of 15mm nominal bore.

Providing / Fixing of Corner Shelf Set made from Standard Unbreakable glass material complete fixed with 40 mm long screws, rawl plugs etc complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

20 mm nominal bore

15 mm nominal bore

Providing & fixing GI Union in GI pipe including cutting & threading the pipe & making long screws etc.complete (new work)

20 mm nominal bore

15 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing & fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality & make, weighing not > 1.970 kg.

Providing and fixing ISI marked aluminum Hardware Fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

250x16mm Sliding Door Bolt

150x10mm Tower bolts

100x10mm Tower Bolts

125mm Handles

75mm Handles

Casement Stays

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter /10sqm over & including priming coat of exterior primer applied @ 2.20kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

P/F Panel Board with control arrangement including cost of MCCB's of approved quality make of legrand's/havells as per directions of site incharge

Providing and laying of 1.5mm sqm wire through PVC conduit ,the item includes providing and fixing of pvc conduit in walls and providing /fixing 6 Amp switch and socket of approved quality , 7-9 watt L.E.D lights, junction box etc complete job (as per directions ) of engineer incharge.

Providing and laying of 4.00mm sqm wire through PVC conduit ,the item includes providing and fixing of pvc channels on walls and providing /fixing 16 Amp switch and socket of approved quality ,junction box etc complete job (as per directions ) of engineer incharge

Providing and fixing of exhaust fans of approved brand and make like Bajaj, Orient. Size 1-00'x1-00'.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single Lt. upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm).

Providing and fixing plain eaves boarding made from colored galvanized Profile Iron Sheets of 0.50mm thick and 300mm width fixed with self driving/self tapping screws as per site requirements.

Providing and Fixing Plain Soffit boarding made from colored galvanized iron Profile sheets of 0.50mm thick fixed with Self driving/self tapping screws as per site requirements.

Carriage of Soling Stone from Source to Site of work for an average lead of 15Kms.

Carriage of Sand from Ganderbal to Site of work for an average lead of 25 Kms.

Carriage of 20mm Stone Aggregate from Source to Site of work for an average lead of 15Kms.

Carriage of 40mm Stone Aggregate from Source to Site of work for an average lead of 15Kms.

Carriage of Bricks from Source to Site of work for an average lead of 15Kms.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections & other sections of approved make conforming to IS: 733 & IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom & sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred & jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/panelling, CP brass /stainless steel screws, all complete as per architectural drawings & the directions of Eng.-in-Charge (glazing, panelling & dash fasteners to be paid for separately)Powder coated aluminum(minimum thickness of powder coated 50 microns)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters & partition frames with C.P. brass/stainless steel screws etc. complete as per architectural drawings & directions of engineer-in charge.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminum

Providing and fixing aluminum tee channels (heavy duty) with rollers, stop end in pelmets as curtain rods.

Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete.

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage.

Supply, Installation, testing and commissioning of split type (Hot & cold) 5 Star rating inverter technology, 1.5 ton AC including auto Stabilizer of required capacity, installation charges complete. The job includes cost of accessories like wires, PVC channels, MCB's etc T & P Charges all complete for all leads and lifts and all sorts of carriage.

(Part B) Earth work in excavation by Mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth & disposal of surplus excavated earth within a lead of 50 metres: All kind of soil.

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329. 100 mm dia Ductile Iron Class K - 9 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 100 mm dia pipes

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.

80mm dia.

40mm dia

25mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

50mm dia

40mm dia

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Complete job 2nd Class

100mm dia

80mm dia

Construction of MS Chamber Boxes made out of 6mm, 8mm, MS sheets on 40mm angles for proper safety and functioning of Gate Valves and Sluice Valves. The job includes welding charges, labour charges and all sorts of carriages etc. (complete job)

Providing, fixing of MS pipe specials, fabricated from 8mm thick MS Sheets at Site. The job includes all types of carriages, labour charges etc Complete Job.

Providing/ Fixing of 10mm/12mm Thick MS Flanges by of welding. The Job includes cost of Nuts, Bolts, Washers and all types of carriages etc complete Job

200mm dia

150mm dia

100mm dia

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead

150 mm dia. Pipe

100 mm dia. Pipe

Supplying pig lead at site of work.

Providing and Supplying Spun Yarn to pipes including all carriages to site of work.

Carriage of pipes from Divisional Store up to the actual site of work by Mechnical Treansport for an Avg. lead of 10Kms.

(Part C) Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Providing and Laying Stone soling hand Packed in level.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size).

Providing & laying in position cement concrete of specified grade including curing but excluding the cost of centring & shuttering.All work upto plinth level with 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size)

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom. With medium setting bitumen emulsion On W.B.M. /W.M.M. @ 0.4 Kg/sqm.

2.5 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% 12.5 mm nominal size and 40% with 10 mm nominal size) @ 1.65 cum per 100sqm and coarse sand @ 1.65 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen including consolidation with road roller of 8 to 10 tonne etc complete (tack coat to be paid separately) With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt.

Providing and laying seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Carriage of Materials by Mechanical transport including loading unloading complete

Stone soiling for an Avg. lead of 15 Kms

40mm Stone aggregate for an Avg. lead of 15 Kms

Sand for an Avg. lead of 25 Kms.

AVENUE ENTERPRISES

KESARIMPEX