Restoration of BT Surface at Green Garden in Ward No - 8 East zone, Coimbatore Corporation

Earth Work Excavation in all Soil with Initial Lead and Left etc., Complete a) Ordinary Soil (SS 20 A) Earth work excavating and depositing on bank with intial lead of 10 m & initial lift of 2 m in and, silt or other loose Soil, Wet Sand or silt not under water, light black cotton soil sandy loam and 106.25 cum 116.88 ordinary soil including excavated earth (SS 20 A)

Removal of Excavated Excess Earth away from the site to 2 K.M including loading and transportation charges etc, complete as per standard

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime coat of 7kgs/10sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying tack coat of 2.5kgs/10sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binderas tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying of 25mm compacted thick Semidence Bituminous Concrete using 0.10m3 of11.2mm IRC metal/ 0.16m3 of 6.7mm IRC metal and 0.11 m3 of 2.8mm and below with 24 kgs ofbitumen of grade 60/70 for premixing per 10 m2 including cost and conveyance of all materials to CMPsite, heating the bitumen and aggregates to required temperature and mixing them in requiredtemperature in central hot mix plant 20-30 tonnes capacity conveying the mix by tipper trucks to power site spreading the mix in required temperature for uniform thickness of 25mm with mechancial paverto the specified grades and cross section and compaction by 80-100 KN power roller to the requireddensity etc., including labour for loading bitumen into bitumen tank and metal to feeder unit, labour forattending to paver site etc., including hire chrages and fuel charges for 20-30 T CMP with bitumenboiler, tipper trucks, power finisher power rollers and all another tools and plant required including allother incidental charges etc., completed as per specification using cmp clause 511 of MOSTspecification.

Add :- GST @ 18%