Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAdmitted-Finance RAMLILA GROUND MAHABIR COLONY RAMLILA GROUND MAHABIR COLONY HISAR 125001 | HISAR | HARYANA | 125001 | ₹8.2 L | L1 | Admitted-Finance |
| 2 | L2₹7.9 L−₹26,759 (3.27%)Admitted-Finance BALAJI COLONY GALI NO 3 OLD BYE PASS KAITHAL 136027 | KAITHAL | HARYANA | 136027 | ₹7.9 L−₹26,759 (3.27%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SITA RAM ENTERPRISES L1 | The Sangam Co-Operative Labour and Construction Society Limited Kaithal L2 |
|---|---|---|---|---|---|
| 1.00 | Supply of Aluminium cable make should be as equivalent grade as capable for 650/1100V, XLPE Insulated, cores laid up, PVC tape,inner sheathed for Multicore Cables Make should be as equivalent grade of havells, RR Kabel, polycab,grandley etc. make Approved by PWD/ DULB and as per directions given by Engineer-in-charge, complete in all respects | 2,380 | Metre | 160 ₹3,80,800 | 125 ₹2,97,500 Lowest |
| 2.00 | PCC Pole 11.0M Long. | 10 | Each | 4,300 ₹43,000 Lowest | 4,500 ₹45,000 |
| 3.00 | Two Year Rate Contract of LED Street Lights of various wattages with 5 years warranty for the municipalites in the state of Haryana by Urban Local Bodies Haryana, Memo No. 45/HR/EC/E-5/2022-23/20210 Dated 16.01.2024
Three Phase CCMS Panels with 5 year warranty | 1 | Each | 1,28,814 ₹1,28,814 | 50,000 ₹50,000 Lowest |
| 4.00 | 45 watt Street light:- Supply and Erection of LED-based flood light, and it must be posses the following minimum specification:- 1. The 05 years warranty will be given by the Manufacturer/Brand area Manager in written. Only then, LED light will be acceptable. 2. LED lights fittings as per list approved by DULB/PWD Department etc. | 25 | Each | 2,000 ₹50,000 Lowest | 3,000 ₹75,000 |
| 5.00 | 72 watt Street light:- Supply and Erection of LED-based flood light, and it must be posses the following minimum specification:- 1. The 05 years warranty will be given by the Manufacturer/Brand area Manager in written. Only then, LED light will be acceptable. 2. LED lights fittings as per list approved by DULB/PWD Department etc.
1 Input voltage:- 90-270 V, AC standred with cut off at 300v with automatic on provision. for protection from surge high voltage the provision of auto shut down should be provided. 2 Input Frequency:- Input Frequency =50 Hz plus 3%
3 Power factor :- (greater then 0.95)
4 Working Humidity:-10% to 90% RH
5 Working temperature:- -10°C to ( plus ) 50°C)
6 Luminary efficiency:- greater then equal to 100 lumen/watt as per LM79 data from certified third party testing facility like NABL approved lab/UL Lab.
7 Optics-Lens Material/Make of lens:- High impact polycarbonate (PMMA)/Cathode, Ledlink, Ledil.
8 Luminary Housing:- power pressure die cast aluminium housing with ADC 12 Or LM6 alloy and toughened glass cover.
9 Screws, Fasteners and Clamping material:- Stainless steel Grade – 304.
10 Surge / Spike Protection:- 4 KV (internal) and 10 KV using external certified surge protector.
11 Make of LED:- Lumileds/Cree/Osram /Nichea /Samsung/Seoul or any other equivalent.
12 Color Temperature:- 5500-6500K
13 Color rendering index:- greater than or equal to 70
14 Life expectancy of the project (LEDs):- Minimum 50000 hrs. with minimum 70% lumen output L70 data to be produced for LEDs and LM79 for Luminaries.
15 LED Printed Circuit Board:- Metal Core Printed Circuit Board. Thermal Conductivity greater then or equal to 2W/MK
16 Class of Power Supply:- Class II, LVLE input output isolations (Max 100 VA output)
17 THD:- less then or equal to 10%
18 Uplight:- Zero Uplight as per LM79 report from NABL/Lighting Facts/accredited third party testing facility. 19 Photomtry :- LM79 Report from NABL/Lighting Facts accredited lab for all variants.
20 Lumen depreciation (L-70) :- greater then or equal to 50,000 hours (as per TM21 using L80 data and INSITU data by LED manufacture LM 80 report).
21 Ingress Protection:- IP66 as per IEC 60598/IEC 60529 from NABL accredited lab for all LED.
22 Conducted Emission and Radiation:- Emission test report from NABL accredited lab conforming limits complying with IEC 61000.
23 Driver Test:- As per BIS
24 Wattage Variation:- ±10%
25 Wattage of LED:- 1-3 watt
26 Pole entry dia :- Should be suitable for mounting of 30 to 56mm outer diameter poles with locking bolts / should provide with complete bracket with locking bolt.
27 LED drive current:- less then1000mA
28 Beam angle:- 80° / 135° with lens
29 Safety Test:- As per IEC 61347 – 2 - 13
30 LED lights fittings as perlist approved by DULB/PWD Department
31 LED light fitting will provide a on site Guarantee/Warranty certificate applicable for minimum five(5) years from the date of commissioning of LED lights fitting from company in written. | 65 | Each | 3,333 ₹2,16,645 Lowest | 5,000 ₹3,25,000 |
Tender Value
₹9.9 L
EMD Value
₹19,840
Closing Date
3 Oct 2025, 5:00 pmClosed
Om Prakash Kardam
Municipal Corporation Karnal
Estimate for providing and fixing 70-watt energy-efficient LED Street lights on 11 mtr. PCC pole at Pingli Dairy and 45 Watt lights at Railway Foot over bridge Ram Nagar Under Municipal Corporation Karnal (Recall)
2025_HRY_474714_1
2025344993BF 6224 45A8 9D63 311C1644B5D2747ULB
Open Tender
Civil Works
Works
60 days
Karnal
2 documents required · 2 mandatory
₹1,000
₹19,840
Yes
9 Oct 2025
26 Sept 2025
4 Oct 2025
26 Sept 2025
3 Oct 2025
26 Sept 2025
Amount
Supply of Aluminium cable make should be as equivalent grade as capable for 650/1100V, XLPE Insulated, cores laid up, PVC tape,inner sheathed for Multicore Cables Make should be as equivalent grade of havells, RR Kabel, polycab,grandley etc. make Approved by PWD/ DULB and as per directions given by Engineer-in-charge, complete in all respects
PCC Pole 11.0M Long.
Two Year Rate Contract of LED Street Lights of various wattages with 5 years warranty for the municipalites in the state of Haryana by Urban Local Bodies Haryana, Memo No. 45/HR/EC/E-5/2022-23/20210 Dated 16.01.2024 Three Phase CCMS Panels with 5 year warranty
45 watt Street light:- Supply and Erection of LED-based flood light, and it must be posses the following minimum specification:- 1. The 05 years warranty will be given by the Manufacturer/Brand area Manager in written. Only then, LED light will be acceptable. 2. LED lights fittings as per list approved by DULB/PWD Department etc.
72 watt Street light:- Supply and Erection of LED-based flood light, and it must be posses the following minimum specification:- 1. The 05 years warranty will be given by the Manufacturer/Brand area Manager in written. Only then, LED light will be acceptable. 2. LED lights fittings as per list approved by DULB/PWD Department etc. 1 Input voltage:- 90-270 V, AC standred with cut off at 300v with automatic on provision. for protection from surge high voltage the provision of auto shut down should be provided. 2 Input Frequency:- Input Frequency =50 Hz plus 3% 3 Power factor :- (greater then 0.95) 4 Working Humidity:-10% to 90% RH 5 Working temperature:- -10°C to ( plus ) 50°C) 6 Luminary efficiency:- greater then equal to 100 lumen/watt as per LM79 data from certified third party testing facility like NABL approved lab/UL Lab. 7 Optics-Lens Material/Make of lens:- High impact polycarbonate (PMMA)/Cathode, Ledlink, Ledil. 8 Luminary Housing:- power pressure die cast aluminium housing with ADC 12 Or LM6 alloy and toughened glass cover. 9 Screws, Fasteners and Clamping material:- Stainless steel Grade – 304. 10 Surge / Spike Protection:- 4 KV (internal) and 10 KV using external certified surge protector. 11 Make of LED:- Lumileds/Cree/Osram /Nichea /Samsung/Seoul or any other equivalent. 12 Color Temperature:- 5500-6500K 13 Color rendering index:- greater than or equal to 70 14 Life expectancy of the project (LEDs):- Minimum 50000 hrs. with minimum 70% lumen output L70 data to be produced for LEDs and LM79 for Luminaries. 15 LED Printed Circuit Board:- Metal Core Printed Circuit Board. Thermal Conductivity greater then or equal to 2W/MK 16 Class of Power Supply:- Class II, LVLE input output isolations (Max 100 VA output) 17 THD:- less then or equal to 10% 18 Uplight:- Zero Uplight as per LM79 report from NABL/Lighting Facts/accredited third party testing facility. 19 Photomtry :- LM79 Report from NABL/Lighting Facts accredited lab for all variants. 20 Lumen depreciation (L-70) :- greater then or equal to 50,000 hours (as per TM21 using L80 data and INSITU data by LED manufacture LM 80 report). 21 Ingress Protection:- IP66 as per IEC 60598/IEC 60529 from NABL accredited lab for all LED. 22 Conducted Emission and Radiation:- Emission test report from NABL accredited lab conforming limits complying with IEC 61000. 23 Driver Test:- As per BIS 24 Wattage Variation:- ±10% 25 Wattage of LED:- 1-3 watt 26 Pole entry dia :- Should be suitable for mounting of 30 to 56mm outer diameter poles with locking bolts / should provide with complete bracket with locking bolt. 27 LED drive current:- less then1000mA 28 Beam angle:- 80° / 135° with lens 29 Safety Test:- As per IEC 61347 – 2 - 13 30 LED lights fittings as perlist approved by DULB/PWD Department 31 LED light fitting will provide a on site Guarantee/Warranty certificate applicable for minimum five(5) years from the date of commissioning of LED lights fitting from company in written.
Bidder Name
Amount
SITA RAM ENTERPRISES (GSTN-NA) BID ID -1347324
The Sangam Co-Operative Labour and Construction Society Limited Kaithal (GSTN-NA) BID ID -1346311
SITA RAM ENTERPRISES (BID ID -1347324)
The Sangam Co-Operative Labour and Construction Society Limited Kaithal (BID ID -1346311)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .