CERTAIN REPAIR TO CONCERTINA COIL BARBED WIRE FENCING METAL FENCING COMPOUND WALL MISC WORKS AT GTRE CABS STIR AND CEMILAC BANGALORE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete.

Demolition of brick work, for drain,brick work ,concrete or stone boulder masonry built in cement mortar complete all as specified and as directed .

Demolition of reinf cement concrete in any description and in any position not otherwise specifically provided , (reinforcement cut as required to fecilitate demolition ) below or above ground level.

M&L for RCC band in compound wall in 1:2:4, type B-1 (using 20 mm graded stone aggregate) complete all as specified and as directed

M&L for providing precast cover slab in 1:2:4, type B-1 (using 20 mm graded stone aggregate) complete all as specified and as directed

M&L Galvanised, 2 strand steel barbed wire, 2.24 mm dia barbed with 2 mm dia, barbs at 75 mm spacing, as in fencing including straining and fixing to any type of fencing posts or standard rails, straining bolts, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins etc complete, all as specified and directed

Dismanling Sructural steel work including door ,gates but excluding framed work.

S & F mild steel work as in doors or gate of angle Rungs in static tank of other section gusset plate rails ladder & Hand rail including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -O or Fe 310 - 0, complete all as specified and directed by Engineer-in-Charge

M&L mild steel work of such as grill of compound wall ,post,struts ,grating angle iron (Fe 410-Gd or Fe 310) including cutting top to shape as directed, drilling holes for nut and bolts etc including flat iron fillets for securing wire mesh staying the post in a true vertical position embedded in concrete, complete all as specified

Supply & Erection of ZAL SRPBT fence comprising of 600mm dia helix coil(before Streching) composed of ZAL SRBT tape and 2.60mm galvanised HTSS core wire ,each concertina coil shall be having minimum 6 circles per running meter of fence: razor punch tape shall be hot deep alloy coated comprising of aluminium with Zinc (ZAL) which shall there after be subjected to conversion coating treatment and final acrylic polyurethene top coating of green shad:ZAL SRBT barbs with dimensions as 23.50mm barbs length 36.00mm spacing including 7Nos of consec ZAL SRPBT horizontal runner strands on fence post over the boundry wall along with GI erection accesssories like box clips ,C clips ,J clips for coil joining during erection complete sll as specified and directed.

M&L galvanised iron with zinc coating 4mm dia wire fixing in metal fencing above compound wall completee all as speified and directed by Engr-in Charge

S & F Chain link MS galvanised fencing size or any type wt 3 to 4 Kg per sqm including taking down old complete all as specified and as directed

Excavation in trenches not exceeding 1.5 m deep for foundation, etc in soft soil specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing of demolition/excatated materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation and fixing of poles and similar works complete all as specified and as directed.

M & L for walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed

M & L for walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but except Stone all as specified but except stone complete

M&L for pre-cast cement concrete, type C1 (PCC 1:3:6), block masonry with solid blocks, exc 10 cm in width and setting mortar in cement mortar 1:6, complete all as specified and as directed

M&L for providing PCC 1:2:4, type B1(using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.20mm complete all as specified and as directed

M&L for providing PCC 1:2:4, type B2 (using 20mm graded stone aggregate) in surface channels & drains complete all as specified and as directed

Extra for forming fair finished drain or channel 30 to 60 cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stopped ends etc complete all as specified and as directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus oil to a distance n exc 50m and making good surface in hard/dense soil.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and as directed

S & F TMT steel bars 6-8 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and as directed

S & F TMT steel bars 6 to 8 mm dia in stirrups, spacers and binders complete all as specified and as directed

Taking down existing compound wall grill and refixing in same place complete

M&L Welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded exc.6mm but n.exc 9mm complete all as directed.

Material and labour for 75mm thick plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed. Note : The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the the item.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for desilting and cleaning drain from mud, hard material like stone/brick etc complete all as directed.

Dismantling Interlocking Paver as specified and directed.

Labour only removing undulation interlocking paver block making good surface and refixing in same place

Supply and fix Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified and as directed

Material and Labour for sand filling under floor including watering, consolidation, and well ramming complete all as specified and as directed.

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

M&L Rendering 15 mm thick stone masonry wall surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed

M&L applying 2 coats of Exterior emulsion Finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall new plaster surface including cornices, plasters etc by all as specified and directed (Make/Brand Name : Asian Paints/Apex ultima, Berger Paints/Weather coat All Guard, Jenson /Nicholson/Safe Guard).

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Preparation of Old concrete surfaces as in kerb stone of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old concrete surfaces as in floors of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel and iron based surfaces of any description over 10cm width of girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel painting over a coat of red oxide primer on steel surfaces exceeding 10cm width or girth complete all as specified and as directed

ABHISHEK CONSTRUCTIONS

HEERA CONSTRUCTION CO.

Atom Engineers and Builders

SM CONSTRUCTIONS

Prashanth Associates

G K CONSTRUCTIONS

Lucky Enterprises