REPAIR TO JOINERY, CHAJJA, FACIA, PLASTERING OF CERTAIN MD ACCN AT AF STN BKT.

Amount

Taking down shutters of any description n exc 1 sqm each complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed

Taking down chowkats with shutter (without taking off shutter from the frame) exc. 1.5 sqm & n. exc 4 sqm each complete all as specified and directed

All as per item No 3 but n. exc 1.5 Sqm each complete all as specified and directed

S & F 35mm thick, 2nd class HW, plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F IInd Class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, suppling & fixing in opening as per specification & drawing given as per SSR Part-II section-8 on page 158 all as per specified and directed

S&F Flush shutters, solid core 40mm thick construction, with block board core and plywood face panels, commercial type on both sides complete all as specifiedand directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed ti the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as specified and directed

M&L for aluminium powder coated door frame and shutter including top, bottom/middle rail using glazing clip including rubber head and float glass 6mm thick tinted provided with one floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to aluminium door and other fittings like handle, locking system, push plate and necessary beading all around the door shutter frame as required for resistance complete all as specified and directed and as per Chief Engineer (AF) Allahabad Drg No CE/ALD/TD-224 Sh 1/1 dated 17 Oct 2012.

M&L for aluminium powder coated sliding window, ventilator three track including aluminium powder coated decorated grill sliding shutter 5mm thick tinted float glasses, necessary aluminium beadings fittings and other panels to prevent air from out side complete all as specified and directed and as per Chief Engineer (AF) Allahabad Drg No CE/ALD/TD-194 Sh 1/2(R) dated 29 Feb 2012 and revised upto 01 Aug 2012 and Sh 2/2 dated 29 Feb 2012.

S&F for 18mm thick PVC board of one side prelaminated or digital finished and other side plan white colour to make kitchen cabinet shutter/drawaer front shutters complete with and including all fittings as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion

S&F for 18mm thick PVC board both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete with and inculding all fittings as per specifications, complete all as specified and directed Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion

S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

All as per itm No 14 but without glazing bar complete all as specified and directed

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde- E-165 complete all as specified and directed

S&F pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike, plate, etc complete all as specified and directed

S&F butt hinges 100mm size stainless steel complete all as specified

S&F butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S& F aluminium handles fabricated type anodised 150mm size complete all as specified and directed

S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast pr extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S & F in repair 300mm brass ordinary rat tail rod pattern springs including roller and roller plate fixed in iron frame complete all as specified and as directed

S & F 300mm brass ordinary rat tail rod pattern springs including roller and roller plate fixed in iron frame complete all as specified and as directed

M&L Preparation of new surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint,over one coat pink primer complete all as specified and as directed

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples fixed all as specified and directed

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples fixed all as specified and directedd

Refixing shutters of any description n exc 1 sqm each in same opening incl. taking down complete all as specified and directed

All as per item No 30 exc 1.0 Sqm but n. exc 2 Sqm each complete all as specified and directed

Dismantling of floor hearth and wall tiling incl mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F for non-skid ceramic any coloured and pattern tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floor etc over 15mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in white cement with pigment to match the coloured cement to match the surface complete all as specified

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed all as specified and directed

M&L for glazed ceramic coloured/printed tiles (colour & shade as approved by GE) of size 300 x 450mmx 7-8mm thick in verticle surfaces as in skirting and dado set and jointing neat cement slurry, over 10mm thick rendering in cement mortar (1:4) and pointed, in white cement with pigment to match the colour of tiles complete all as specified and directed

M&L machine cut kota stone slab flooring 18-20mm thick cement screed 15mm thick in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L machine cut kota stone slab in verticle surfaces 18-20mm thick cement screed in 15mm thivk CM 1:4 base laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab including including rubbing & polishing complete all as specified and directed.

M&L on grinding for existing old surface/cutting and treating the surface with beeswax polish complete all as specified and directed.

M&L light shade Coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

M&L light shade Coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified.

Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed

M&L for 15mm thcik rendering on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed

Supply only Integral water proofing compound as specified and directed.

M&L for 15mm thcik rendering on other than fair faces of brick work in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed

M&L for cutting and making good of existing re-inforced cement concrete as in chajja, facia and similar work exc and rendering 15mm thick in cement mortar 1:3 surface finished even and smooth without using extra cement with water proofing compound @ 3% by weight of cement as per manufacturer's instructions, uoto height 9.50 m complete all as specified and directed. Note : WPC shall be measured & paid speerately under respective item here-in-before.

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper complete all as specified and directed

Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel frames, glazed with putty or fixed with beads complete all as specified and directed

S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.50M height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed

S&F 5.5mm thick one side looking glass panes and glazing fixed with aluminium frame/uPVC frame complete in squares n.exc 0.50 sqm each panes complete all as specified and directed

S&F 4mm thcik figured glass, pin head type and glazing with oild putty in squares n exc 0.50 sqm in each pane complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified or directed

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in sub base of floor complete

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) 40mm thick as in flooring finished cement concrete surface even and smooth without using extra cement complete all as specified

S&F in repair stainless steel curtain rod 20mm dia decorative type with fixing of brackets, steps, roller suitable size of knob complete all as specified and directed

Taking down existing PVC low level flushing cistern including bend, flush pipes etc and M&L for providing 10 Ltrs capacity PVC low level flushing cistern including chromium plated brass inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length incl making necessary connections to water supply pipe line jointing to WC all as specified and directed.

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fush pipe etc compete all as specified.(fixed in repair)

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore complete all as specified and directed

S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore complete all as specified and directed

S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.

S&F providing and fixing factory made UPVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware- door espag, lever doorhandle, standard cylinder, centre striker, 3D hinges, striker, drainage, glazing bridge and silicon sealent [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected payment purpose.) (a) Area not exceeding 2.00 sqm each

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and directed

M/s R K Associates

AP Electric works

H C CONSTRUCTION

LUCKY BUILDERS

M/s A S Associates