Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹38.2 LAccepted-AOC PLOT NO 76 CIV SOCIETY MUKUND NAGAR AHMEDNAGAR 414001 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414001 | 1 | Accepted-AOC Award of Contract | |
| 2 | 2₹43.0 L+₹4.4 L (11.4%)Rejected-Finance | 2 | Rejected-Finance Not Being Lowest | |
| 3 | 3₹43.3 L+₹4.7 L (12.2%)Rejected-Finance | 3 | Rejected-Finance Not Being Lowest | |
| 4 | 4₹49.3 L+₹10.7 L (27.8%)Rejected-Finance | 4 | Rejected-Finance Not Being Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
23 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
Smart Day to Day Complaints based comprehensive Maint in Offrs MD Accn in AGE B and R - I under GE (N) Ahmednagar
2024_MES_645689_1
8838
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (N) Ahmednagar
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineers (North) Ahmednagar
₹98,000
Yes
18 May 2024
8 Mar 2024
25 Apr 2024
8 Mar 2024
23 Apr 2024
10 Apr 2024
Amount
Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed
Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.
M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6
M & for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, kneelers, including weathering, slightly rounded or chamfered angles and throating, as directed
Material and labour for special treatment ot sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat Each of Nittoproof 120 on plastered surface rendering again 10mm thick in CM 1:4 mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge. Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement with WPC.Note:- WPC shall be measured & paid seperately.
M&L for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.
M&L for rendering 5 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed.
M & L applying two coats of OBD over a coat of primer Chalk whiting, on plastered surfaces, prepara-tory to distempering on newly plastered wall surfaces all as specified and as directed.
M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash.
M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.
Supply only integral water proofing compound
M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge.
M&L for preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white washincluding scafolding at any height complete all as specified and directed by Enggineer-in-charge.
M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.
Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Enggineer-in-charge..
M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Enggineer-in-charge..
M&L for complete removal of existing treatment and prepartion of surfaces on surfaces of walls and applying two coat of acrylic distemper Chalk whiting, on plastered surfaces, prepara-tory to distempering including scafolding at any height complete all as specified and directed by Enggineer-in-charge.
M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.
Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 .
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6
M&L for Glazed ceramic coloured in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc.
Material and labour for machine cut cudappah stone 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed for vertical support.
M&L for rounding to edges of stone slabs one edge ,such as in steps cooking platform and other similar situations
M&L for 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite.
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.
Material and labour for 25 mm thick Rough dressed sand stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3 including 15 mm thick screed bed in cement and sand mortar (1:6), etc complete all as specified and directed by Engineer-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by Engineer-in-Charge
Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.
Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.
Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.
Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.
M&L for re-fixining same opening of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.
Re-securing or easing & adjusting, without taking down shutters of any description not exceeding 1 Sqm each.
Re-securing or easing & adjusting, without taking down shutters of any description exce 1.Sqm and not exceeding 2 Sqm each.
S&F IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2020
M&L for Aluminium framed windows any pattern, fixed/side hung/silding ( three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, glazing all as specified Note-: (glazing shall be measured and paid separatly)
S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides .
S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified inSSR part-I section 8 clause 8.20 (a) fitted to chowkats .
Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.
Ditto all as per item No 49 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.
S&F sheet glass ordinary quality 3 mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.
Ditto all as per item No 48 above but pin head type
S&F sheet glass ordinary quality 4.8 mm thick with oil putty exceeding 0.5 sqm in each pane all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.
Ditto all as per item No 51 above but fixed in repair to steel/wooden shutters
S&F in repair butt hinge, stainless steel 100mm long all as specified and as directed.
S&F in repair butt hinges stainless steel 75mm long all as specified and as directed.
S & F in repairs Continuous (Piano) hinges, stainless bright finished or electro galvanized, width of flaps (When open) 30 mm
S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.
All as per item No.56 Above but fixing only.
S&F Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.
All as per item No. 58 above but fixing only.
S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.
All as per item No.60 above but fixing only.
Ditto all as per item No 60 above but 150mm long
All as per item No.62 above but fixing only.
S&F extruded aluminium alloy handle fabricated type anodised 150 mm long
All as per item No. 64 above but fixing only.
Ditto all as per item No 64 but 100mm long
All as per item 66 above but fixing only.
S&F Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws 100 mm long all as specified and as directed.
All as per item No. 68 above but fixing only.
M&L for mild steel frame work such as grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0 and taking down old one .
M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
Ditto all as per item No 71 above but on steel surfaces over red oxide primer
S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.
All as per item No.73 above but fixing only.
S & F as in repairs of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. brackets etc all as directed
All as per item No.75 above but fixing only.
M&L for welding in repairs n exc 2.5cm in length n exc 6mm thick all as specified .
M&L for welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) incl taking down old one
Taking down aluminium doors/windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.
S&F Pressed steel frames for doors with one or more rebates of size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as pecified, supplied and fixed
Dismantling of particle board,any thickness including cover fillets
M&L 25mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with ccrews to timber frame work all as specified.
Dismantling boarding, any description, fixed in wall or ceiling, any position with nails
S&F powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of min tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc complete including GI wire hangars at 1200 mm intervals all as specified as per manufacturere's instructions and all as directed
M&L for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed
S & F in repair vitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed . Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor . Make of parryware Code :Flair C0476 or others equvelent in jaquar and Hindware
Supply and fixing in repair Table top wash hand basin size 480 x 480x 2000 excluding taps, waste, chain and plug but including brackets,necessary 32/40 mm brass chromium plated bottle traps with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed and cutting for bottle trap and pinning in ends of brackets or erecting stand.Make of parryware Code :Flair C0464 or others equvelent in jaquar and Hindware
S&F in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest 'P' or 'S' trap, including taking down old one complete all as specified and as directed.Make of parryware Code :white C0117 or others equvelent in jaquar and Hindware
S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren
S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed
S&F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.Make of parryware Code :Flair white E8094 Regular or others equvelent in jaquar and Hindware
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.Make of parryware Code :T6703A1 or others equvelent in jaquar and Hindware
S & F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm.Make of parryware Code :T6403A1 or others equvelent in jaquar and Hindware
S&F Towel Ring of PTMT and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms). Make of parryware Code :T6002A1 or others equvelent in jaquar and Hindware
S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms). Make of parryware Code :T6001A1 or others equvelent in jaquar and Hindware
S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.Make of parryware Code :T6005A1 or others equvelent in jaquar and Hindware
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/CmSqcm fixed complete in wall ,floor etc including taking down old one all as specified and as directed.
S & F in repairs 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.
Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing
Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing
S&F 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.
S&F 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.
Disconnecting existing tanks,exc 250 n.exc 500 Ltrs capacity setting aside for repairs, cleaning etc. and hoisting if required reconnectiong and re-fixing in position.
Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit.
S&F 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed .
All as per Item No 107 above but 1000 ltrs capacity.
S and F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule
All as per item No.109 above but fixing only.
S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. Make of parryware Code :G1951A1 or others equvelent in jaquar and Hindware
All as per item No. 111 above but fixing only.
S&F in repair 15 mm bore Fancy type sink taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.Make of essco Code :TQT-523S or others equvelent in parryware and Hindware
All as per item No.113 above but fixing only.
S&F 15mm dia Chromium plated fancy type Bib taps long shank cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of essco Code :DLX-512KN or others equvelent in parryware and Hindware
S&F 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of essco Code :ORB-105037 or others equvelent in parryware and Hindware
Fixing only 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe all as spd & directed
S&F in repair Brass chromium Brass CP wall mixer 3 in 1 system with provision of hand shower/overhead shower for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed. Make of jaquar Code :COP-281PM or others equvelent in parryware and Hindware
S&F in repair Brass chromium Brass quarter turn CP hole basin mixer without popup for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed. Make of jaquar Code :COP-167BPM or others equvelent in parryware and Hindware
Fixing only Brass chromium Brass quarter turn CP hole basin mixer without popup for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed.
S&F nipple 20mm dia suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)
All as per item No.121 above but fixing only.
Making connection of PP-R pipe/GI 16 to 40 mm distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc.
Fixing/resecuring/repair only to existing Squatting pan including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor.
Fixing/resecuring/repair only to existing wash basins Vitreous China (flat back or angle back type) any size on existing brackets or stand.
Fixing/resecuring/repair only in repair to existing Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs
Fixing/resecuring/repair only to existing Gratings, fixed in repairs
Fixing/resecuring/repair only to existing CP bib taps/pillar taps/wall mixture/hole basin mixer with required washer,spindal,nipple,elbow etc , fixed in repairs
Fixing/resecuring/repair only to existing Joint between fluslhing pipe and socket of W.C. pan; pre-made
Fixing/resecuring/repair only to existing Health faucet fixing in pipe etc. complete
Fixing/resecuring/repair only to existing Seat and cover for pedestal pan
Fixing/resecuring/repair only to existing stop cock/angle cock of any size
Taking down and refixing old steel tubing of 15/20 mm bore and connections in new or old position after repair (walls, ceilings, floors etc.)
Cutting existing steel tubing for alterations or additions (Each cut measured) without taking down steel tubing all specifed and as directed.
S&F of any type of Elbows/reducer brass both ends screwed and fixed of 15 mm dia in repairs
S&F any type of Unions/spindal brass to connect iron to polyethylene and fixed of 15 mm dia in repairs all specifed and as directed.
S&F Unions brass to connect iron to polyethylene and fixed of 20 mm dia in repairs all specifed and as directed.
S&F Nipple suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm- 45gms /25mm- 65gms) all specifed and as directed.
S&F waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms) all specifed and as directed.
All as per item No. 139 above but fixing only.
S&F in repair Brass chromium plated bottle traps of 32 mm dia for wash asins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all specifed and as directed.
S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) all specifed and as directed.
S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union. Make ofessco Code :EOS-542A or others equvelent in parryware and Hindware
S&F shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) all specifed and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm all specifed and as directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls all specifed and as directed.
S & F 110 mm bore PVC (SWR) bends of any radius all specifed and as directed.
All as per item No.147 above but except fittings
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door all specifed and as directed.
All as per item No.149 above but except fittings
S&F PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors all specifed and as directed.
S&F PVC (SWR) bends any radius 75mm bore all specifed and as directed.
S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement all specifed and as directed.
S&F PVC (SWR) floor trap 75mm dia with grating including jointing with solvent cement all specifed and as directed.
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all specifed and as directed.
S&F in kitchen or laboratory sink with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all specifed and as directed.
Supply and fix syphon kit for low level flushing cistern all specifed and as directed.
M&L for Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face all specifed and as directed.
Taking down and re-fixing of Harrison/curtain rails, any type anodised aluminium alloy brackets, stops, rollers etc all specifed and as directed.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 500 n.exc. 1000 Ltrs capacity.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 1000 n.exc. 2000 Ltrs capacity.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250)quality-A,
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
S&F Pre-painted galvalume aluminium zinc coating GI based manglore pattern corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screwsaas specified etc all as directed.
Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as directed.
Cleaning of blocked sewage line of the dia 75 mm to 300 by using bamboo sticks or MS rods and revolving with rope or with sludge sunction /pumping machine inside the sewer line between two manholes and cleaning the sewer line and pouring water under pressure and cleaning and clearing sewer line to efficient and smooth flow of sludge/waste water .
Cleaning of blockage from water closet, Gully trap,nahani trap, floor trap and bends by rodding thoroughly and pouring water under pressure and cleaning and clearing drainage to efficient and smooth flow of sludge/waste water all as specified and directed by Engr-in-Charge (the rates quoted shall be deemed included transport if reqd).
Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar
All as per item No 170 above but 200 mm bore pipe
All as per item No 170 above but 300 mm bore pipe
M&L for 150 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified as following. Note: (i) Cutting into existing sewer line/manhole shall be measured and paid seperately. (ii) Excvation & earthwork shall be measured & paid seperately.
M&L for 200 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .
M&L for 300 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .
M & L Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) for man holes and drain cover slab all as specified and directed.
Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all specifed and as directed.
M&L for dewatering of the following including desluding and pumping out effluent dirty liquid and sludge from bottom of manholes by sewage pump lifting the same upto 4.50 mtr depth of tank/MH incl. collecting sludge and dirty liquid into closed container and cleaning the manholes with fresh water, after wards opening the inlet of manhole for re-use and lifting the sludge to outside premises, as directed by Engr-in-Charge (the rates quoted shall be deemed included transport if reqd).
(a) Manhole of any dimension upto 1.50 mtr deep
(b) Manhole of any dimension exc 1.50 mtr deep but n exc 3.0 mtr deep
(c) Septic tank exc 50 and n exc 100 users capacity
M&l for cutting of existing cracks on wall up to last edge of cracka nd n exc 10 mm wide and clean the groove properly and fill crack with filler adhesive materials (Water proofing sealent) with gunating machine up to last edge of crack in two coat and apply two coat of wall care putty and 2 coat of oil bound distemper.
Day to day complaints for the following works :-
(a) Complaint related to carpenter works like door easing, door repair, kitchen cup board repair, window/door wire mesh/glass pane repair, refixing of building hardware etc by deploying carpentar and mazdoor.
(b) Complaint related to plumbing works like repair/refixing of Bib tap, Stop cock, Angle cock Connection pipes, waste pipes, Flush tank, Flush pipe,Shower, Pvc tank, ball valves, towel rail ,WHB,EWC, waste coupling, Grating,Pillar tap etc.by deploying plumber and mazdoor.
(c) Complaint related to cement works like repair to floors/ wall plaster in patches/ filling of holes, tiles repairs etc. by deploying mason and mazdoor.
Notes for Ser item Nos 180.1 to 180.03 :-The quoted rate of contractor shall comprise the following :-
(i) Contractor shall provide sufficient skilled and unskilled manpower on requirnment basis as directed by engineer incharge for attending and completing the complaints as per the users satisfaction. However, the number of skilled and unskilled manpower shall be increased as directed by Engr in charge depending upon the requirement / number of complaints registered at the complaint center. In case of failure on providing suffiiciet manpower by the contractor, a penalty at the rate of Rs 1000 per skilled person per day and Rs 600 per unskilled person per day shall be levied on the contractor and recovery for the same shall be affected from contractor's dues not withstanding the fact if number of complaints of any nature is less or more. Attendance register shall be maintained by the JE for recording the absentee details and the same register will be signed by the contractor/ Supervisor daily, the AGE weekly and the GE on month end. A separate register based on atttendance register for recording recovery of contractor shall be maintained by the JE and the recovery if any will be forwarded to GE every month for necessary action at his end. Any descripancy or contest on the entries in the attendance register shall be written to GE within 48 hours of the entry in the attendance register, if not than the entries done will be binding and uncontested for. The department is not liable for the contractor signature in the register and it is the contractors prerogative to get it signed either himself or his supervisor.
(ii) The complaints related to carpenter works, plumbing works, cement works and welding works against serial item Nos 180 (a) to 180 (c) shall be completed in 48 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/complaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. A separate register shall be maintained for recording recovery for compliant not attend with in time period by the JE Remaining clauses pertaining to the register same as per para 180 (a) above
(iii) For each complaint, a separate complaint slip shall be prepared by JE/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, compaint slip shall be submitted to concerned executive on the date as per Para 181 (b) above, which shall be got signed from the occupant and shall be produced at the time of payment to be made to the contractor. Complaints pertaining to same location and same nature consisting of replacement of maximum two fixtures in one quarter/ office/ building etc.involving movement of particular tradesman shall be measured and paid as one complaint. Replacement of more than two fixtures but multiple of three fixtures or part thereof in one quarter/ office/ building, etc. shall be measured as additional complaint.
(iv) Ref Item No 180.03 above any compliant of cement work below one Sqm will be given as single complaint, multiple of the same will be given as additional complaint.
(v) Complaint slip and complaint register etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items.
(vi) Necessary transportations, tools, plants, ladders, including nails, screws, PVC washers, brass spindle, for bib taps/ stop cocks/ pillar cocks, cotton thread, Jumper valves, white lead, flush washers, internal fitting of low level flushing cistern, nipple, tee, elbow, plug, socket, reducer (GI/UPVC), M-seal, glass putty, hinges, handle, tower bolt, stopper, cement, white cement, sand other similar minor accessories required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost there of shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.
(vii) Contractor will establish a well furnished complaint cell to recieve the complaints (Petty repair) in the area allocated by Enginner-in-Charge/GE. (viii). Contractor will use the software/ App for receiving the complaints and after the complaint resolved, same will be reflected in Software/ App. Note: a. Cost of purchase of App/ software borne by the contractor only. b. For the security purpose, the access given to use the App/ software will be only from JE/Engineer-in-Charge. c. Photographs and description of the complaint will be filled into App from user side. d. After resolving the complaint, Photograph of the same will be filled by contractor side. (ix) Contractor will deploy a Data Entry operator staff to recieve the complaints made by users in complaint cell from time 9:00 AM to 17:00 PM on all working day. (x) Contractor will deploy sufficient plumber/ Carpentor/Mason/safaiwala/electrician to attned the daily complaints (petty repair) on daily basis. Attendance report of the deployed skilled staff alongwith their healper will be submiited to JE/Engineer-in-Charge on daily basis. (xi) Contractor's supervisor will report on all working days alongwith their skilled staff and printed contractor's firm name complaint slip book at 8:30 hrs at JE/Engineer-in-Charge received complaints from users and to submit completion report/constraints, if any on the same day by 1700 hrs. (xii) Printed complaint slip book as per format approved by Engineer-in-charge shall be provided and maintained by the contractor.
(xiii) If there is any major complaints of tilling/Plumbing/Joinery/ electrician/BS for which additional times/manpowers or T&P as required the same shall be provided by the contractor without any extra cost to Govt. The same will be reoprted to JE/Engineer-in-Charge for taking consent. (xiv) If the complaints will not be attended a recovery @ Rs. 1000 per day shall be recovered from the amount due to the contracor. (xv) Store for attending the complaints will be provided by the contractor on daily basis. (xvi) The contractor will submit the RAR alongwith Completion report of comaplints (petty repair) duly signed by the users and also attendence sheet of deployed plumber/carpentor/mason/electrician alonwith their helper duly signed by JE/Engineer-in-Charge. (xvii) The RAR will be proceed only after verfication of resolved complaints at the site by JE/Engineer-in-Charge. (xviii) Rate quoted in above BOQ shall be deemed to incl the cost of office staff/ office equipment, required T&P/stores and device etc alongwith sufficinet skilled manpowers/ labour to attend/complete the complaints in the same day duly signed by users at the entire satisfaction of Engineer-in Charge. (xviii) It is adivsed to contractor to visit the site before quoting the rates in tender.
Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc
(a) One light point controlled by switch 5 Amp single pole one way
(b) One fan point controlled by switch 5 Amp single pole one way
(c) One bell point controlled by one switch 5 Amp single pole, one way on independent board
(d) One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
(e) One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
(f) All as per Item No 183 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
S&F Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge
S&F Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-Charge
S&F bell push piano flush, single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
S&F bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.
S & F electronic dimmers,as per existing wattage, 250V flush type on the exiting phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 16 Amp, onw way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Socket Outlet 6 Amp, 3 pin, combined two module etc as per existing complete all as specified and directed by Engineer-in-Charge.
S&F Modular Socket Outlet 6 Amp / 16 Amp - 6 pin combined two module as per existing etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
S&F Socket outlet 3 Pin ,6 A etc complete all as specified and directed by Engineer-in-Charge
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,Concealed in wall protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.
Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing MCBs, SPN, AC, 240 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Taking out old PVC/Wooden/metal switch board ,wire connection from the wall and fix new PVC Modular box including connecting wire suitable for fixing switch/Socket/fan regulater of following sizes .(Note.Damaged Switch/Socket/regulator will be measured and paid Sepereately)
Supply and fix Decorative ultra slim square profile LED lighting fixture with extruded metal batten with refreshing design, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 22 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge
Supply & fix 10 Watt LED batten with square profile with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge
S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit 10 W LED luminaire comprising of high brightness LEDs complete with all accessories prewired and including connecting up with & including twin core twisted flexible copper conductor cable of suitable size etc complete all as specified and directed by Engineer-in-Charge
Supply & fix replacemnt industrial type switch socket for Geysers with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 2.5 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge (Make of Cable : Finolex/RR Cable/Havells & Make for PVC Casing & Caping : AKG/PRESTOPLAST/PRECISION): - Note : 1. Porper colour coding must be utilize for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 2.5 sq.mm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit
Taking out/down carefully and opening of existing water Geysers of 25 Ltrs capacity,from any position, of any make etc & refixing after reassembling and after repair /replacement of spare parts/ material/items ( such as outer and inner tank) at the desired location and making necessary water inlet, outlet & electric connections to make it functional with including using material/parts of minor nature such as screws, insulation tape, nuts, bolts, washers etc including cleaning and painting with spray painting to required gloss with white synthetic enamel paint on complete body & writing MES No with black synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement element 2 KW, rubber gasket type with & including rubber gasket complete suitable for 25 Ltrs Geysers of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement PVC insulated cable 40/0.0076, 3 core copper conductor cable for connection from geyser to top plug etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement indicator lamps(set of two -green & red) AC, 220 volts suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement thermostat switch , pointer type with adjustable knob, suitable for 25/50 ltrs capacity vertical type geyser & etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix PVC connection pipe for Geysers complete with brass end terminal size 300 mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix PVC connection pipe for geysers complete with brass end terminal size 450 mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing in replacement thermal cut out suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.
Taking out/down existing ceiling fans upto 1400 mm sweep,from any position, of any make etc and handover to user to deposit E/M Store yard & refixing Serviceable fan at the desired location making electric connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length with & including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement capacitor 2.5 mfd, 250 volts , AC etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of rubber reel, bolt, nut including pin etc complete all as specified and directed by Engineer-in-Charge.
Supply only conopy (top and bottom) of ceiling fan , of any sweep, any make etc complete all as specified and directed by Engineer-in-Charge.
S & F for modular plates white colour with frame of 3 module including removal of old unserviceable one complete complete all as specified and as directed
S & F for modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and as directed
S & F for modular plates white colour with frame of 10/12 module including removal of old unserviceable one complete complete all as specified and as directed
S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed
S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed
S & F blanking plates round/square in wall for fixing Ceiling roses,etc as specified and as directed
Preparing the old painted surfaces of following steel furniture by removing old paint & touching up with Red oxide primer where necessary & denting where necessary & preparing the surfaces & spray / mannualy painting with two coat of synthetic enamel paint as per existing colour of articles all as specified & directed. NOTE : Spray painting shall be carried out mechanically.
Almirah med steel W/S
Almirah large steel W/S
Book Case steel (Glass door)
Chair steel W/O arms
Chair CB Steel W/Arm
Teapoy varandah
Charpoy IP Steel Hardtop
Table 900 x 600 W/O drawer
Table 900 x 600 with drawer
Chair Varandah
Shoe Rack Steel
Bed Hard Steel
M&L One coat of french polish on wooden surface of any width or girth incl scrapping and cleaning all as per drg and as directed by Engineer-in-charge. Polishing to following wooden furniture items shall be carried out in occupied quarters.
Almirah large with shelves
Almirah medium 1/2H 1/2SH
Almirah medium with shelves
Bed with plywood top
Book shelf open large
Book case small
Book case various type
Chair Easy
Chair Dining cushioned
Chair writing
Chair Dining
Hat stand W/M
Peg Table
Table bed side w/o drawer
Teble centre (FD)
Table Dinning 6 persons
Table dressing ladies W/M
Table dressing gents W/M
Teapoy FD
Table writing
Chair tipup wooden
Table 3' x 2' W/O drawer
Table 3' x 2' with drawer
Table Dining 04 Person
Table Dining 08 Person
Sofa Set 05 Seater
Sofa Set 04 Seater
M/S. M. F. Sharif & Co.
M/S CHHTRAPATI CONSTRUCTION
MS. G.A. CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .