PROVN OF SECURITY GUARD POST INCLUDING TOILET FACILITY FOR OFFICE SECURITY GATE OF STEAG ANAND PARBAT MILITARY STN AND OTHER SANCTION WORK UNDER GE NORTH DELHI CANTT10

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in hard dense soil.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall in cement mortar 1:4 coplete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) on fair/un-even surfaces of brick work or concrete surfaces using WPC Copound to be finished even and smooth without using extra cement, complete all as specified and directed. ( WPC paid separatly)

M&L for 15mm thick rendering in CM (1:6) on fair/un-even surfaces of brick work or concrete surfaces to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 5 mm thick rendering in CM (1:4) on ceiling, complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces of wall including preparation, complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces as in ceiling including preparation, complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying two coat of cement base paint over alkali resistence primer on wall complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface.

M&L for 100mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub floor; complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in levelling course, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n. exc. 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement over and including15mm thick screed/bedding layer in CM (1:6), complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 450x300x7mm thick on vertical surfaces such as skilting/dado over 10mm thick rendering in CM (1:4), complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 4mm thick steel glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer in-charge.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing.

S&F aluminium handle cast type anodized 150mm, complete all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

S&F aluminium anodized barrel tower bolts of extruded section of length 150mm and fixed with cadymium plated wood series, complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, coiling or laid in floors of , complete all as specified and directed.

M&L for cutting chasses for concealed water tubing of 15mm dia and making good, complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall, coiling or laid in floors of , complete all as specified and directed.

S&F 10 Ltrs capacity PVC low level valve less flushing cistern (white) symphonic action type with all fittings such as inlet ball valve bloat and handle and flush pipe of polythene, complete all as specified and directed.

S&F ,vitreous china squattting pan, 'Orissa' pattern, size 580 x 440 mm, white, with "P" or "S" trap, with integral foot rests excluding flushing cistern but including connection to trap, anti syphonage pipe etc. complete all as specified and directed. Make : Hindware,Cera,Parryware

S&F PVC connection 15mm dia 450mm long with brass coupling/unions on both ends suitable for flushing cistern and WHB, complete all as specified and directed.

S&F 15mm Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all specified and directed.

S&F angle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. (Make :-Hindware or eq,).

S&F vitreous china wash hand basin with stand white flat back / Ovel Type of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings etc complete all as directed and spcified.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

S&F PVC water tanks 500 ltr cap rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

Form work to soffits of suspended slab such as roof slabs, floor slabs and similar work; n. exc 200mm thick(horizontal or sloping) all as specified and directed by Engr in Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders bressummers, lintels, cantilvers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc.

Form work to edges of concrete flats, floor and roofs n. exc 20 cm wide horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&L Mild steel bars(TMT) 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking for columns hooking ends and binding with and for and including MS wire (annealed) not less than 0.9mm dia.

All as per the description of srl item No.41 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for reinforcement cement concrete type B-1 1:2:4 (20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings and in shelves and the like.

M&L for reinforcement cement concrete type B-1 1:2:4 (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc complete all as specified.

S&F in PVC (SWR) bends any radius bore 75 mm.

S&F cast iron 75mm nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F in 100mm dia of ptmt (minimum weight 25 gms) grating round shape fixed over floor trap with coloured cement all as directed

S&F vitreous china urinal, half stall type, white (back wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms)

S&F CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge Make Jaquar (AKP-35731P) or Prayag Cat Part No BA - 25.

S&F 20 mm dia aluminium anodised CP towel rail 600mm all as specified and directed by Engr in Charge (Cat. No. 7781) (Make :- Jaguar).

S&F 20mm dia Ball valves high pressure of PTMT with epoxy oatedAluminium rod & high density plastic ball screwed for iron pipeand fixed. (Minimumweight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) ®

S&F 15mm dia Stop valves, cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for ironpipe or forunions and fixed

Supply only Liquid integral water proofing compound complete all as specified and as directed.Make: FOSROC.

M&L for APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application and including 15 mm thick cement scrred bed in CM 1:4 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering, and removing surplus soil to a distance n exc 50 m and making good surface in Soft/Loose Soil.

S&F steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes confirming to I.S.1161-1998 grade St-240 complete all as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with Grey cement and pigment complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consoilidation complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in benching and coping of manholes etc including necessary form work, complete all as specified and as directed by Engineer-in-Charge.

M&L Viterified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed.

Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,window-cills, cooking platform and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 15 mm thick bedding layer in cement mortar 1:6 as in cooking platform complete all as specified and directed.

Dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed.

Taking down cement plaster on brick/stone walls etc any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n.exc 4 sqm each and removing to store complete all as specified.

Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified..

Taking down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified..

S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc. Note - The unit rate quoted by contractor includes cost of glass, wire mesh and all other connected accessories , complete all as specified and directed. .

Please Enable Macros to View BoQ information