MAINT OF WS, ES INSTALLATION IN RAKHMUTHI AND WS INSTALLATION IN PALLANWALA MIL STN UNDER GE SOUTH AKHNOOR.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed .

Dismantling wrought iron or mild steel work/ structural steel work of any description not otherwise provided for ,complete all specified and directed.

Dismantling asbestos cement corrugated,semi-corrugated ,etc roof coverings including ridge ,complete all specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles ,complete all specified and directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6,complete all specified and directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, but except bricks,complete all specified and directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.,complete all specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed .

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws ,complete all specified and directed.

Providing and fixing ceiling board of 4mm thick, designer, in ceiling fixed as per manufacturer’s instructions, including powder coated galvanised iron snap grid frame work of main and tee (weight not less than 240gm/Rm), angle (weight not less than 217 gm/Rm), grid size 595x595mm, for false ceiling all as specified, and hangers not less than 3mm nominal dia, galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron wire of 2.0mm dia, length as required at site and expansion hold fasteners 12.50mm dia, 40mm long including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets,complete all specified and directed.

M&L for plain cement concrete 1:3:6, type C-0 using 12.5 mm graded crushed stone aggregates as in hold fasts,copings,filling of pressed steel frame bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork , complete all as specified and as directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to grade Fe 410-W (Gde E-250 quality-A),complete all as specified and directed.

S&F in repair ball valves 20mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed .

S&F Sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410x330x160mm, fixing in repairs, complete all as specified and directed .

M&L for machine cut kota stone slab flooring 16-18 mm thick over 20 mm thick cement mortar 1:6 screed bed laid and jointing with grey cement slurry mixed with pigment including rubbing and mirror polishing complete with machine all as specified as on stair shelves etc, including rounding of edges ,complete all as specified and as directed .

M&L for plain cement concrete 1:2:4, type B-1 using 12.5 mm graded crushed stone aggregates as in hold fasts,copings,filling of pressed steel frame bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork , complete all as specified and as directed.

S&F TMT bars of 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,complete all as specified and as directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,complete all as specified and as directed.

Supply and fixing in repair curtain rod, 20 mm dia stainless steel fixed with brakets,stops,rollers etc , complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base finished even and fair including necessary formwork , complete all as specified and as directed .

S&F in repair chromium plated shower roses with or without swivel joints, 150MM fancy type, fixed for 15mm bore pipe, including fixing to steel pipe or union, complete all as specified and as directed.

S&F CP Brass wall mixer formixing hot & cold water screwed down for iron pipe connecting legs, CP Extension nipple & wall flanges for iron pipe 15mm dia bore fancy type fixed in repair complete all as specified and directed.

S&F in repairs brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipes and fixed in repair, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any size and shape confirming to IS 15658-2006 of 60mm thickness M-35 grade,including 25mm sand cushioning ,complete all as specified and as directed

M&L for 25 mm thick plain cement concrete 1:2:4 type B-2 using 20 mm graded crushed stone aggregates finishing concrete surface even and fair without using extra cement including necessary formwork ,complete all as specified and as directed.

M&L for reinforcement cement concrete(nominal mix) type B-0 1:2:4 (12.5 mm graded stone aggregatge) for Chajjas/ Balcony/ Landing work/kitchen slab etc., complete all as specified and as directed.

M&L for formwork to flat finished surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, chajja, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed .

Supply and fixing in repair PVC (SWR) bends of 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed .

Supply and fixing in repair 110mm bore PVC (SWR) junction double, (double T) equal or unequal,complete all as specified and as directed.

Supply and fixing in repair 110 mm bore PVC (SWR) vent cowl ,complete all as specified and directed.

Supply and fixing in repair 75 mm bore PVC (SWR) vent cowl ,complete all as specified and directed.

Supply and fixing in repair PVC (SWR) 'P' or 'S' trap of 110mm dia outlet, including jointing with solvent cement, complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) pipes, 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, fixed to wall with clamps etc, complete all as specified and as directed .

Supply and fixing in repair PVC (SWR) pipes, 75mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed .

Supply and fixing in repair stainlees steel grating, chromium plated, size 125/150mm,with or without hole heavy duty, complete all as specified and as directed.

Supply and fixing in repair glass shelf assembly consisting of 450mm long sheet glass shelf 100mm wide over WHB with chromium plated bracket guard and railing 60cm long with brackets, complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty not exceeding 0.5Ssqm in each pane including hacking out old broken glass, complete all as specified and as directed.

Supply and fixing in repair 15 mm bore CP bib taps , fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

Supply and fixing in repair stainless steel soap dish, chromium plated, any type, fixed to plugs with screws and , complete all as specified and as directed.

Supply and fixing in repair stainless steel towel rail chromium plated 20mm dia 'D' type 60 cm long between flanges, ISI marked , complete all as specified and as directed.

Supply and fixing in repair 15mm dia angle valve brass chromium plated screwed down, high pressure with crutch or butterfly handle concealed type with long shank cup fixed , complete all as specified and as directed.

S&F in repair stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 20mm bore pipe, complete all as specified and as directed.

M & L for non skid joint free ceramic coloured tiles of size 600x600 mm 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4,complete all specified and directed.

M&L glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles over 10 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work ,complete all as specifed and directed.

M & L for non skid ceramic coloured tiles of size 400x400 mm and 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4.,complete all as specifed and directed.

Supply and fixing in repair vitreous china wash basin, white, flat back, size 550 x 400 mm,including brackets,pillar tap, waste coupling 32 mm bore and PVC waste pipe 32 mm bore and pedastel , complete all as specified and as directed.

Supply and fixing in repair PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32mm dia ,capacity 10 litres and making good to dismantled/ damaged floor/ surfaces, complete all as specified and as directed .

S&F in repair 32mm dia waste pipe for WHB, complete all as specified and as directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. but including concrete bedding layer, complete all as specified and as directed .

S&F in repair vitreous china urinal, half stall, flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern and flush pipe but including waste pipe, CP waste coupling), complete and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe, complete all as specified and as directed.

Supply and fixing in repair 15mm dia angle valve brass chromium plated screwed down, high pressure with crutch or butterfly handle screw both end for iron pipe or union, complete all as specified and as directed.

Supply and fixing in repair low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15 mm bore and fixed, complete all as specified and as directed.

Supply and fixing in repair rotational moulded polyethylene water storage tank of 1000 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 25mm bore pipe , complete all as specified and as directed

Supply and fixing in repair rotational moulded polyethylene water storage tank of 500 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 25mm bore pipe , complete all as specified and as directed.

Taking down chowkat or frame exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames),complete all specified and directed.

Taking down chowkat or frame not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames),complete all specified and directed.

Taking down shutters exceeding 1.00 sqm but not exceeding 2.00 sqm each,complete all specified and directed.

S&F pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. ,complete all specified and directed.

S&F pressed steel frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. ,complete all specified and directed.

S&F 25 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces covered with decorative face veneer with lipping/frame to match,complete all as specified and as directed .

S&F in repair galvanised mild steel wire cloth , 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, , complete all as specified and as directed .

S&F factory made, glazed and skeleton shutters in second class hardwood, 35mm thick, open rebated and prepared to receive glass, gauze etc. in 3 panels) with sash bars, edged of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass including galvanized mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm etc.; sizes of members of shutters as specified in SSR Part-l Section 8 clause 8.24 (a); supplied and fitted to chowkhats, complete all us specified and as directed.

S&F factory made 35 mm thick 2nd class hard wood plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat ,complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing opening as per specification and drawing, including making good disturbed surfaces of wall ,complete all as specified and as directed .

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struk inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointing together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR ,complete all as specified and as directed .

S&F150 mm long Extruded aluminium alloy handle, cast type, anodised ISI marked , complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section ISI marked , complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed , complete all as specified and as directed.

S&F mild steel spring for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed.

S&F floor door stopper 150 mm overall length of cover plate of aluminium alloy body and tongue,anodised,with hard drawn steel spring, ISI marked fixed in bottom body of door complete all as specified and directed.

Supply and fixing in repair health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F powder coated aluminium anodised aluminium door shutter, aluminium section wighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, door seal at bottom, anodised aluminium snap beading screws etc.(thickness of powder coating should not less than 50 micron) complete all as specified and as directed.

M&L for Aluminium Anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Anodised aluminium powder coated (minimum thickness of powder coating 50micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed .

S & F Granite (of any type) work (table rubbed and polished ) 15-18 mm thick ,as in steps,jambs,pillars, window/ventilation -cills,cooking platform,urinal partition and like including screed bed or rendering as required in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edges , complete all as specified and as directed.

S & F Makrana white marble (table rubbed and polished ) 15-18 mm thick ,as in steps,jambs,pillars,window/ventilation -cills,cooking platform,urinal partition and like including screed bed or rendering as required in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edges, complete all as specified and as directed.

M&L for 50mm thick, plain cement concrete M-10(1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight,including necessary formwork , complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over priming plastered and other surfaces with alkalie resistant priming paint , complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of alkali resistant primer over two coats of wall care putty, complete all as specified and as directed

M&L for preparation of newly plastered wall surfaces, applying two coats of emulsion paint (Apex Ultima or Equivalent) over one coat of alkali resistant primer, complete all as specified and as directed .

M&L for complete removal of existing treatment from old plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion including priming the surface with chalk whitening over two coats of wall care putty, complete all as specified and as directed.

M&L for complete removal of existing treatment from old decorated surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10cm width or girth including preparation of new untreated surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth , complete all as specified and as directed.

M&L for preparation of old painted wood/ wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat(finishing coat) of synthetic enamel paint, complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces over 10 cm in width or girth , complete all as specified and as directed.

M&L for complete removal of exiting treatment from old plastered wall surfaces, applying two coats of Emulsion paint (Apex Ultima or Equivalent) over one coat of primer, complete all as specified and as directed .

Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flush pipe but excluding flushing cistern) and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hanging device and making good to dismantled/ damaged floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and as directed .

RAMA CONSTRUCTION COMPANY (BID ID -3492591)

M/S JEEVAN LAL SHARMA (BID ID -3498653)

M/s Cosmos Builder and Developer (BID ID -3492606)