Loading
Loading…
Loading…
Tender Value
₹9.1 Cr
EMD Value
₹6.0 L
Closing Date
15 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 3 needing a document upload
c) Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a) Electrical License: The tenderer/Firm should have valid electrical contractor license on their own name or firm name issued by Electrical licensing board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of License shall be uploaded online failing which offer will be rejected.
b) Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month before the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work: "Supply, installation and commissioning of Solar Lighting /Solar Water Heating System with Solar Panels along with power supply, control and protection arrangements" Or "Supply, installation, testing and commissioning of Solar Power generating system of at least 5 KWp capacity".
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Provision of Solar Panels on COP area of Amrit stations in Nanded Division - Electrical Arrangements.
NED-E-38-2025-26~SCR
NED-E-38-2025-26
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹6.0 L
15 Jan 2026
23 Dec 2025
1 Jan 2026
29 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 9,09,39,577 | ||
| — | 140.00 | — | — | ||
| Supply and fixing of 10 kWp roof top on grid solar plant with MPPT technology with SPV array, Module Mounting Structure, Power Conditioning Unit (PCU) consisting of Maximum Power Point Tracker (MPPT), Inverter (10 kW out put pure sine wave inverter), and Controls and Protections, interconnect cables and switches all complete as per the standard specifications. The PV module shall be procured from the approved list of Manufactures circulated by Ministry of New and Renewable Energy as per latest Lr.No. 283/54 /2018-Grid Solar- Part-I dt.04.05.22. (Proof of purchase from approved manufactures shall be submitted at the time of inspection). The Solar inverter shall be of reputed brands like Lento Industries /Microtek/ Delta/ Sungrow /ABB /Hitachi/Huawei /Sineng/Luminous /Kehua/Power One. | — | — | — | 6,69,78,660 | |
| — | 140.00 | — | — | ||
| Supply and installation of IoT based 3 Phase Industrial Smart Meter that operates over GSM conforming to IS 16444 along with software like Apps, website for monitoring of Energy consumption. | — | — | — | 21,24,080 | |
| — | 24.00 | — | — | ||
| Supply, erection, testing and commissioning of all material, excavation, and casting of cement concrete foundation/ concreting in ratio 1:3:6. | — | — | — | 1,14,384 | |
| — | 5554.00 | — | — | ||
| Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and 1 coat of paint all complete. | — | — | — | 3,61,010 | |
| — | 8.00 | — | — | ||
| Supply, installation, testing & commissioning of Three Phase HT Net Metering of various capacity solar plant including Meter Set (Both Solar Meter and Net Meter) and Meter Box inclusive of all Discom Fees i.e. Registration Fees, feasibility Fees, Testing Fees and all other charges and accessories / panel etc. with HT CT required at site. | — | — | — | 12,21,008 | |
| — | 4398.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 52,776 | |
| — | 6540.00 | — | — | ||
| Supply and laying of 4 core 120 sq mm cross linked poly ethylene (XLPE) insulated LT UG cable, PVC outer sheathed , armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at1100 volts grade and conforming to IS:7098 (Part- 1)/1988 with am dt. no. 1,2 & 3 (reaffirmed 2005) or latest. Make: Polycab/Finecab/Finolex/Havells. | — | — | — | 41,46,360 | |
| — | 4419.00 | — | — | ||
| Supply and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE pipe 110 mm (nearest 4"" dia) and wall thickness minimum 4.1 mm maximum 4.3mm with ""T' joints, bends, elbows etc.including all other connected accessories. Make: M/s.Sudhakar/ Nagarjuna polymer/ Nandi/Plasto. | — | — | — | 13,78,728 | |
| — | 2850.00 | — | — | ||
| Cutting of esphated road/ concrete/cement/under the track etc., and excavation of cable trench 30 cm wide x 90 cm deep road etc., for laying of HT /LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/cement as per the site conditions and as per directions of Rly. Engineer. | — | — | — | 5,78,550 | |
| — | 2620.00 | — | — | ||
| Supply and laying of 4 core 240 sq mm cross linked poly ethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armoured with galvanized round steel wire or steel strip and with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part- 1)/1988 with amdt.no. 1, 2 & 3 (reaffirmed 2005) or latest.Make- Polycab, Finecab, Havells. | — | — | — | 39,35,240 | |
| — | 2080.00 | — | — | ||
| Supply, erection and laying of HDPE (High Density Poly ethylene pipe) pipe of PE-80 Grade in PN- 4 outer dia of HDPE pipe 160 mm (nearest 6" dia) and wall thickness minimum 6.2 mm maximum 7.1 mm with joints, bens, elbows etc. including all other connected accessories. Make: M/s.Sudhakar/Nagarjuna polymer/Nandi/Plasto. | — | — | — | 13,20,800 | |
| — | 1502.00 | — | — | ||
| Supply, laying, erecting, connecting, testing and commissioning of 4 core 70 mm² LT XLPE UG Aluminum Cable, 1100 Volts as per IS:7098/Pt. I/1988 or latest make:Polycab/Havells/Finecab. | — | — | — | 4,71,628 | |
| — | 8285.00 | — | — | ||
| Design, Fabrication, supply, installing and fixing of 300 mm width, 62.5 mm depth, 2mm thick sizes perforated G.I tray (cable Tray) including Horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I.Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc. | — | — | — | 79,61,885 | |
| — | 12.00 | — | — | ||
| Supply and fixing of A4 Multi-Function Laser Printer (B/W) cum Scanner of specification as per Annexure-1 Accepted make/brand: Canon, Epson etc. with a warranty period : 30 months. | — | — | — | 2,94,468 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .