Attending repair works, face lifting and replacing Air Conditioners and Electrical fixtures at Government Tourist Home, Kovilpathu, Karaikal.

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Brick work with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1cement : 6 coarse sand)

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. - Raj Nagar plain white marble / Udaipur green marble / Zebra black marble - Area of slab over 0.5 sqm

Extra for providing opening of required size and shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar locations in marble / granite / stones work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Mirror polishing on marble work / granite work / stone work wherever required to give high gloss finish complete.

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. - 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.Piano hinges IS : 3818 marked with necessary screws

Extra for providing and fixing flush doors with decorative veneering on one side in item no.9.21

Providing and fixing 18mm thick ,150mm wide pelmet of coir veneer board ISI marked IS : 14842 - 2000 , including top cover of 6mm coir veneer board, nickel plated M.S. pipe 20mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S.flat 10cm long and rawl plug 50mm long (designation 10 no) etc.,all complete

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P.brass screws and wooden plugs, etc., wherever necessary complete: - 25mm dia

Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm - with Burma teak wood beading 62x19mm

Providing and fixing powder coating.safety chain with necessary fixtures for doors. (weighing not less than 450 gms)

Providing and fixing IS:3564 make aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete

Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) aluminium lever handles with necessary screws etc.complete (best make of approved quality)

Steel work welded in built up section/ framed work including cutting hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Coupler 110mm.

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with door 110X110X110mm.

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe.

Providing and fixing unplasticised - PVC clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

12 mm cement plaster of mix - 1:5 (1 cement : 5 fine sand)

15mm cement plaster on the rough side of single or half brick wall of mix 1:5 (1 cement : 5 fine sand)

Providing and applying ready mixed wall putty (JK / BIRLA ) of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of cement primer of approved brand and manufacture on wall surface - Cement primer

Wall painting with plastic emulsion paint - Royal of approved brand and manufacture to give an even shade - two or more coats on new work

Providing and fixing bright finished brass hard drawn hooks and eyes - 150mm

White washing with lime to give an even shade - Old work (two or more coats).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Wall painting with plastic emulsion paint - Royal of approved brand and manufacture to give an even shade - One or more coats on old work

Wall painting with plastic emulsion paint - Premium of approved brand and manufacture to give an even shade - One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Varnishing with varnish of approved brand and manufacture - One or more coats with copal varnish

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead - For thickness of tiles above 10mm and upto 25mm.

Cement concrete 1:2:4 (1cement : 2coarse sand : 4 graded stone aggregate 40mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

Supplying fixing and commisioning of Suguna / Texmo / Sharp 2HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete .

Acid cleaning for the existing Mosaic floors, glazed tiles work and removing the stains and decays to give a glassy look etc complete (The acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Applying two coats of cement based polymer modified bonding admixture (FOSROC or equivalent) over the existing RCC members after removing the plastering and cleaning the concrete surfaces and saturated with clean water. The cost including all materials labour charges.

Supply and fixing of sliding windows at all levels made out from Unplasticised Poly vinyl chloride frame (UPVC) of natural colour (PRISTINE WHITE) with outer frame of size 40x56x40mm / 102x56x40mm and for shutter frame of size 53x38x37mm for two track / three track sliding windows , with wall thickness of 1.8mm (+/-0.3mm).The section should be single glazing using (flush catch) single point locking. The gasket should be made of EPDM (Ethylene propylene dimonomer) and applying silicone sealants (GE make or wacker make) outside and acrylic sealent inside including single glazing of 5mm thick clear float glass. The sections should be reinforced with GI sheet of 1.5mm thick with suitable drainage grouting.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on wall) - 25mm nominal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on wall) - 32mm nominal outer dia pipes

Providing and fixing on wall /column face unplasticed - PVC soil and waste pipes (type-B) conforming to IS:13592-1992 including jointing with seal ring conformation to IS: 5382 leaving 10mm gap for thermal expansion - single socketed pipes 110mm diameter

Providing and fixing on wall face/column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm

Providing and fixing on wall face/column face unplasticised - PVC moulde fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - bend 110mm

Supplying and fixing of Stepped type modular Fan Regulator on the existing modular plate and switch box including connections but excluding modular plate as required.Make: Legrand- Mosaic /ABB:-

Installation testing and commissioning of ceiling fan/wall mounting fan and wiring the down rod of standard length .(upto 30cm) with 14/.86mm Plastic insulated twisted Copper wire including earthing as required:

Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing, commission as required.

40W tube light. Make: Philips

9W / 10W / 11W CFL lamp for Pin type. Make: Philips

1200mm sweep double ball bearing ceiling fan. Make:Almonard/Usha

300mm 1400 rpm heavy duty exhaust fan. Make: Almonard/ Orient/Usha

Supply of voltage stabilizer of 230Volts, 50 HZ 4 KVA voltage stabilizer Make: Everest (Wall mounting type working range shall be 170 V to 270 V to give the out put voltage of range 190V to 240 V with bucking and boosting and shall have build in time delay of 3 minutes 20Sec. from resumption of power supply and dual relay for increasing / decreasing voltage start facility when the voltage decreasing / directed by the Engineer-in-charge.

Supply of copper pipe 1/2" softener copper pipe 2mm thick for ssuction and delivery.

Supply of powder coated MS stand with the necessary screw/Bolts and nuts weighing not less than 2.50kg capable of holding the outdoor unit for fixing outdoor unit.

SWAMINATHAN S

ANBALAGAN G

ARUMUGAM M