Construction of toilet near Govt College Sanjauli adjoining Bye pass road junction in ward No 19 (SH Civil and finishing work) under Shimla Smart City Mission

Amount

Cutting work in earth work in all kind of soils i.e. spade work ,pick work, jumper work , soft rock, Hard rock work upto all heights and depth and disoposal of excavated earth upto all leads and lifts and designated dumping site of local bodies as directed by the Engineer incharge. Retaining wall basement & ground floor

Excavation in foundations, trenches etc, in earth work, such as spade work, pick work and jumper work including hard /soft rock lift upto 1.50 Metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth designated dumping site to all leads and lifts. ( No extra will be paid) Retaining wall

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batterns and ballies, height of the propping and centreing below supporting floor to ceiling not eexceeding 4mtrs.and removal of the same for insitu-reinforced concrete & plain concrete including carriage of material upto all leads and lifts: Foundations, footings, bases of columns and mass concrete.

Flat Surfaces such as soffit of suspended floor , roofs landings and the like floor etc. up to 200 mm in thickness. wash basin counter

Vertical Surfaces such as walls (any thickness) parrtitions and the like including atached pilasters butteressplinth and string cources and the like. Retaining Wall below extended portion

Columns / pillars, posts and struts square, rectangular or polygonal in plan

Beams, cantilevers, gurders / lintels sides and soffits of beams beam hounchings cantilivers, bressumers and lintels not exceeding 1.00 m in depth in all height in floor.

Stair cases with sloping or stepped soffits excluding landing etc.

Edges of slabs and breaks in floors and walls

Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) and curing complete including all leads and lifts excluding cost of form work in: Foundation and plinth

Providing and laying cement concrete 1:4:8 (1cement:4sand:8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinths including carriage of materials in all lead and lifts.

Providing and laying cement concrete 1:6:12 (1cement: 6sand :12graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinths including carriage of materials in all leads and lifts.

Providing and laying cement concrete 1:5;10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm. to 300mm. as per H.P.P.W.D.Specification.

Providing and laying RCC M :20 mix design (1:1.5:3) as per IS-10262- 2009 and curing complete excluding cost of form work and reinforcement upto all heights including carriage of material upto leads and lifts: Foundation and plinth.

Columns, pillars, posts and struts in square,rectangular or polgonal in plan

Suspended Floor roofs, landing and shelves and and their support balconies, beams girders, bressumers and cantilever up to all floor levels

Providing mild steel /tor steel reinforcement (TATA MAKE TMT Fe 500 make or equivelent ) for RCC work including bending, binding and placing in position complete including carriage of material in all leads and lifts and as per direciton of Engineer Incharge. Tor Steel

Brick work using coomon brunt building brick in cement mortar 1: 4)

Half brick masonry in common burnt clay building bricks 2nd class in superstructure in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads, lifts and upto all heights.

Stone soling properly hand packed filling interstices with kharanja stone and consolidating to the required gradient and camber and rolling of binding materials moorum or earth etc. including carriage of materials in all leads and lifts.

Stone filling behind retaining walls

Providing sal wood frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position 2nd class kail wood.

Providing and fixing 40 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of material upto all leads and lifts and as per direction of Engineer incharge. First Class Deodar wood.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary: 5.5 m thick glass.

Providing and fixing 35MM wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows and clerestory enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts.2nd class Deodar wood.

Providing and fixing 40mm thick including black enamelled M.S. butt hinges flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak plyveneering with vertical grains or cross bends and face vencering on both faces of shutter.

Providing and fixing plain particle board ceiling of approved quality with butt jointing and nails upto all heights(frame work cover fillets to be paid for separately) including carriage of materials within all leads and lifts. 6mm thick Cement bonded Particle board.

Providing and fixing 40x3 mm flat iron hold fast 40 Cm. long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 (1cement:3sand:6graded stone aggregate of 20 mm nominal size including carriage of materials in all lead, lift and height. Total Door /Windows

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. as per detailed dtawings / directions of Engineer in Charge. 125mm

100 mm Dia

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. including crriage of material upto all leads and lifts complete as per detailed dtawings / directions of Engineer in Charge. Door Tower bolts 150X10MM

Toilet Window/ Ventilator 100x10 MM

Providing and fixing bright finish hard drawn hook and eyes, 200 mm size (I.S.I. make) Heavy duty including carriage of materials Window Shutter

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nutse including carriage of materials in all leads and lifts 250x16mm toilet door

Providing and fixing of Stainless Steel (Grade 304 with Brush Finish) Staircase Railing as per details drawing of KICH make Top mounted square baluster system with Horizontal Members (model no. DT31-1-163) with top brackets, middle member connector, mounting system, base fitted with cover cap, top railing pipe is od 50mmx50mm square and three nos of middle pipes of 38mm dia pipes and anchouring to grainate steps, chemical grouting of bolts and all fittings including all members and labour as directed by the engineer in charge. The top of the railing pipe is of 50mm dia including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete.

Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.

Providing and laying Coloured glazed (600x300mm) in required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing and laying flamed granite stone ( light grey / Ruby Red or approved colour ) in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. 20mm.thick (Basic rate not less than 300.00 Per Sqft.)

Providing and fixing 0.60 mm thick prepainted steel sheet (Tata Make) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mocrons over 5 microns primer coating including fixing with self driven steel screws / prepainted iron J or L hooks or seam bolts with prepainted limpet and rubber washers complete with all accesoriees as required as per the detailed drawings including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing withhot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, or seam bolts /driled screw & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge

Providing and fixing valleys 60 cm overall with 0.60mm thick prepainted steel sheets in roofing withhot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, or seam bolts /driled screw & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material upto all leads and lifts and as per direction of Engineer in charge

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design.0.80 mm thick

Providing and fixing flashing 38 cm overall with 0.60 mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter & prepainted G.I. limpet & bitumen washer completed with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials in all lead, lift and height (Tata/Century wells make).

Providing and fixing rolled cold M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)

Providing and fixing on wall faces PVC (D- plast for rain water pipes of working pressure not less than 4.5 Kg/ Sqmtr. including filling the joints with approved adhesive complete.

Providing and fixing on wall faces PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete. a) 100 mm dia plain bend

Providing and fixing PVC hold bat clamp including steel bolt to SCI pipes embedded in and including cement concrete block 100 mm x 100 mm x 100 mm of 1:2:4 (1cement: 2sand: 4 graded stone aggregate) including carriage of materials in all lead and lifts. a) 100 mm nominal dia

Steel work welded in built up sections, / trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material upto all leads and lifts and as per direction of Engineer incharge. In trusses and trussed purling in buildings.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Applying priming coat on new concrete/masonry/ asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters and sand papering as required with ready mix primer including carriage of materials in all leads, lifts and heights.

Applying priming coat of standard brand/quality over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand, papering and knotting including carriage of materials in all lead and lifts.: With Ready mixed pink primer

Painting two coats with standard brand/quality (excluding priming coat) on new wood and wood based surfaces, with enamel paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matters sand papering and stopping and carriage of materials upto all lead, lifts and height. a) Enamel paint other then white.

20 mm th. Cement Plaster in single coat on brick bat coba as per detailed drawings / instructions of Architect / Engineer in charge at site for exterior plastering upto all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mmin girth and finished even and smooth in cement mortar 1:6 (1cement : 6 fine sand) including curing and carriage of materials to all leads, lifts and scaffoldings etc. complete in all respects.

15 mm cement plaster in single coat on fair /rough side of brick/concrete/stone walls for interior plastering upto floor two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) above floor two and above floor two levelincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.

6mm thick Cement plaster to ceiling including sides and bottom of beams, soffits of stairs, ramps etc. with cement mortar 1:3 (1cement : 3 fine Sand) including curing and carriage, leads of all kinds of materials and scaffoldings etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) including carriage of material in all lead and lifts

Providing under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of material in all lead and lifts

Constructing course rubble hammer dressed “U” shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1cement:6sand) and inside plastering with cement plaster 1:3 (1cement:3sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1cement:5sand:10 graded stone aggregate) of 40 mm nominal size and 7.5 cm cement concrete 1:2:4 (1cement :2sand:3 graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials in all leads and lifts.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- Angle Indian Universal closet

Providing and fixing 10.0/12.50/15.00 litres vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately).

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover

Providing and fixing vitreous China water closet Cera Make Cat No. s3010102 squatting pan or equivalent (Indian type WC. pan) size 580 mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials up to all leads and lifts and as per direction of Engineer in charge. a) Orissa Pattern, Star white

Providing and fixing vitreous China wash basin of size 550mmx400mm with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:-t including carriage of materials up to all leads and lifts and as per direction of Engineer in charge.

Providing and fixing 15 mm nominal size Basin Mixer with 450mm braided connection pipe including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

Providing and fixing vitreous China bowl pattern urinal Flat back type of size 430mm x 260 including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing 100mm pipes P or S Trap for water closet Sand Cast iron including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing 32 mm diaC.P. Bottle Trap for wash basin and sinkt including carriage of material upto all leads and lifts and as per the direction of Engineer -in-charge

Providing and fixing 32 mm CP Waste for wash basin including carriage of material upto all leads and lifts and as per the direction of Engineer -in-charge

Providing and fixing 600 mm long C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including carriage of material upto all leads and lifts and as per direction of Engineer incharge

Providing and fixing chromium plated brass Small (160mm size) soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of material to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing C.P. Paper Holder t including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing CP brass 15mm dia long nose bib tap with capstan head 15mm dia (Cera make Cat No. F1014151) or equivalent with wall flange and areator including carriage of material to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing 15mm nominal size CP brass angle valve/ Stop Cock Cera Make Cat No. F1014201 or equivalent with flange including carriage of material to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing 100mm dia C.P. Grating including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing PVC connections pipe with brass unions 45cm length 15 mm nominal bore including carriage of material in all leads and lifts

Providing and fixing M.I. Union (ISI Mark) including carriage of material up to all leads and lifts and as per direction of Engineer incharge. i) 15 mm dia

Providing and fixing brass full way valve with wheel including carriage of material up to all leads and lifts and as per direction of Engineer incharge. a) With water storage 15mm size

Constructing manhole with RCC top slab in 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate ) 20mm nominal size foundation concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished with afloating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testingincluding carriage of material in all leads and lifts. a) Inside size 800x800x500mm deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm integral dimensions total weight of cover and frame to be not less than 38 kgs (weight of cover 23kg and weight of frame 15 kg with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3 sand)including carriage of material in all leads and lifts.

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:6 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:6 (1 cement : 6 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium Grade) tube fitting and clamps as per IS code including making good the wall ceiling and floor including carriage of material in all leads and lifts.. a) 15mm nominal size

b) 20mm nominal size

Providing and fixing in tranches galvanized mild steel tubes (Medium Grade) as per IS Code tube fitting exacavation for tranches will be measured and paid saprately including carriage of material up to all leads and lifts and as per direction of Engineer incharge. Jindal/Tata make or equivalent. a) 15mm dia

Providing and fixing 150 mm X 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. 150mm dia

Providing and fixing 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive complete a) 75 mm nominal size

b) 110mm nominal size

Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. complete. a) Plain bend i) 75mm dia

ii) 100mm dia

b) Door bend i) 75mm dia

ii) 100mm dia

c) Single equal junction of i) 75 mm dia

ii) 100 mm dia

d) Pvc Collar i) 75 mm dia

ii) 110 mm dia

e)Pvc Cowl i) 75 mm

f) Tee i) 75 mm

g)Clamps i) 75 mm

ii) 100 mm dia

Providing and fixing PVC floor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors 75 mm niminal diameter (100mm)

Supplying in cast iron cover with frame for man holes for frame of internal dimension 460x610mm rectanguler CI cover (light duty single sear pattern -I)the weight of vocer to be not less than 23 Kg including carriage of material upto all leads and lifts and as per direction of Engineer incharge

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground levelt. 2000 ltrs.

SANJEEV KUMAR