S.I.T.C of Air Conditioner Machines

Amount

HIWALL SPLIT AIR CONDITIONING Supply & Delivery of Hi-wall Split Air Conditioner having following specification. Cooling Capacity(KCal/Hr) - 6000 KCal/Hr ISEER Rating - 3 Star/2018-2019 as per BEE/BIS IS compliance - IS 1391 Refrigerant - R410A / R32 Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above Power Supply - 240V,50Hz ( +Tolerrance as per applicable standard) [Make: Mitsubishi Electric / General / Toshiba / Zamil]

Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including S&F of necessary fixing arrangement for indoor and outdoor unit, duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc as per direction of the EIC. The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLSZH type - Make : Finolex / Havells / Polycab / RR Kable / Gloster) - 3mtr

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines.

(i) Supply & Fixing of extra refrigerant pipe with insulation foam insulation (as requisite dia)

(ii) 3 core required size PVC insulated FRLSZH grade copper cable (Make : Finolex / Havells / Polycab)

Supply & Fixing of PVC drain pipe 1" dia (Make approved by EIC)

SUPPLY and delivery of 7.5TR capacity concealed type Split Air Conditioner of rated cooling capacity of 90000 BTU/hr. with 3Nos. twin rotary compressor,3nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-400V-3ph-50Hz. Air-flow/per IDU:- 1000CFM. (Make: Hitachi / Daikin / O General)[ Principal Room, Morque Seminar Room]

Erection & Commissioning Charges for minimum 7.5TR Air Conditioner

S&F of additional following items for complete installation and commissioning of aboove AC machines.

(i) Supply & Fixing of extra refrigerant pipe with insulation foam insulation (as requisite dia)

(ii) 4 core required size PVC insulated FRLSZH grade copper cable (Make : Finolex / Havells / Polycab)( required size)

Supply & Fixing of PVC drain pipe 1" dia (make approved by EIC)

Supply and fixing flexible canvass connection for Ductable & Concealed Split air-conditioners.

Supplying, fitting & fixing in position suspended false ceilling with frame work of aluminium hollow section of Size - 75 mm X 25 mm ( 3.0 mm thickness) combined with 38 mm aluminium composit panels (ACP). Interior grade of thickness 25 mm X 25 mm having size & 600 mm X 600 mm ceiling with corners. Suspended by aluminium hollow tube section of Size aluminium 3.00 mm comprising of protective flim, polyester coating. Finally service as per manufacture specification finished with aluminium screw and silicon sealent complete in all respect including all incidental charges etc. as per direction of E.I.C. (ACP make Aludecor / Armstrong).

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of 7.5TR Ductable & Concealed split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform .The platform should be baricaded & safe for ODU Maintenance. Area of the platform is as per Machine configuration & load with adequate service access as per direction of EIC (for single ODU unit)

Supply and fixing of Al powder coated continuous Grill (Make- Premier).

Supply and fixing 240V, 25A, 3pin modular type plug top with indicator (Anchor / North West) and necessary connection .

NOTE Special Terms & Conditions :- i) The Agency must procure the materials from the Manufacturer / OEM or from their authorized. Sales channel so that the standard warranty / Support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them ii) Documents that authenticates such procurement form the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill. iii) If any refurbished material is supplied and installed, panel action will be taken as per e

Lyric International

ROY REFRIGERATION

JASODA REFRIGERATOR SERVICING CENTRE