REPAIR AND MAINT OF EXTERNAL WATER SUPPLY PUMPS MOTORS ETC AND OTHER CONNECTED WORKS AT JINDRAH UNDER GE ARMY DHAR ROAD

Amount

Excavation in trenches in hard dense soil n. exc 1.50 mtr wide and n.exc 1.50 mtr in depth for foundation for laying of pipes complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm each layers complete all as specified and as directed.

Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 mtr cumic metre above the starting point complete all as specified and as directed.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 30 cm in depth for passing of pipe line and making good of disturbed surface to match with the existing surfaces by using new material i.e bitumen, aggregate complete incl compaction of cutting portion and making good all as specified and directed.

Taking out GI water tubing lines 150mm bore and connected unserviceable fittings from trench/under road /under PCC path etc complete all as specified and as directed.

all as per item No: 05 here in before but 100 mm bore

all as per item No: 05 here in before but 80 mm bore

all as per item No: 05 here in before but 50 mm bore

all as per item No: 05 here in before but 40 mm bore

all as per item No: 05 here in before but 25 mm bore

all as per item No: 05 here in before but 20 mm bore

all as per item No: 05 here in before but 15 mm bore

Supply, laying, connecting & testing of 150mm bore steel water tubing galvanized medium grade with all fittings & fixtures (ISI marked) laid in trenches or Roads/fixed along walls or in any position complete all as specified and as directed for the following sizes:-

all as per item No: 13 here in before but 100 mm bore

all as per item No: 13 here in before but 80 mm bore

all as per item No: 13 here in before but 50 mm bore

all as per item No: 13 here in before but 40 mm bore

all as per item No: 13 here in before but 25 mm bore

all as per item No: 13 here in before but 20 mm bore

all as per item No: 13 here in before but 15 mm bore

Taking out/relaying the pipe line of size 15mm to 150 mm dia bore from trenches, wall , suface for repair and rectify the leakage from pipe line including necessary T&P for cutting/threading welding of pipe line in any situation for making leakage proof all as directed Note - (i) Excavation earth work (ii) Fittings for repair such as elbow,union,socket, tee, nipple,flange,Gasket ,nuts,bolt etc included in this quoted rate (iii) Welding machine,welding rods,DG Set and manpower required for this job is included in quoted rate (iv) The repair work carried out all as per direction of Engr-In- Charge

S&F in replacement of Gun-metal, globe or gate valves 50 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

all as per item No: 22 here in before but 40 mm bore

all as per item No: 22 here in before but 25 mm bore

all as per item No: 22 here in before but 20 mm bore

all as per item No: 22 here in before but 15 mm bore

S&F as in repair brass spindle, with spindle nuts brass ring, nuts gland packing and its suitable for connecting properly in base plate etc of existing sluice valves of 150 mm bore complete all as specified and as directed

All as per item No 27 of above but 100 mm bore sluice valve.

All as per item No 27 of above but 80 mm bore sluice valve .

M&L construction of brick masonery valve pits of size 900mmx 900mmx1050mm internal diamension with brick work in cement mortar (1:4) including excavation and earth work, concrete work 3mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete and all as directed and including demolition of existing damaged valve pit and removing all as specified and as directed.

All as per item No 30 of above but 1200mmx1200mmx1200mm size.

Meterial and labour for cement concrete in foundations for pole or any other work type D2 1:4:8 with 40 mm graded crushed stone aggregate all as directed.

Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm gradedcrushed stone aggregate all as directed

Meterial and labour for cement concrete in foundations for pole coping or any other work type B1 1:2:4 with 20mm graded crushed stone aggregate all as directed

S&F in replacement of double flanged sluice valve of size 50 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet nut, bolts and washers complete all as directed.

All as per item No 35 of above but 80 mm bore.

All as per item No 35 of above but 100 mm bore

All as per item No 35 of above but 150 mm bore

S&F in replacement of double flanged Non return valve of size 150 mm bore including replacement of worn out rubbersheet nut, bolts and washers complete.

All as per item No 39 of above but 100 mm bore.

Taking out unserviceable Air release valve of 150 mm bore with all fitting and S&F air release valve of size 150 mm complete with air outlets fixed with nuts bolts and packing material for GI water mains of 150 mm bore flanged pipe complete all as specified and as directed .

All as per Sl Item No- 41 but 100mm bore

All as per Sl Item No- 41 but 80mm bore

M&L for existing old painted surface upto 150mm of GI pipe of suction,delivery, header ,flange ,channels, angle etc by brooming down with steel wire brushing,scraping down the corroded GI pipe and applying new painting as per existing colour with written a letter suction,delivery line incl direction of flow (arrow mark) with two coat of synthetic enamel paint over a coat of red oxide for all pump House of AGE (E/M) Jindrah complete all as directed.

Material and Labour for collecting water sample from Filtration Plant, packing it safely in sterlized bottles as required quantity and send it to approved govt laboratory test lab or other approved labs for testing of portable water/raw water as per IS10500 with following parameters colour,odour,turbidity,conductivity,TDS,PH,alkalinity,hardness,calcium,magnessium, iron,manganese,ammonia,nitrate,nitrite,chloride,fluoride,sulphite,phosphate,silica,free chlorine and special element tests all directed by Engr -In- Charge .Note: Tpt for this item is included in this quoted rate.No extra payment will be made for it.

S&F in replacement of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M& L for preparation & Painting new steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primers for surfaces exc 10 cm width or grith complete all as specified and directed.

Demolition of brick/work or stone/boulder masonary,built in lime mortar including quoins arches,pillers et, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Brick work with Sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks disignation 7.5 complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces with water proofing compound complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately

Two coats of cement base paint on old wall and all necessary preparation and wetting and curing, complete all as specified and as directed.

Material and Labour of liquid water proofing compound complete all as specified and directed.

M & L in replacement of Smart i ipro Metal Water level indicator with alarm on tank full with 5 sensor of size 16x7x5cm , inbuilt mechanism to detect/indicate the water level show the percentage 25%,50%,75% and full of Sump/RCC tank complete all as specified and directed.

Supply only Flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 25 Sqmm , ISI marked and connected to pump motor through water tight sealing joints complete all as specified.

All as per item No 54 here in before but 10 sqmm 3 core.

M & L for preventive maintenance of 75 HP motor pump sets by cleaning stator, rotor and servicing of pumpsets by replacing old gland packing, greasing, suitable size of bearings(approved make) etc and rexing the same after servicing complete all as specified and as directed. Note: Bearing, Packing glands & grease etc are included in this quoted rate.

All as per item No.56 above but 50 HP pump set complete all as directed and specified.

All as per item No. 56 above but 40 HP pump set complete all as directed and specified.

All as per item No. 56 above but 30 HP pump set complete all as directed and specified.

All as per item No.56 above but 20 HP pump set complete all as directed.

All as per item No.56 above but 15 HP pump set complete.

All as per item No.56 above but 5 HP pump set complete all as directed.

All as per item No.56 above but 1 HP pump set complete.

S&F in replacement of water pressure gauge upto pressure 1000kg/cm3 for measuring water pressure complete all as specified and directed.

S & F in replacement of 100/150 mm dia bore PVC foot valve with flanged as per IS code standard internals leather/rubber washer,bolt including necessary gasket complete all as specified and directed.

Supply and fix voltmeter digital type 0- 500 volts including taking down unserviceable volt meter all as directed.

Supply and fix Ammeter digital type 0- 200 Amps with necessary CTs 3 nos of range 100/5 including taking down unserviceable Ammeter all as directed.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and shifting the same to approved workshop for repair/rewinding and replacement of burnt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 50 HP from Ghandeerah pump house complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of burnt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 15 to 75 HP from Post 12 Pump house and Booster plant complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of burnt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 30HP from Tawi River Pump House complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of burnt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 5 HP from Shed No 103 and Shed No 118 AC Plant complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of brunt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 10 HP from Bansoo Pump House and Tawi River Pump House Plant complete all as specified and directed by Engr -in- Charge. Note for (item 68 to 72) :- (a) Rewinding of motor will be measured and paid separately under relevent item. (b) The motor shall be squirrel cage induction/slipring induction motor. (c) The contractor shall reinstall the motor within one week after handing over for repairs failing which a penalty @ Rs. 1000/- per day of delay will be charged from the contractor. (d) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of motor duly functional and testing at its original location/position complete all as specified and directed. (e) Replacement of unserviceable bearings and greasing them completely. Bearing shall shall be measured and paid separately. (f) Motor shall be dismantled at workshop in presence of JE concern and inspected by the Engineer -in-Charge. A repair note shall be prepared by the contractor which shall be signed by contractor, JE, EIC and counter signed by GE. Winding cut shall be made in presence of EIC.

Taking down unsv motor rotor with super enamelled copper winding wire/strip as per existing size and turns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity 75 to 40 HP complete all as specified and directed by Engr-in-Charge.

Removal of winding the motor rotor with super enamelled copper winding wire/strip as per existing size and truns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity 30 to 15 HP complete all as specified and directed by Engr-in-Charge.

Removal of winding the motor rotor with super enamelled copper winding wire/strip as per existing size and truns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity 10 to 5 HP complete all as specified and directed by Engr-in-Charge.Note:-(74 to 76) :- (a) Winding cut shall be made in presence of EIC and reassembling shall be done after inspection by the EIC. (b) Rewinding wire of motor will be measured and paid separately under relevent item. (c) The motor shall be squirrel cage induction/slipring induction motor.

M&L copper for Rewinding the motor stator with super enamelled copper winding wire of existing size and gauge and truns etc including all the insulating materials i.e varnish with suppr high quality of cotton tape, insulating paper and other misc items of motor any capacity all as specified and directed by Engr-in-Charge.

M&L for cleaning of semi under ground sump by scraping/removing all funges, scales, dust, sludge etc from inside of the semi under ground tank and depositing the same to a distance exc 50 mtrs and n.exc. 100 mtrs including washing the walls & bottom of the over head tank with water and disinfection chemical such as bleaching powder etc and writing date of cleaning, with synthetic enamel black/white paint complete for upto 100000 gallons capacity complete all as specified and directed. (Kali Mata tank)

M&L for cleaning of under ground sump by scraping/removing all funges, scales, dust, sludge etc from inside of tank and depositing the same to a distance exc 50 mtrs and n.exc. 100 mtrs including washing the walls & bottom of the over head tank with water and disinfection chemical such as bleaching powder etc and writing date of cleaning, with synthetic enamel black/white paint complete for 40000 Ltrs capacity complete all as specified and directed. (Gandira)

All as per item No 78 above but of capacity 35000 ltr (Location -Gandira water point)

All as per item No 78 above but of capacity 10000 Ltrs (Location Tawi river Pump House)

All as per item No 78 above but of capacity 5000 Ltrs (Location Bansoo Pump House)

All as per item No 78 above but of capacity 50000 Ltrs (Location Post No-12 pump house

All as per item No 78 above but of Collection tank capacity 50000 Ltrs (Location- Post no -12 Pump House )

All as per item No 78 above but of collection tank capacity 30000 Ltrs (Location- Post no -12 Pump House )

All as per item No 78 above but of capacity 1,25,000 Ltrs (Location-Booster pump house)

All as per item No 78 above but of capacity 1,12,500 Ltrs (Location-Booster pump house)

All as per item No 78 above but of capacity 2,25,000 Ltrs (Location-Booster pump house clearifluctor tank)

All as per item No 78 above but of SMC Tank capacity 50000 Ltrs (Location-Bansoo pump and Ghandira Terra Top)

All as per item No 78 above but of SMC Tank capacity 30000 Ltrs (Location-Ghandira Terra Top)

All as per item No 78 above but of PVC Tank capacity 10000 Ltrs (Location- Ghandira Terra Top)

All as per item No 78 above but of Alum Chamber and Vessel Chamber (Location- Clarifoculator tank Booster)

Scrapping and Preparation and painting of surface of sluice valve/Air valve/NRV any size 50 mm to 150 mm bore and applying one coat of synthetic enamel paint of black colour complete all as specified and directed by Engr-in-Charge

Supply and fixing star rubber coupling as per site requirement

Supply and fixing Pump seal as per site requirement.

Supply and fixing bearing sleeves as per site requirement.

Supply and fixing Round rubber coupling no 14-8 as per site requirement

Overhauling and repairing and servicing for Impeller of suitable existing size made of brass/CI complete all as specified and directed at site by engr-in-charge.

Supply and fix in repairs gland bushing made of stainless steel suitable for 50 to 75 HP pump set, type-centrifugal etc complete all as specified and directed.

Supply and fix in repairs gland bushing made of stainless steel suitable for 40 to 30 HP pump set, ttype-centrifugal etc complete all as specified and directed.

Supply and fix in repairs gland bushing made of stainless steel suitable for 20 to 10 HP pump set ,type-centrifugal etc complete all as specified and directed.

Repair and Maint of Automatinc star delta starter, decarbonised of all contacts, relay,thimbles etc and cleaning, making good, tightning of all cables, wires and other connected items oiling in moving macnisiam etc incl replacement of burnt parts as requirment basis all as specified and directed for 75 starter complete all as specified and directed .

Repair and Maint of Automatinc star delta starter, decarbonised of all contacts, relay,thimbles etc and cleaning, making good, tightning of all cables, wires and other connected items oiling in moving macnisiam etc incl replacement of burnt parts as requirment basis all as specified and directed for 50HP starter complete all as specified and directed .

Repair and Maint of Automatinc star delta starter, decarbonised of all contects, relay,thimbles etc and cleaning, making good, tightning of all cables, wires and other connected items oiling in moving macnisiam etc incl replacement of burnt parts as requirment basis all as specified and directed for 40 to15 HP starter complete all as specified and directed .

Servicing , repairing and over hauling of flaculator including replacement of chain and gear box including oiling greasing and making good as serviceable condition all as specified and directed .

Servicing repairing and over hauling of slip ring for flaculator all as specified and directed.

Painting and Preparation of surface of steel section incl complete moving bridge and structure of clarifloculator tank and applying two coat after rubbing of rusted surface of synthetic enamel paint including marking all sign of requisite colour complete all as specified and directed by Engr-in-Charge

Repairing of clarifloculator rubber pading (wheel), bearing, chain, motor and overhauling complete and cleaning well maintained all as specified and directed Note rubber padding taken seperately

Replacement of rubber padding of clarifloculator all as specified and directed

Painting of pump motor set, pump any capacity/ any size etc of applying two coat of synthetic enamel paint after rubbing of rusted surface including marking all sign of requisite colour complete all as specified and directed by Engr-in-Charge

M&L for cleaning of filter bed of MS tank and replacement of filter bed media from chamber at filteration plant jindrah including draining out muddy water from tank and removing all other foreign material like scales, sludges, slit etc and depositing where directed and cleaning tank by washing soda scrapping internal wall surface of water tank using hair brush and wooden blades , including changing of gravels by removing old utilised gravel complete all as directed by engr-in-charge. Note Gravels will be Paid Separately

Material and labour for Fine Sand Gravel for Filter Bed at Booster Pump House complete all as directed by engr-in-charge.

Supply & Fixing ML - 3 Type three Pole Power contactor having 02 NC & 02 NO auxilary contacts, AC operated of coil voltage 230 Volt, 50 Hz AC 3 rating 40 A, ACI Rating 45A complete all as specified and directed.

Supply & Fixing ML - 4 Type three Pole Power contactor having 02 NC & 02 NO auxilary contacts, AC operated of coil voltage 230 /415 Volt, 50 Hz AC 3 rating 70 A, ACI Rating 100A complete all as directed.

M&L for dismantling the PCC foundation through breaker/Hand Drill/Manually etc incl proper taking down the motor and pump alongwith channel, disconnecting the suction and delivery pipe. Note- PCC will be measured im seperated items

Material and labour for writing SM/MES no/Location etc on Pump and Motor Set, Generator, Header,and Date of cleaning on tank complete all as directed by the Engineer-in-Charge

Material and Labour for cleaning of Drain of (Width 0.5 mtr and Depth 0.8 mtr) from Drain Chamber at Booster to Drain Line near Shed complete all as directed by Engineer in Charge.

Cleaning of Tawi river Point,P-12 Pump House,Booster Plant, Bansoo water point, Gandira water point including clearing of all debries, pipe scaling, plant tree leaves,trimming of branches over bldg/ LT line and other material from water supply installation and deposit beyond Mod land & Cleaning of above ground water tank.T&P will be provided by the contractor which is included in this quoted rate.

S&F of Glow Sign board of following size and showing given name on Acrylic sheet/Fibre glass re-inforced translucent corrugated sheet 2mm thick with MES Logo (symbol) necessary Vinyl Blue Sticker along with 02 No's LED Tube light fitting 20 watts incl nessary connection with 1.5 Sqmm flexible copper wire and fixed on structure with aluminum equal angle as per required size , sufficient Nos brass machine screws with and incl errection complete all as directed.Note:-GI pipe 50 mm bore for errection of glow sign board will be paid separately. GLOW SIGN BOARD SIZE 4.50 m x 0.60m x 0.20m-01 No incl angle iron size 50 x 50 x 6mm length 01 ft –02 Nos grouted in Main entrance Piller with cement plastering or GI Pipe 50mm bore for fixing the glow sign board. MES BOOSTER FILTRATION PLANT AGE (E/M) JINDRAH UNDER GE(ARMY) DHAR ROAD

All as per item No: 118 but size 1.50m x 0.45m x 0.20m-01 No SEDIMENTATION TANK

All as per item No: 118 but size 1.50m x 0.45m x 0.20m-01 No PUMP HOUSE

All as per item No: 118 but size 1.50m x 0.45m x 0.20m-01 No GENERATOR ROOM Note for item No : 118 to 121 (i) Rest of the sides of the structure except front side will be covered with galvanized plain sheet 0.80mm thickness with zinc coating both sides fitted with nut, bolt washer 25mm length 6mm dia (ii) Bottom support:- M&L for angle iron size 50mm x 50mm x 6mm length 08 ft –02 Nos grouted in suitable PCC 1:4:8 type D2 40mm graded platform with cement plastering or fixing on the GI Pipe 50mm bore for fixing the glow sign board all as directed by Engr-in-Charge.(iii) All galvanized plain sheet and equal angle iron painted with 2 coat of synthetic enamel paint over a one coat of red oxide paint as per approved colour included in this quoted rate all as directed by Engr-in-Charge

Supply and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminiumconductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 06 sqmm 2 core complete all as directed.

S & F Rigid non-metallic PVC conduit exclusive 2 mm thick 20 mm dia of boxes junction/terminal) but inclusive of all tees, bends, elbows, educers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. etc complete all as specified and directed.

S & F in replacement of 100 mm dia bore MS foot valve MS flanged as per IS code standard internals leather/rubber washer,bolt including necessary gasket complete all as specified and directed.

All as peritem No: 124 here in before but 80mm bore

Dismantling and Taking out existing unserviceable MS Header and M & L for MS header made out of MS pipe 300 mm dia heavy duty having a length of 7 to 8 mtr inclboth side flanges with 2 Nos flanged tee of size 300x300x150mm, 2 Nos flanged tee of size 300x300x100mm ,3 Nos flanged tee of size 300x300x80mm ,4 Nos flanged tee of size 300x300x50mm, 2 Nos flanged tee of size 300x300x40mm and 1 Nos flanged tee of size 300x300x15mm, including necessary welding work for fixing of existing water supply main line of size 50 to 150mm dia distribution lines on either side of the MS header using suitable size MS reducer(As per site requirement) including making good on disturbed surfaces by applying two coats of synthetic enamel paint over a coat of red oxide primer complete as directed by Engineer-in-Charge

Deduct Schedule of Credit of Rs. (-) 155773.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

SUBASH CHANDER (BID ID -3311227)