PROVN OF KOTA STONE AND FLYPROOFING TO BLDG NO T-14 AND T-16 AT SADILAPUR AND SPECIAL REPAIRS TO UNDER GROUND DRAINAGE SYSTEM AT 240 TRANSIT CAMP UNDER GE GUWAHATI

Amount

Demolition of cement concrete (un reinforced) in ground floors and paving n.exc15 cm thickness (below or above ground level) complete all as directed.

Demolition of cement concrete (un reinforced) of any description and in any position complete all as directed.

Demolition of cement concrete (reinforced) of any description and in any position complete all as directed.

Demolition of brick work or stone/boulder massonry built in cement morter including all quoins, pillars etc complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sq m each, complete all as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as directed.

Dismantling of steel sheeting plain or corrugated of any gauge or thickness as in roof covering complete all as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as directed.

Materials and Labour for roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3 kg per sqm complete all as directed.

Demolition and breaking up drain pipes of SWG, AC or PVC pipe of any dia, set in cement mortar including bedding and hunching complete all as directed.

Excavating in trenches n.exc. 1.5 M wide and n. exc. 1.5 M in depth for foundation trenches, laying of under ground cable, pipe line etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading leveling watering and well ramming in layers not exc. 25 Cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Mtrs and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) Type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate as in surface channels and drains complete all as specified and directed.

Materials and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggt as in fwindow cill, steps,parapets,kerbs and coping etc. incl necessary form work and finished the surface fair and weathering slightly rounded or chamfered angles complete all as specified and directed.

Materials and Labour for precast reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggt as in precast post, man hole cover etc incl necessary form work complete and set in CM (1:4) all as directed..

Materials and labour for brick work with sub class' B' bricks straight or curved on plan exc 6m mean radius built in CM(1:4) complete all as specified and directed.

Materials and labour for brick work with sub class' B' bricks straight or curved on plan exc 6m mean radius built in CM(1:6) complete all as specified and directed.

Supply and fixing mild steel TMT bar 8 mm dia, cut to lenth, bent to shape as required including cranking,bending and binding with mild steel wire(annealed) not less than 0.9 mm dia as in main reinforcement bar complete all as specified and direted.

Materials and Labour for mild steel framed work as in grills,guard bars,gratings,framed guared bars,railings etc and similar works conforming to Grade E (Fe-290) complete all as specified and directed.

Materials and Labour for structural steel works in tubular trusses, purlin, rafter etc including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 complete all as specified and directed

Materials and Labour for mild steel plates Fe 410-W(Gde E-250)plain or chequired of any thickness, cut to size, bent to shape as required, drilled hole etc and fixed without any attachment complete all as specified and directed.

Supply and fixing pressed steel frames for doors with double rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125mm x 60 mm complete all as specified and directed.

Supply and Fix 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and Fix 35mm thick second class hard wood glazed and skeleton shutter open rebated without sash bar and prepared to receive glass, gauged etc,sizes of members of shutter as in SSR part-1 section 8.24(a) complete all as specified and as directed.

Supply and Fix powder coated anodised aluminium frame for doors, window and ventilators etc with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

Supply and fix mild steel butt hinges, medium weight, cold rolled 100 mm size complete all as specified and directed

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 125 mm long all as specified and directed.

Supply and fix Aluminium handles, cast type, anodized, 150 mm size all as specified and directed.

Supply and Fix, Aluminium anodized sliding door bolts, with hasp and stapple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts of cast aluminium alloy, 300 mm long, with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

Supply and Fix 300 mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and Fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avg with of aperature 1.40 mm fixed with tinned tack or wire stapple in position complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality nexc 0.50 sqm in each pane and glazing with oil putty in wooden door/window complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,valley and hipps girder of roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and Labour for false ceiling with Seamless calcium silicate ceiling board 10 mm thick made out of 1800 x 1200 mm size of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, over and including frame work made of GI channel 18 gauge thick main joist placed at 750mm centre to centre, cross joists placed at 450mm centre to centre, hanging with 6mm dia Gl wire suspenders from roof with 'J' hook bolts and nuts etc including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish and applying two coats of acrylic emulsion paint over one coat of primer on after preparation of surface with wall care putty to give a uniform smooth surface complete all as specified and directed.

Materials and Labour for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloure of tiles complete all as specified and directed

Materials and Labour for glazed ceramic coloured tiles of size 450X350X7mm thick ,on vertical surfaces of walls such as skirting and dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

Materials and Labour for machine cut polished kota stone slab flooring 20 to 25 mm thick over cement screed base, laid and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of the slab as in floor including rubbing and polishing complete all as specified and directed.

Materials and Labour for machine cut polish kota stone slab flooring 18 to 20 mm thick over cement screed base, laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab as in dado/ skirting on vertical surfaces of wall including rubbing and polishing complete all as specified and directed.

Materials and Labour for 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying/fixing floor tiles complete all as specified and directed.

Materials and Labour for 20 mm thick screed bed or bedding layer of cement mortar (1:6) for laying/fixing floor tiles complete all as specified and directed.

Materials and Labour for 10 mm thick screeding of cement mortar (1:4) for fixing wall tiles as in dado/skirting, complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brickwork or concrete surface and finished the surface even and smooth (without using extra cement) complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on other than fair faces of brickwork or concrete surface and finished the surface even and smooth (without using extra cement) complete all as specified and directed.

Materials and Labour for rendering 5 mm thick cement plaster in CM(1:4) mixed with integral water proofing compound over 10 mm thick backing coat in CM (1:4) on external surfaces of brick work or concrete surface and finished fair and even complete all as specified and directed.Note:-(Water proofing compound shall be measured and paid separately)

Materials and Labour for 25mm thick PCC (1:2:4) type B0 using 12.5 mm graded stone aggt as in floor finished fair and even to received top layer of flooring complete all as specified and directed.

Materials and Labour for 75mm thick PCC (1:3:6) type C1 using 20 mm graded stone aggt as in plinth protection,pavement, path etc finished the surface even and smooth without using extra cement complete all as directed.

Materials and Labour for applying two coats of oil bound washable distemper over one coat of primer on new plastered surfaces of walls after preparation of surface with wall care putty to give a uniform smooth surface complete all as specified and directed.

Materials and Labour for applying two coats of exterior weather emulsion paint over one coat of cement primer on new plastered surfaces of walls after preparation of surface with wall care putty to give a uniform smooth surface complete all as specified and directed.

Materials and Labour for complete removal of existing treatment from wall and applying two coats of oil bound washable distemper over one coat of primer on new plastered surfaces of walls after preparation of surface with wall care putty to give a uniform smooth surface complete all as specified and directed.

Materials and Labour for complete removal of existing treatment from wall and applying two coats of exterior weather emulsion paint over one coat of cement primer on new plastered surfaces of walls after preparation of surface with wall care putty to give a uniform smooth surface complete all as specified and directed.

Materials and Labour for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Materials and Labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primr complete all as specified and directed..

Materials and Labour for Salt-glazed stone ware drain pipes 200 mm internal dia(Grade 'A') laid in trenches and jointed in cement morter complete all as specified and directed.

Materials and Labour for concrete bed to drain pipes 200 mm bore in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate), including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) including unserviceable fittings such as switches, ceiling roses, pendents, regulators, socket, light fittings etc complete and making good disturbed surfaces of walls, floors etc.complete all as specified and as directed.

Materials and Labour for providing Point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including PVC casing caping of adequate size but not less than 20mm in width, 1.2mm thick with all fittings and accessories including mild steel sunk with terminal box of adequate size of thickness not less than 1.6mm thick with 3mm thick plastic laminated sheet top cover for mounting switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling including one run 1.5Sqmm (nominal area) PVC insulated flame retardant unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor and connected to common earth dolly complete all as specified & directed for the followings:-

One light point or one fan point controlled by one 5 Amps one way switch.

One 3/5 pin socket outlet, 5/6 Amps on independent board.

Materials and Labour for Sub main wiring with two runs of 4.0 Sqmm (Nominal area) of single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor cables 1100 Volt grade(Red for phase and Black for neutral) drawn into and including PVC Casing Caping of adequate size but not less than 20mm in width, 1.2mm thick with all fittings and accessories fixed to wall/ceiling etc including one run of 6.0 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor green in colour as earth wire and duly connected to earth point including taking down old sub main wiring all as specified and directed (Note :- PVC casing caping with two runs main cables and one run of earth wire will be measured as one length.

Supply and Fixing Switch piano, flush type,signle pole,one way, 6 Amps complete all as specified and as directed .

Supply and Fixing Socket outlet 3/5 pin, flush type, 5 Amps 240 volts complete all as specified and as directed.

Supply and Fixing ceiling rose,3 phase,PVC/polycarbonate ,isolated body complete all as specified and directed .

Supply and Fixing stepped type electronics fan regulator 220volts,100Watt flush type fitted on the phenolic laminated sheet etc as required complete all as specified and directed.

Supply and Fixing in repair Factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 415 Volts suitable for housing MCBs complete all as specified and as directed. Make L&T , C&S, Schneider or equivalent as approved by GE from list of approved makes.

Supply and Fixing MCB, SPN, 240 volts, 63 Amps 10 KA,C curve complete all as specified and as directed : Make-L&T make Cat No BB20630C or as approved by GE from list of approved makes.

Supply and Fixing MCB, DP, 240 volts, 32 Amps 10 KA,C curve complete all as specified and as directed : Make-L&T make Cat No BB20320C or as approved by GE from list of approved makes.

Supply and Fixing MCB, SP, 240 volts, 32 Amps 10 KA,C curve complete all as specified and as directed : Make-L&T make Cat No BB10320C or as approved by GE from list of approved makes.

Supply and Fixing in repair Batten integrated LED channel with 18W LED light of Havell's fitting REGALBATTENT8 upto 1x22 WSSBSWH suitable for T5/T8 tube lights and Havell's luminaire CRYSTAL 1213T8DSTL18W LED865SGLASS with LED tube rod complete set or equivalent of BAJAJ/PHILIPS including necessary connection with twin core unsheathed PVC copper cable of suitable size complete all as specified and directed.

Supply and Fixing in repair, fan hook suitable for hanging of ceiling fan made out of mild steel flat 40x5mm clamp or 12mm dia round bar duely welded/drilled including nuts, bolts and washers and cutting /chisseling, making good disturbed surfaces with cement mortar 1:3 and matching the surfaces by painting complete.

Materials and Labour for providing earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions;-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.

Supply and Laying XLPE insulated, armoured, heavy duty electric cables with aluminium conductor 1100 volts grade of cross sectional area 16 sqmm 4 core in trenches/ through GI pipe or fixed to pole etc including taking down old unservice able cable complete all as specified and directed. (Note)- (i) Excavation in earth work, sand cushioning, cable protection, GI pipe and cable joint shall be measuredandpaidseparately.

Material and labour for sand cushioning with dry sand in trenches for cushioning of under ground cable line including spreading, leveling, well ramming completed all as specified and directed.(Only punned thickness shall be measured)

Supply and Laying brick cable cover with sub class 'B' old size bricks laid dry for protection of UG cable completed all as specified and directed

Supply and laying Galvanised Iron pipe 40 mm dia bore (light grade) with all fittings, in trenches for protection of under ground cable complete all as specified and directed.

KAKWANI BUILDERS

M/S SEWAK SINGH