ADDN/ALTN TO LATIF (P-3) WITH OTHER ALLIED WORK SERVICES AT AF STN KALAIKUNDA

Amount

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L rendering 5mm thick cement plaster in CM 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 10mm thick cement plaster in CM 1:6 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15 mm thick in CM (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed. Note :- WPC measured and paid separetely.

Supply only integral water proofing compound.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M&L preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L preparation of new plastered surfaces applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and as directed.

M&L Preparation of old decorated plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparation of old decorated plastered or unplaster surface of walls and applying one coat of acrylic Emulsion distemper any tint complete all as specified and as directed by Engr-in-Charge.

M&L preparation of old decorated plastered or unplaster surface of ceiling and applying one coat of acrylic Emulsion distemper any tint complete all as specified and as directed by Engr-in-Charge.

M&L preparation of old decorated plastered or unplastered surface of walls and applying two coats of acrylic Emulsion distemper any tint complete all as specifed and as directed.

M&L complete removal of existing treatment of any description 3mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic Emulsion distemper over a coat of primer complete all as specified and as directed.

M&L preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not Exc 10 cm width or grith etc complete all as specifed and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L Vitrified Ceramic light shade tiles 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar 1:6, 20 mm thick etc complete all as specified and directed.

All as per item No-17.00 here in before but in skirting / dado with 10mm thick screed bed 1:3 cement plaster complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and dricted

M&L Glazed coloured ceramic tiles in vertical surfaces 450 x 300 x 7 mm,600x300x7mm thick set joint in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:3 10mm thick for laying dado/skirting tiles etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .

M&L 20 mm thick polished Granite stone slab Z black colour as counter top,shelves,cill & jambs of decorative type Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match incl. decorative , complete all as specified and as directed

M&L 20 mm thick Granite (of any type) work in single pices (table rubbed and polished) as in steps, jambs,floor, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Rounding to edges of stone slab one edge, such as in steps, cooking platform, and other similar situation.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing and making good of groves for concealed GI tube, cutting not exc 10cm girth.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F in repair vitreous China Urinal, Half stall type, size (380x405x590mm) (excluding flushing cistern, flush pipe and waste pipe) with push type brass chromium plated sprader complete all as specified & directed. of Make Make:Cera/ Hindware /Jaquar/ Parryware.

S&F in repair vitreous china wash down coloured water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinges devices complete all as specified and directed. Make:Cera/Hindware /Jaquar/ Parryware.

S&F in repairs Vitreous China Ware Wash hand basin counter top coloured oval type white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified. in cliding pillar tap fancy type complete all as specified. Make:Cera/Hindware /Jaquar/ Parryware..

S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capacity white with flush pipe & all fitting complete all as specified. Make:Cera/Hindware /Jaquar/ Parryware.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm

S&F PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed. Make:Cera/Jaquar/ Marc.

S&F in repairs towel Ring round with round flange of brass chromium plated including brackets. complete all as specified and as directed. Make :Cera/Jaquar/ Marc.

S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 500x60mm with CP bracket gaurd and railing 60 Cm long complete all as specified and as directed. Make :Cera/Jaquar/ Marc.

S&F in repair C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule, complete all as specified and as directed. Make :Cera/Jaquar/ Marc.

S&F in repair chromium plated concealed type chromium plated Stop valve screwed down high pressure with capston headed handle, screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and as directed. Make :Cera/Jaquar/ Marc.

S&F rotational moulded polyethylene multi layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one complete all as specified and directed all as specified and as directed.

S&F rotational moulded polyethylene multi layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one complete all as specified and directed .all as specified and as directed.

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) Make;Prayag

S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms)Make :Prayag

S&F in repair SS grating doom 125mm dia with waste hole complete all as specified and as directed. Make:Cera/Jaquar/ Marc.

S&F in repair Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete.Make:Cera/Jaquar/ Marc.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete. Make:Cera/Jaquar/ Marc.

S&F chromium plated Health faucet ABS SS Braided hose 1m with CP hook , and fixed for 15mm bore dia(Fancy type). Make:Cera/Jaquar/ Marc.

S&F in repair chromiuim plated Swivel shower roses with shower arm, 125 mm size including fxing to steel pipe or union etc. Make:Cera/Jaquar/ Marc.

S&F in repair brass CP wall mixer for mixing hot &cold water screwed down for iron pipe including telephonic shower and fixed complete all as specified. Make:Cera/Jaquar/ Marc.

S&F in repair brass CP basin mixer for mixing hot &cold water screwed down for iron pipe including telephonic shower and fixed complete all as specified. Make:Cera/Jaquar/ Marc.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed. Make:Cera/Jaquar/ Marc.

S&F in repair SS 6 pin door/wall hanger fancy type fixed to plugs chromium plated screws complete all ad specified. Make:Cera/Jaquar/ Marc.

S&F in repair stainless steel soap dish, fancy type fixed to plugs chromium plated brass screws complete.Make:Cera/Jaquar/ Marc.

S&F in repairs two way bib cock 15 fancy type with single knob and wall flange complete all as specified and directed.Make:Cera/Jaquar/ Marc.

S&F in repairs corner glass shelves 225mm fixed to wooden plugs with chromium plated brass screws and cup washers complete. Make:Cera/Jaquar/ Marc.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

Taking down PVC rain water pipe any size or pattern including all fittings all as specified and directed.

S&F 110mm bore PVC (swr) pipes single socketed in any length with rubber ring joints fixed to wall/laid in floor.

S&F 110mm bore PVC (SWR) bends any radius.

S&F 110mm dia PVC (SWR) junction, single (single T) equal or unequal with door access all as specified and as directed

S&F PVC (SWR) vent cowl 100mm dia

S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 75mm dia all as specified.

Demolition of cement concrete (un reinforced) of any description in any position complete all as specified and directed.

Applying evently a tack coat of industrial bitumen grade 85/25 at the rate of 1.2 kg sqm incl cleaning surfaces all as specified..

M&L cement concrete with brick aggregate in cement mortar 1:3 as in filling of sunken slabs, complete all as specified and directed

Applying APP based polymeric membrane minimum weighting 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt.not less than 160gms/sqm) land on primed surface by tourch complete all as specified.

M&L PCC 1:2:4 type Bo using 12.5 mm graded stone aggtegate 40mm average thickeness finished even and smooth w/o using extra cement all as specified..

M&L 15mm thick rendering in cement mortar 1:3 on concrete / brick surface finished even and smooth without using extra cement mixed with WPC (WPC shall be measured and paid separately) all as specified.

Taking down shutter exceeding 1.00 sqm and not exceeding 2 sqm each of any description any type.

S&F Aluminium powder coated louvers movable type in pairs for ventilators including locking arrangement complete all as specified

S&F Aluminium powder coated frame made out of hallow extruded section (minimum thickness of powder coating 50 micron) for window/ventilatorswith one or more rebates including joining cleats, beads for fixing etc complete all as specified

S&F 4mm thick Figured glass pin head type and glazing withrubber gasket in squares n.exc 0.50 sqmm in each pane

S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and with stainless steel wire staples complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed

S&F mirror mounted on 12 mm thick BWP grade plywood with alround 50mm wide teak wood bedding and teak wood finish polish approx overall size 2.10 x0.75 m fixed to wall using wooden plugs and CP brass screw complete.

Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in Plinth protection etc complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles.

M&L consealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one way switch 5/6 amps.

(b) One Exhaut fan point controlled by one way switch 5/6 amps.

(c) One socket out let 5/6 amps point on the independent board

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. Make : Anchor Penta/ Havell's Reo

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and directed. Make: Anchor Penta/ Havell's Reo

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S&F IP 20, class I, LED light 1X10 W (or nearest next higher wattage) (2feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

M&L concealed sub-main wiring of two run of wire size of 6.0 Sqmm alongwith one run of earth wire of size of 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete all as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete all as specified and as directed.

S&F heavy duty exhaust fan 300 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds, Air delivery -1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and as drected.

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 KA, incl necessary connection complete all as specified and directed.

Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 ltrs capacity 230 volts AC 50 Hz comprising of high wattage heating element for instant heating extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non- ferrous prewssure plate with and including provision of 04 Nos grouting bolts suitably flush to wall or any other surfaces 25 lts BEE 5 Star rated complete stranded copper conductor cable/ flexible chord complete all as specified and as directed.

M&L GI water tubing medium grade 15 mm dia fixed on consealed in wall/surface with all fittings and fixtures complete all as specified and directed.

S&F angle stop valve but fancy type, chromium plated, screwed down (CP) of size 15 mm fancy type complete all as specified and directed.

M&L bib taps cast copper alloy with butterfly handle , screwed down, screwed for iron pipe or for brass ferrule and fixed for bib tap 15 mm dia fancy type all as specified and as directed.

S&F Gun metal ,globe Gate Valves with iron wheel head of 15 mm dia bore complete all as specified and directed.

S&F 2 feet long hot/cold water PVC Connection pipe, heavy duty, braided PVC pipe & the connector nuts coated with stainless steel, incl rubber washer complete suitable for 25 Ltr gyser complete all as specified and directed.

JEETEN ENTERPRISE (BID ID -3193122)

M/S Tapan Sur (BID ID -3193759)

M/S Jamuna Traders (BID ID -3193108)

M/s Tekcon International (BID ID -3193091)

Dilip Enterprise (BID ID -3193140)

Guru Charan Mahata (BID ID -3193499)