Dam Rehabilitation and Improvement Project works to establishment of Park at Pykara dam in Kundah Generation Circle Nilgiri District Tamil Nadu under World Bank funded DRIP II III

Amount

Levelling the site, landscaping and preparation of of ground for establishment of park work site ect.,complete, as directed by the site Engineer as per standard specification.

Providing Turfing including separating of soil, manure including cost of materials, lead, lift,fixing charges etc., complete.

Supplying, transporting and laying of 80mm thick paver block of colour, size and shape approved by the departmental officers confirming to standard specifications over the consolidated sand bed of 100mm thick. The compressive strength of pavers should not less than 40 kg/cm2 including cost and conveyance of all materials, cutting, finishing the stones and using mechanical vibrator for levelling, all leads ,lifts, etc., complete.

Supplying, fabrication and erection of structural steel of 75mm X75mm x8mm for placing of verical and strut post post for chain link fencing and other structural work for Name Board including cost painting two coats enamal of binding wire and lead, lift etc., complete.

Supply and fixing of GI Chain link fencing 10 gauge of approved make and standard size of 50 x 50mm of the Dam including painting Two coats enamal , cost of all materials lead,lift, aligning, labour charges etc., complete.

Supply and fixing alignment in position of ornamental main gate 1 No of suitable size with MS structural steel for the including cost of all materials lead,lift, aligning,painting with primar coat, transport, labour charges etc., complete. as per the direction of the Engineer and complying with standard specifications.

Supplying and laying of NP3 Class 900 mm dia RCC Hume pipe confirming to IS is 458/2003 including cost of pipe as a finished work including all other incidental charges, testing charges including loading, unloading, transport and delivery in good condition at work site ect.,complete, as directed by the site Engineer as per standard specification.

Providing kerb wall using prefabricated curb stone using precast kerb stone of size 400mm x 259mm x 200mm thick made of M 20 grade of concrete rectangular in shape with one corner chamfered by 100 mm x 100 mm as per approved design including cost of materials, lead, lift,fixing charges etc., complete.

Planting of ornamental trees including maintenance of Initial 6 months including cost of materials, lead, lift,fixing charges etc., complete.

Design water fountain measuring just 29.5 x 22 x 10 cm, the Trevi Fountain stands 26.3 meters high and 49.15 meters wide. Other factors like the fountain's material, design, and intended use also influence its size and appearance, according to fountain size guides. including pipe lines, water pool including cost of materials, lead, lift,fixing charges etc.,as directed by the Engineer at site and should be got approved from the competent authority etc,complete.

Providing play equipment's See Saw four Seated with fiber seats 1.00No, Swing two seated with fiber seats and GI chain 1No, Family swing three seated with top shelter,Jungle gym 4 ft B x7.5 ft H, Merry go round six seated with fiber seats,Circular swing two seaeted including cost of materials, lead, lift,fixing charges etc., complete.

Making flower park with all types of flowers as directed by the department Engineer at site including maintenance for 6 months including cost of materials, lead, lift,fixing charges etc., complete.

Providing water supply to fountain and other requirements from Dam to park area including cost ofSupplying and laying in position of GI pipe 50 mm dia line of medium class ( B class) of TATA make or equivalent conforming to IS 1239 as directed by the Engineer in charge including cost of all materials, specials such as Tees, bends, Couplings, screws cutting , threading, joining, specials, TW plugs, packing and wrapping the pipe and fixing the pipe on the pedestal with galvanized iron clips lead, lift etc., complete.

Providing Granite bench for a size of 1500mm X 620mm (lx W) arrangements including cost of materials, lead, lift,fixing charges etc., complete.

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shale, murram gravel, stoney earth & earth mixed with small size boulders and hard gravelly soil and depositing the earth in the places shown by the Engineer with initial lead of 10 M and initial lift of 2 m etc., complete,for culvert and retaining wall at approach road complying with standard specifications.

Providing and placing in position Plain Cement Concrete 1:3:6 using broken hard granite coarse aggregate size of 40mm and down graded including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications in the fencing post foundation.

Providing and placing in position Plain Cement Concrete 1:1.5:3 using broken hard granite coarse aggregate size of 20mm and down graded including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour, shuttering charges etc., complete as per the direction of the Engineer and complying with standard specifications.

Filling the River sand in Children park play area including costof all materials transportation, consoliation, lead, lift, etc complete.

Providing and placing in position Reinforced Cement Concrete M20 using broken hard granite coarse aggregate size of 20mm and down graded to I.S Specified in for Gate piller including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete but including cost of steel reinforcement as per the direction of the Engineer and complying with standard specifications.

Supplying, fabricating and placing in position of RTS or MS rods of required size for all reinforced cement concrete works for office building including cost of binding wire, steel rods, conveyance charges, cutting, bending, tying with all lead, lift and labour charges etc., complete, complying with standard specifications and as directed by the Engineer at site.

Supplying and fixing of PVC(sintex) water tank of 1000 lit capacity approved make and quality as per the specification including cost of all materials, erection, testing, lead, lift, labour for cutting and fixing etc., complete and as directed by the engineer at site.

Supplying and laying in position of GI pipe line of 50mm dia medium class ( B class) of TATA make or equivalent conforming to IS 1239 as directed by the Engineer in charge for water supply arrangements outside the Building including cost of all materials, specials such as Tees, bends, Couplings, screws cutting , threading, joining, specials, TW plugs, packing and wrapping the pipe laid underground with hessian cloth and tarring and fixing the pipe above ground to walls with galvanized iron clips lead, lift etc., complete - 30M complying with standard specification and as directed by engineer incharge of work.

Supply and fixing of 10Kg/cm2 pvc pipes of 20mm dia including cost of all materials, lead, lift, labour for cutting and fixing etc., complete and as directed by the engineer at site

Supply and fixing of chromium coated Bib cock of 20mm dia of approved quality including cost of all materials, lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.

Supplying and providing 25mm gun metal gate valve (heavy duty) including cost of all materials, erection, testing, lead, lift, labour for cutting and fixing etc., complete and as directed by the engineer at site.

Supplying and providing 50mm gun metal gate valve (heavy duty) including cost of all materials, erection, testing, lead, lift, labour for cutting and fixing etc., complete and as directed by the engineer at site.

White washing with two coats of white cement of approved quality for Protection wall and ceiling including cost of all materials, leads, lifts, labour etc., complete complying with standard specification and as directed by engineer in charge of work.

Colour washing using exterior and interior emulsion two coats over one coat of Primer to the outer side of the protection wall including cost of all materials, labour. T & P etc complete complying with standard specification and as directed by engineer in charge of work.

Supply, erection, testing and commissioning of new 48 watts, 230 V, LED street light outdoor fitting of Phillips / Crompton / Havells or equivalent make with ISI standard, 15' street light pole fabricated from 3" MS class B pipe for bottom 2/3 length and 2' MS class B pipe for top 1/3 length and welded with 300x300x6 mm MS base plate with four nos hole to suit 16 mm bolt, rib, supporting pipe 0.3 mtr length, outdoor terminal box of size 250x200x150 mm made from 14SWG (2mm) Galvanized Iron (GI) sheet with single coat primer, two coats Epoxy paint gray colour suitable for outdoor use with terminal blocks of adequate capacity and adequate gland holes at bottom , connecting the street light fitting to the terminal box with 3c x 2.5 sqmm flexible copper cable , earthing of the street light pole and providing monkey guard arrangements to avoid the damage of the fittings from monkeys using angle and weld mesh for adequate size, coping concreting of the pole at the dam top to the satisfaction of Engineer at site including the cost of materials, labour, lead, lift etc., complete.

Supply, erection, testing and commissioning of new post top decorative lantern fitting of good quality suitable for 9/10 watts LED lamp of reputed make with ISI standard to be fixed at the top of the existing concrete lamp post at the dam top with outdoor terminal box of size 250x200x150 mm made from 14SWG (2mm) Galvanized Iron (GI) sheet with single coat primer, two coat Epoxy gray colour paint suitable for outdoor use with terminal blocks of adequate capacity and gland holes at bottom and providing monkey guard arrangements to avoid the damage of the fittings from monkeys using angle and weld mesh for adequate size, connecting the fitting with 2.5 sqmm, 3 core,1100 volts, unarmoured flexible copper cable to the terminal box and closing the old terminal box opening to the satisfaction of Engineer at site including the cost of materials, labour, lead, lift etc., comp

GST for bidders within TamilNadu Note : Bidders within Tamil Nadu shall enter values separately for SGST and CGST and shall enter the value as "Zero" for IGST.

GST for bidders outside TamilNadu Note: Bidders outside Tamil Nadu shall enter value only for IGST and shall enter the value as "Zero" for SGST and CGST

SAKTHI AND CO (BID ID -1477616)

stanely hitech construction company private limited (BID ID -1473559)

Bidder Name

stanely hitech construction company private limited

VAKMA USA INFRA

SAKTHI AND CO