REPAIRS/MAINT OF CERTAIN ROADS/FOOTPATH, ROAD FURNITURE AND ROAD PAINTING/MARKING IN AREA OF AGE B/R- I UNDER GE (WEST) LUCKNOW.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and and finally fanning the cleaned surface with gunny bags to remove all loose dirt/ dust etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG 10 @ 5Kg /10 sqm complete all as specified and directed.

M & L for 30 mm thick consolidated thickness bituminous premix semi dense asphaltic concrete with 5.50 % binder content (bitumen of grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compactad to required camber and gradient complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

S & F cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of size 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and weight 164 gram fixed with special epoxy chemical as per manufactures instructions complete all as specified and directed.

S & F aluminium-alloy body Solar stud with following specification :- (a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight. (b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point. (c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud. (d) Working time 3 to 4 days successively after the battery is fully charged. (e) Charging time for full charge One full sunny day. (f) Working temperature : 10 to 75 Degree Celcius. (g) Flash rate : 60 to 70 times per minute normally. (h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving. (j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx. (k) Solar stud should be free of maintenance and operational in all weather conditions. (i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess. Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank) (m) Weight of the Solar Stud should be 650 Gram approx. (n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface.

M & L for providing and applying 2.5 mm thick road marking strips n exc 15 cm width with 250 gram Glass Beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dier, seals, oil, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -12%, Resin-19% & Intermix Glass Beads - 34 % in proportion.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like on roads pavements with hot applied thermo plastic road marking paint with glass beads of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

S & F dual directional reflective cat eye ABS Body casted stud of size not more than 130 mm and height not more than 20 mm having plastic ABS strips containing retro reflective glass beeds of colour white/red/yellow fixed with specialised epoxy system adhesive or with steel zinc plated nail of dia 12 mm of lenght 120mm for fixing to road by hammering including necessary replacement of damaged/displaced items complete all as specified and directed.

S & F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

M & L for metal road delinators made out of 75mm bore medium grade MS pipe of length 80cm embeded with PCC 1:3:6 of size 30cm x30cm x 30cm using 20mm graded stone aggregate 30cm below road level including taking down existing corroded/broken delinators and applying tow coats of synthetic enamel paint over a coat of zinc chrome paint and fixing with high intensity prismatic reflective tapes of 137.5mm width red colour in 2 pieces and 137.5mm yellow/white colour 1 piece alternatively complete all as specified and directed.