Improvement of Pond at Jullaka Mohalla in ward no.2 Jammu

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge(IN Cement mortar)

Demolishing RCC work manually/by mechanical means including stacking of steel bars and disposal of unservicable material within 50m lead as per direction of engineer incharge

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed .(All kinds of soil).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machin cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels(Area of slab over 0.5 sqm).

Providing and laying in position specified grade of RCC including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement of R.C.C work including straightening, cutting, bending, placing in position and binding all complete with Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form for:Edges of slabs and breaks in floors and walls Under 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for: columns,pillar etc. for mass concrete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in:Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

15 mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Removal of excavated mulba dismantled or unservicable material from the site of work by mechanical transport or animal transport or otherwise including loading/unloading (complete job) Av. 5 km.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1 Hot finished welded type tubes

Providing and fixing of Electricity to enterance with conduit,wire,switches,board,with g.i box,etc complete

Providing and fixing P.V.C batten/angle holder withL.E.D Bulb 9 watt with all fittings complete job.

3D WALL MURAL; Preparation of base by way of repairing the surface by providing plastering patches/new plastering along with marking the same with depiction of the theme of the story to be projected on the surface .After that marking the armature of the mural with nails and binding wire and applying cement sand mortar 1;3 layer by layer from the base so that the mural is projected 2"-3" from the surface along with finishing work to be done by an artist.the mural/artwork is to be done by the artist.The mural/artwork is to be cured for minimum of 7 day subsequent to which it shall be applied with a prime coat and multiple colours painting with high class P.U. Exterio Emulsion/metallic single color and to be coated with clear varnish/touch wood/lacquer for protection against rain and sunshine .(Including conceptual drawing/plan/survey/Architectural/Structural of Main Enterance Deodi and consultancy etc).

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Refilling of water in pond by using water pump,water tank including all carriages complete

Providing and fixing of granite plate including text writing complete job

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

providing and fixing of .5 hp motor pump of standard quality Havells,cromptom or equivalent brands with all fittings complete job.

Providing and fixing of transformer of 1500 watt of standard quality with all fittings complete

Providing and fixing of water cooler of standard quality having capacity 80 litre capacity.blue star all fitting transportation complete job.

providing and fixing of water purifier of Aquaultra or equivalent brand complete job

Labour engaged for dismentaling of old c.c. work removal of mulba and its disposal

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing designing and fixing of Air Walker of following specifications:- Size: 1070*460*1360mm Main Post: 140 mm dia and 4.0mm thickOther Pipes: 88mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Providing designing and fixing of Arm Wheel of following specifications:-Size: 840*640*1650mm Main Post: 140 mm dia and 4.0mm thickOther Pipes: 88mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Providing designing and fixing of Exercise bike of following specifications:- Size: 870*600*980mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 60mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.

Providing and Fixing of Cast iron Bench capacity 3 Adults size 1.52 x.60x.37 m .The work shall conform to IS 210 and shall be executed as per direction of Engineer in charge C.I.(Cast iron) 5 feet and 10 square tubes bearing load 240 kg comprising back and seat painted suitablly with wooden/brown/green/ in colour ,Stand / legs made of decorative cast iron material for mounting 32" in height ,24" in width complete including cost towards loading,transporation,fixing complete

Dumping of stones including cost of stones,supplying of stones Complete job.

Providing and fixing of weep holes 100mm complete job.

Provision for consultancy for design of RCC Wall

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Carriage of materials by mechanical transport including loading / unloading & stacking complete Brick avg. 10 km

Carriage of materials by mechanical transport including loading / unloading & stacking complete stone aggregate below 40mm nominal size for an average distance of 10 kms.

Carriage of materials by mechanical transport including loading / unloading & stacking complete sand for an avg distance of 10 kms

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade(two or more coats on new works)

Chequerred terrazzo tiles 22mm thick with graded marble chips of size upto 6mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, polishing and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Ordinary cement without any pigment.