Tender ID

Karnataka

AOC

Works

Buildings

CONSTRUCTION OF ANGANAWADI BUILDING NO 29 OF SONNA VILLAGE OF BILAGI TALUK

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Karnataka

Amount: ₹10.1 LCloses: 23 Dec 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published9 Dec 2025
Closed23 Dec 2025
Awarded—

Bids

1 Bid23 Dec 2025

#	Company	Amount	Status
1	SANJAY BAJETTI ₹8.8 Laccepted-aoc	₹8.8 L	accepted-aoc

Tender Value

₹10.1 L

EMD Value

₹25,282

Closing Date

23 Dec 2025, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRED BAGALKOTE

Office Number

Mobile Number

Work Description

CONSTRUCTION OF ANGANAWADI BUILDING NO 29 OF SONNA VILLAGE OF BILAGI TALUK

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT20977

Reference Number

RDPR/2025-26/BD/WORK_INDENT20977

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredPRED/KPWD CLASS-III AND ABOVE Registration Certificate

RequiredTenderer must Submit PAN & GST Certificate

RequiredTenderer must have of value 2020-21, 2021-22, 2022-23 2023-24, & 2024-25 satisfactorily completed as a prime contractor at least one Similar nature of work/Cost of Building work of 50 PERCENT of the Amount Put to Tender 50 Percent of not less than Rs.5.06 lakhs issued by the officer not below the rank of Executive Engineer For Similar nature/BUILDING works work done certificate with works should be produced Work done with indent No

RequiredWork orders / commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredTo qualify for award of this contact each tenderer in his name should have in the 2020-21 to 2024-25 years period achieved in at least two financial years an average financial turnover of Rs.10.11 Lakhs usually not less than amount put to tender from C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified

RequiredAccurate postal address and phone / cell phone number

RequiredTenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity A X N X 2.5 - B

RequiredContractor should submit / upload the difference amount as per the CSR 2024 25 in FDR

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.

All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Tenderer must submit his present accurate postal address and phone / cell phone number

The cost of the Tender form shall not be refundable.

Unique Document Identification Number (UDIN) from Practicing Chartered Account Must Preferred

Work shall be executed as per KTPP Act & KW-1&2 Conditions.

The Rates Quoted In The Estimates Are Exclusive of GST Taxes.

The GST will be Paid Separately to the Contractors as per the Guidelines of the Government Time to Time.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Bagalkote within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy.

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22 2022-23 2023-24 & 2024-25 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Amount Put Tender (Turn over With compulsory UDIN Number) (in all classes of civil engineering construction works only)

The Tenderer shall obtain similar the workdone certificate Construction of Similer nature Works within the financial years of 2020-21 to 2024-25 (50% of the Amount Put to Tender) i.e in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

This work is Randomized as OTHERS Category. Hence any Category of Contractor can bid.

Tenderers must have valid PRED/PWD registration CLASS-3 AND ABOVE and must submit PRED/PWD registration copy.

Single Tender Will Not Be Accepted

NOTE : ONLY RELEVANT SCANNED COPY OF THE ORIGINAL DOCUMENT TO BE ATTACHED FOR THE CORRESPONDING CONDITIONS MENTIONED.

Period for completion of work is 4 Months

The Project Completion period is 4 Months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon).

Tenderer must submit copies of documents according to KW-1&2 document

Lot No 8441 Sl No 03 Others

Videography and photographs in three stages should be taken and submitted along with the bill before starting, during execution and after completion of work in the presence of the section officer

All materials including complete with all lead and lift and as per the direction of Engineer in charge of work

All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹25,282

Important Dates

Last Activity

23 Dec 2025

Published

9 Dec 2025

Download Ends

22 Dec 2025

BOQ Preview

•

CONSTRUCTION OF ANGANAWADI BUILDING NO 29 OF SONNA VILLAGE OF BILAGI TALUK

•

Providing Brick work with common burnt clay Non Modular bricks of

•

class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

•

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal siz...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement

•

mortar 1:6, 25mm thick over existing cement concrete bed or top of roof

•

laid to line and level and jointed with cement slurry mix...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to

•

brick/stone masonry including rounding off corners wherever required

•

smooth rendering, providing and removing scaffolding, includi...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

•

4 fine sand) to brick masonry including rounding off corners wherever

•

required smooth rendering, providing and removing scaffolding, in...

•

Providing and applying white cement based putty of average thickness

•

1 mm, of approved brand and manufacturer, over the plastered

•

wall surface to prepare the surface even and smooth complete as per

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory

•

windows, ventilators and other frames, wrought, framed or assembled

•

including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters

•

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

•

180mm wide top rail and stiles 100mm wide as per d...

•

providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (matching to RAL-9016) sections and minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Themo Plastic Elastomer)...

•

Painting wood work with Deluxe Multi Surface Paint of required shade.

•

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

•

@0.75 L/10 m² of approved brand and manufacture to give an e...

•

Providing and fixing ISI marked M.S. pressed butt hinges bright finished

•

with necessary screws etc.75x47x1.7mm .(PWD SR 2023-24 / Volumme II / I.NO-12.68.4 /P.NO-106)

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm(PWD SR...

•

Providing and fixing chromium plated brass handles of 100/125 mm with

•

necessary screws etc. complete (PWD SR 2023-24 / Volumme II / I.NO-12.62 /P.NO-105)

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

•

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with

•

primer & two coats of acrylic emulsion black paint including finishing

•

etc.,complete. (PWD SR 2023-24 / Volumme II / I.NO-8.84 /P...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water

•

pipes conforming to IS : 13592 Type A, including jointing with seal ring

•

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply, including all CPVC

•

plain & brass threaded fittings, including fixing the pipe wi...

•

Providing and placing on terrace (at all floor levels) polyethylene

•

water storage tank, IS : 12701 marked, with cover and suitable locking

•

arrangement and making necessary holes for inlet, outlet and ...

•

Providing & fixing White vitreous china water closet squatting pan (Indian

•

type) along with "S" or "P" trap including dismantling of old WC seat and

•

"S" or "P" trap at site complete with all operation...

•

Providing and laying vitrified floor tiles with thickness 9-10mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid...

•

Angle back wash basin of size 600x480 mm (PWD SR 2023-24 / Volumme II / I.NO-14.25.3 /P.NO-135)

•

Earth work excavation by manual means for drains,canals, waste weir

•

draft, approach channels, key trench, foundation of Bridges and such

•

similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

•

including cost of all materials, machinery, labour, cleaning, straightening,

•

cutting, bending, hooking, laping/welding joints, tyin...

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = foundation and substructure

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = column

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = plinth beam

•

Providing Brick work with common burnt clay Non Modular bricks

•

of class designation 3.5 in foundation and plinth in Cement mortar

•

1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

•

4 fine sand) to brick masonry including rounding off corners wherever

•

required smooth rendering, providing and removing scaffolding, in...

•

Distempering with dry distemper of approved brand and manufacture

•

(two coats) of required shade on new work, over and including

•

water thinnable priming coat to give an even shade after thoroughly

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using 1100V grade,copper conductor fexibele multistrand FRLS PVC insulated, 2 x 1.5 Sqmm cable conferming to GTP,with a ...

•

do- Mediumpoint above 3Mtr upto 6Mtr from tapping point to out let via switch (PWD BGM SR Electricl Pg.No.5 It.No.2.1.2)

•

do- Long point above 6Mtr upto 10 Mtr from tapping point to out let via switch (PWD BGM SR Electricl Pg.No.5 It.No.2.1.3)

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in a existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring ...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete. -do- 10"x7"x3" ...

•

SupplyingandfixingofPVCcasingandcappingonthewallorceilingusingnecessarymaterialslikebends,junctionbox,elbows,screwsatan interval of 300 mm as required. (PWD BGM SR Electricl Pg.No.3 It.No.1.8.2)

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GT...

•

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCB's single phase /...

•

Supplying And Fixing of regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts nuts etc.. With provision for fixing suitable type capacity MCBsingle phase / ...

•

Supplying and fixing of 5 -80 W of T8 Fluorescent Tube with 54W power consumption withlow 3mg Mercury content less phosphor coating Operating voltage range from 180 V to 265 V, 50HzA Cpower Supply. (P...

•

Fixingalltypesandallcapacitiesoffluorescent/falseceiling/spotlight/CFL/LEDfittingsindooronthewall/ceiling/rafters/girdersusing23/0.0076"twintwistedPVCinsulatedwires,requiredNosofround blocks and clamp...

•

Fixingaceiling/Wallmountingfanofallcapacitiesandalltypestotheexisting'S''hookwithfanregulatortotheexistingboardtogetherwithsupplyingandfixing5A.ceilingrose,necessarylengthof23 / 0.0076 inch PVC insula...

•

Supplyingcapacitortypeceilingfancompletewithdownrodblades,shackle,canopiesetc,foroperationon230V,50cycles.SinglephaseACsupplyconformingtoISS-374-1979andwithdoubleballbearingsystem. 56" Sweep (1400 mm)...

•

Supplying,fixing and wiring Residual current circuit breaker (RCCB) 240/ 450 V upto 300mA sensitivity on existing wood/ panel board. (Electrical SR P.NO-18 /I.NO-5.20.1)

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5mtr long buried in a pit. The pit should be...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-1-20977.docx

Tender Document • 1.84 MB

sonna anganwadi drawing.pdf

Tender Document • 0.71 MB

anganwadi estimate.pdf

Tender Document • 7.98 MB

sonna anganwadi tech copy.pdf

Tender Document • 3.24 MB

sonna anganwadi adm copy.pdf

Tender Document • 4.91 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SANJAY BAJETTI

₹8.8 Laccepted-aoc