Provn of JCO Accn with att Bathroom for four JCO of 1 Corps Provost unit, 1XWaiting Room with Toilet for Strike 1 Polyclinic near Bldg No P28 at Veer Line of 4001 FD Hosp, Toilet Block for RATC Line GD Post, Addn Class Rooms for Children school

Amount

M&L for surface dressing n. exc.15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.50 meter wide and not exceeding 1.50 meter in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 square meter on plan and not exceeding 1.50 meter in depth and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches exc 1.5 mtr wide & not exc 3.0mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 3.0m in depth and getting out in soft / loose soil complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan in half thick wall bult in CM 1:4 complete all as specified and directed.

M&L anti termite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of EC20% emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured complete all as specified and directed.

M&L anti termite treatment for treating the bottom and sides of excavation at the rate of 5 liter of EC 20%emulsion per sqm of surface area complete all as specified and directed.

M&L anti termite treatment for treating the top surface of filled earth at the rate of 5 liter of EC 20%emulsion per sqm of surface area complete all as specified and as directed.

M&L anti termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 liter of EC 20% emulsion per meter of the perimeter wall at the rate of 5 litres of emulsion per Sqm of surface area complete all as specified and as directed.

M&L anti termite treatment for treating the soil under plinth protection at the rate of 5 litre of EC 20% emulsion per Sqm of surface area complete all as specified and as directed.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation or mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation or mass concrete complete all as specified and directed.

M&L RCC Design Mix( M- 25 ) using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams , beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed.

M&L RCC Design Mix( M- 25 ) using 20mm graded stone aggregate for column pillers, piers, post and struts complete all as specified and as directed.

M&L RCC Design Mix( M- 25 ) using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintel beam etc complete all as specified and as directed.

M&L RCC Design Mix( M- 25 ) using 20mm graded stone aggregate as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Reinforced cement concrete Design Mix( M- 25 ) using 20mm graded stone aggregate as in chajja complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square,rectangular or polygonal rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs,landings and similar works : not exceeding 200mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to chullah hoods, chajjas troughs and similar items including edges rough finished flat surfaces of concrete complete all as specified and directed.

M&L for 30mm thick (measured solid) precast cement concrete louvers and jallies type B-0 mix 1:2:4 (using 12.5mm graded stone aggregate) including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed.

M&L mild steel TMT bars,10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto all as per item No 26 here in before but 6 to 8 mm dia.

Ditto all as per item No 26 here in before but 5 mm dia and over upto and including 10mm dia as in stirrups.

M&L for rendering 15 mm thick in two layers,5 mm thick CM (1:4) mixed with water proofing compound at 3% by weight of cement over 10 mm thick in CM (1:6) on fair faces of brick masonary or concrete surface of wall,finished even & smooth,without using extra cement Note :- WPC shall be measured and paid seperately as supply only

M&L rendering 10mm thick in cement mortar 1:6 on other than fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in CM 1:3 on concrete surfaces of chajja/ ceiling, etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for Hardcore of brocken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L Prepration of new plastered surfaces of wall and applying two coats of cement based paint using hand roller over and including a coat of alkali resistant primer complete all as specified and directed.

M&L for Prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for Prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even & fair and 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three part of sand ( all by weight) complete all as specified and directed.

M&L cement concrete 1:3:6 mix type C2 (using 40mm graded stone aggregate) as in bed to drain pipe including packing under and hunching against the sides of pipes after laying in trenches to required slope and tested complete all as specified for 150 mm bore pipe complete all as specified and directed.

M&L for 18-20mm thick machine cut Kota stone of size 550mm x 550mm as in flooring laid over and including 20mm thick in CM 1:4 and jointed with grey cement slurry to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L 18-20mm thick Kota stone slabs as in vertical surfaces like dado or skirting over 10mm thick rendering in CM (1:3) set & joined in neat cement slurry and pointed in coloured cement to match incl rubbing & polishing complete all as specified and directed.

S&F light shade coloured vitrified ceramic tiles 10mm thick, (Square / rectangular) area of each tile n.exc 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm thick rendering in CM (1:3) complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200 mm long complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) & fixing clips of sheet, cast and extruded section & fixing bolt & sliding bolt of extruded section of size 300mm long complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) & fixing clips of sheet, cast and extruded section & fixing bolt & sliding bolt of extruded section of size 250mm long complete all as specified and directed.

S&F 100 mm butt hinges , heavy duty weight ,cold roll mild steel complete all as specified & directed.

S&F for 200mm long aluminium handles complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, size of frame 125 x 60mm chowkhat, cabinet chowkhat, angle iron nosing to steps and angle inron braket etc conforming to Gde Fe-410-0 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in filling of door frames complete all as specified and as directed.

S&F factory made Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, fixed in opening as per specification & drawing given in SSR Part-II 2020.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Anodised aluminium door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packng, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F 35mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F anodised aluminium frame with powder coating for doors, windows, ventilators with one ore more rebates including jointing cleat for fixing etc complete all as specified and directed.

S&F factory made Mild steel ventilator with top hung shutter incl hinges, steel peg stay with shop coat of primer zinc chrome complete all as specified and directed.

S&F 35mm thick factory made IInd class hard wood panelled door shutters (any numbers of panel) with panels of 12 mm thick BWR plywood having seven ply with commercial veneers on both face of BWP grade and boded with phenol formaldehyde synthetic resin adhesive ISI mark. The size of rail & stile as per IS :1003 (Part-I) kilnseasoned and chemically pressure treated complete all as specified and directed.

S&F factory made steel windows, ISI Marked, with side hung shutter including box type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolt, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded and also including with one shop coat of red oxide zinc chromate primer complete all as specified and directed.

M&L 5.50mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed.

M&L 4mm thick figured glass, pin head type and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed.

Rendering 10mm thick in CM 1:4 mixed with integral water proofing compound on concrete surface in roof including applying cement slurry @ 3Kg per Sqm finishing even and fair without using extra cement (WPC shall be measured separately) and than applying polymeric polypropylene polymer membrane ‘APP” (Atactic poly propylene polymer) modified prefabricated five layer 3mm thick not less than 3Kg/Sqm over a coat of bitumen primer membranes 0.4 ltr/Sqm by the same membrane manufactured of density at 25 degree C’ 0.87-0.89 Kg/ltr and viscosity 70-160 CPS. Applying a coat of bitumen primer 85/25 grade @ 1.2 Kg/Sqm of surface and then laying APP membrane using butane torch with 10cm over laps which shall be thermo fused by flame and over the APP membrane complete all as specified and directed. Make : IWL or equivalent in makes as given in appendix 'B' to Particular Specification.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), clamps, hold fasts, wall ties, and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distempering white or tinted over and including one coat of wall care putty to achieve smooth finish using hand roller over one coat of water based white pigmented alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new wooden or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint of make : weather coat of Berger or equivalent item of specified make.

M&L for preparation of plastered surface of walls and applying two coats of oil bound distemper of any colour over a coat of primer over and including a coat of cement base wall care putty applied as per manufacturer's instruction complete all as specified and directed.

M&L for non-skid ceramic coloured tiles superior quality 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed CM in (1:4) complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed CM (1:4) complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as leveling corse in floor and finish surface even & rough complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in Sub base of floors complete all as specified and directed.

M&L for Chequered cement concrete tiles (with white cement and pigment) 30cm x 30cm x 25mm thick rubber moulded glossey finish, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bedding in cement mortar (1:4) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 350 x 450 x 7mm thick as in vertical surface like dado or skirting set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M&L collapsible steel Gates double leaves top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc erected in position and securing runners with hold fasts and brackets complete all as specified in clause 10.24 of SSR Part-I and directed.

Excavating over areas n.exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

S&F PVC valveless 10 ltr capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC flush pipe of sutable size complete all as specified and directed.

S&F 100 mm dia PVC (SWR) WC connector bent type complete all as specified and directed.

S&F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions chromium plated (long shank concealed type) and fixed to pipe of 15mm bore complete all as specified and directed.

S&F PVC connection 15mm size of length 600mm, with brass nuts complete all as specified and directed.

S&F bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe or brass ferrule and fixed chromium plated fancy type15 mm bore complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed.

S&F health faucet mild steel chromium plated suitable for 15 mm dia 1.25 m long flexible tube and wall hook including fixing complete all as specified and directed.

S&F toilet paper holder brass chromium plated including fixing to wall complete all as specified and directed.

S&F Viterous China urinal half stall type white with grating & union for discharge pipe including 15mm PTMT push tap suitable for urinals, PVC Connection, brackets etc complete all as specified and directed.

S&F 40mm dia brass CP bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing union and cap complete all as specified and directed.

S&F brass chromium plated waste coupling 32mm dia (half of full threaded) for wash basin etc with long screwed shank and fly nuts complete all as specified and directed.

S&F PVC waste pipe 32mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed.

S&F Vitreous china wash basin angle back type of size 600 x 480mm white, excluding taps waste chain and plug orcelain stopper but including brackets, cutting and pinning in ends of brackets complete all as specified and directed.

S&F chromium plated fancy type pillar taps cast copper alloy with capstan head screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F brass CP towel rail , 60cm long between brackets and fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F stainless steel soap dish, approximate size 160x 160x90mm complete all as specified and directed.

Supply and fix 1000 ltrs capacity white colour triple layer, rotational moulded, polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fix 750 ltrs capacity white colour triple layer, rotational moulded, polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fix 250 ltrs capacity white colour triple layer, rotational moulded, polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F PVC (SWR) pipes type 'A' 100 mm dia double socket including fittings in any length with rubber ring joints fixed to wall including necessary clamp etc complete all as specified and directed.

S&F PVC (SWR) pipes type 'A' 100 mm dia double socket including fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) pipes type 'A' 75 mm dia double socket including fittings in any length with rubber ring joints fixed to wall including necessary clamp etc complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F PVC (SWR) pipes type 'A' 75 mm dia double socket including fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm PVC (SWR) branch pieces, junction single (single Y), equal or unequal complete all as specified and directed.

S&F 100mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F stainless steel white U Shaped wall mounted and floor mounted hand rail of size 600 x 100 mm complete all as specified and directed.

S&F stainless steel white wall mounted grab bar 600 mm long complete all as specified and directed.

S&F CP Jet spary butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.

S&F Brass chromium plated shower rose with or without swivel joints 100 mm size including fixing to 15mm bore pipe omplete all as specified and directed.

Supply laying & testing 150mm dia salt glazed stone ware drain pipes grade 'A' laid in trenches and jointed in cm 1:1 as specified complete all as specified and directed.

S&F 100mm bore UPVC Rainwater pipe (Sch-40) double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 100mm UPVC (SWR) bends any radius with access door complete all as specified and directed.

Construction of soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 2.4M dia X 3.00.0M deep complete all as specified and directed and all as shown in TD No. CEJZ/2004/TD/S-35 sheet No 1/1

M& L for septic tank of 25 user, with and including excavation in ordinary soil, foundation in PCC 1:2:4, Brick work in 1:4, RCC slab covers incl RCC precast manhole covers having 6mm plate embeded all around reinforced cover with angle iron frame vent shafts and sludge chambers complete all as specified and directed and all as shown in TD No. CEJZ/2002/TD/S-2 sheet No 1/1.

M&L for precast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab for drains, fair faces and set in cement mortor 1:4 including necessary from work complete all as specified and directed. Note: Reinforcement shall be measured & paid seperately.

M&L for Sand cushioning with clean dry fine sand unwashed 8 Cm thick before cable laying and 15Cm after cable laying including gently punning around cables complete all as specified & directed. Note : Punned thickness shall be measured.

M&L for brick covering to underground electric cable using sub class "B" old size brick laid dry flat per pendicular to the direction of cable complete all as specified and directed.

M&L for 50 mm bore GI pipe light grade laid in trenches or fixed to wall / pole for protection of cable / earthing strip etc complete all as specified and directed.

M&L for cutting existing tubing and taking up for tapping/termination of pipe line, screwing including existing steel tubing of size 15mm dia complete all as specified and directed.

Supply, jointing & testing steel water tubing, medium grade galvanised with and including necessary pipe fittings/accessories like sockets, unions tees, elbows etc and fixed to or concealed in walls and ceiling or laid in floors of nominal bore dia 20mm complete all as specified and directed

S&F 40mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty / wooden beading in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated unsheathed FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) drawn into and including rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories including anodised / Pressed steel terminal boxes 60mm deep and not less than 1.6mm thick for mounting switches, sockets, fan regulators etc duly painted on inside & out side two coats of black bituminous paint over a coat of red oxide primer with 3mm thick hylam sheet top cover complete for the following :-

One light / fan / exhaust fan controlled by one switch.

One 3 pin 5/6 Amp socket point outlet on the same board with other switch.

One 3 pin 5/6 Amp socket point outlet on the independent board.

One bell point controlled by one bell push.

S&F Socket outlet 2 in 1, 5 Pin 6 Amp multi purpose flush type 230 Volt complete all as specified and directed.

S&F Socket outlet 2 in 1, 5 Pin, 5 & 16 Amp multi purpose flush type 230 Volt complete all as specified and directed.

S&F switch piano flush button single pole one way 6 Amp 230 Volts grade complete all as specified and directed.

S&F bell push, flush type 6 Amp 240 Volts complete all as specified and directed.

S&F bell ding dong AC 240 Volts complete all as specified and directed.

S&F switch piano flush button single pole one way 16 Amp 230 Volt grade complete all as specified and directed.

S&F factory made and tested (MCB DB) TPN 4 way with 200 amps rated busbar 240 volts (double door type) sheet metal enclosure powder coated suitable for mounting the MCB 415/240 volt complete all as specified and directed.

S&F MCB with GI hardware fixed in DB's of the under mentioned type and rating of he following :-

MCB SP 240 volts 6-32 Amps C-Curve complete all as specified and directed.

MCB DP 240 volts 6-32 Amps C-Curve complete all as specified and directed.

MCB SPN 32/40 Amps, 240 volt C-Curve complete all as specified and directed.

MCB TPN 63 Amps, 415 volt C-Curve complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated unsheathed FRLS multistranded copper conductor cable 2.5 sqmm drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories to be terminated in pressed steel terminal boxes with 3mm thick backelite sheet top cover with earth continuty conductor with FRLS PVC insulated unsheathed single core multistranded copper conductor cable 2.5 Sqmm complete for one 3 pin 15 Amps switch socket combination controlled by one switch on independent board and making the good disturbed surface complete all as specified and directed.

M&L for point wiring with 4 Sqmm PVC insulated unsheathed FRLSH multistrand copper conductor cable 1100 votls grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including not less than 1.2mm thick sunke anodised pressed steel terminal boxes with back sheet and top sheet complete for mounting switches socket etc including 4 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 20 Amp point controlled by one switch on independent board complete all as specified and directed.

M&L for Sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 6 Sqmm copper cable multi stranded conductor drawn through in and including PVC rigid non metallic concealed conduit 25 mm dia, medium duty, ISI Marked to be terminated in DB box as per IS including of 6 Sqmm dia FRLS PVC insulated unsheathed Copper cable as earth wire connected to earth complete all as specified & directed.

Supply, laying, testing and commissioning of LT Underground XLPE insulated, screened PVC bedded galvanized steel strip armoured electric power cable (heavy duty) with aluminium conductor 11 KV grade (Earthed) of size 25 sqmm, 4 core confirming to IS-7098 Pt-II, cable laid in trenches /walls /ducts/ poles complete all as specified and directed.

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified and directed.

S&F factory made and tested sheet metal enclosure (MCB DB) SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated neutral bar and shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply and fix exhaust fan 300mm sweep Mettallic type alongwith louvers complete suitable to work on AC, single phase, 230 Volts, 1400 RPM , 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

S&F and commissioning (maximum energy efficient type) electric water heater storage type five star rating of capacity 25 liters, heating element capacity 2 KW, vertical, plastic body including grouting of studs in wall in CM 1:3 nuts, washers and including two numbers heavy duty flexible SS connection pipe of hot and cold of 600mm long with brass nut and for water supply connection complete all as specified and directed

M&L for laying on walls, floors and roof of pipes galvanized, "Medium Grade" complete including 15mm dia complete all as specified and directed.

S&F angle valve 15mm bore heavy duty fancy type chromium plated with long shank and cup concealed in wall complete all as specified and directed.

S&F stop valve screwed, supplied and installed complete including fittings of following size complete all as specified and directed.

40mm dia

25mm dia

S&F Pipes Galvanised Medium grade supplies and laid complete including fittings of following size complete all as specified and directed.

40mm dia

25mm dia

Supply, laying, jointing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire, PVC tape armoured heavy duty electric power cable with aluminium conductor, 1100 volt grade of size 16 sqmm 2 core laid in trenches wall / floor etc complete all as specified and directed. Note : Cable may be laid in trenches, under road, across the nallah, along poles/walls and ducts etc. Excavation, earthwork, sand chshioning, cable cover, pipe for cable protection to be measured and paid saprately.

S&F LED bulk head 10 W HEXA environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs with all connected accessories complete all as specified and directed.

S&F ceiling rose surface bakelite 63 x 30 mm three terminal ISI marked including suitable size of PVC board complete all as specified and directed.

S&F angle holder, insulated polycabonate body with black plate complete including 10 Watt LED lamp B22 lumens not less than 700 and output at 6500K colour temp complete all as specified and directed.

S&F security light of 30 Watt ENDURA CITY LITE PLATINUM PLUS or equivalent New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-65 protection and impact resistance of IK07 with 10KV built in surge protection device roadway luminaire with high power LEDs as light source and electronic driver including all fixing arrangements complete all as specified and directed. Make : Havells or equivalent item of other specified Makes.

S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1 Sqmm complete all as specified and directed.

S&F indoor decorative ultra slim surface / wall mounted T-5 LED batten tube light complete fitting 1x10 watt LED tube (size within 600 x 25 x 40mm) suitable for 2' long with polycarbonate diffuser & integrated electronic driver, energy efficient, 140V-270 volts complete with all accessories internally pre-wired and including connection up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways, MS handle 12mm dia for PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking out old existing earthing complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

S&F ceiling fan (white) of 1200 mm sweep, 5 star rating copper wound with super energy efficient BLDC motor including remot,connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor canopy set, down rod, shackle kit, including all standard accessories complete all as specified and as directed by Engineer -in-Charge . Model No- Efficiencia Neo Make:-Havells or equivalent in make listed as per Appx 'B' to particular specification.

Supply, jointing & testing steel water tubing, medium grade galvanised with and including necessary pipe fittings/accessories like sockets, unions tees, elbows etc and fixed to or concealed in walls and ceiling or laid in floors of nominal bore dia 25mm complete all as specified and directed

S&F indirect up-down light fitting for mirror and as wall light application ivory colour 9 watts LED 6000K including connecting up from ceiling rose/ connector block fitting complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Gupta Automobiles