REPAIR TO STEEL FURNITURE AND REPAIRING OF CHARPOY GI CHARPOY IP ALL TYPE CHARPOY HARD TOP UNDER UNDER GE(AF) SRINAGAR.

Amount

Note for All Items of This BOQ:- (i) Unless / otherwise specified in the BOQ size & material component of Furniture article shall be as shown in relevent Drawing (ii) Quoted Rates for Replacement of component of Furniture article shall be deem to include cast of two coat synthetic enamel paint over one coat primer / two or more coat sprit polishing to match with existing surface as mention in relevant drawing / directed by Engineer-in-Charge

Chair school / chair examination / chair TP (FD/E6 MAP)

S&F new seats PVC (blowplast/supreme/amco or equivlant) after removing old damaged seats fixing shall be done with approprate size screws and washers. Colour and pattern as approved by the engr in charge.

S&F new hand rest on the chair examination / chair school / chair with hand rest made out of 18 mm thick plank of Teakwood well seasoned and attached with pyno hingis shape and size as mentioned in drg.

Painting to the steel structure of the chair in two coats of best quality paint with best worksmanship.

Removing unserviceable part of Almirah large steel, Almirah 1/2 H 1/2 S, etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-Charge. [ FD-67(M), FD-103, FD114(M), FD-104(M) FD-350]

Leg made out 1.00 mm thick MS Sheet

Shelves made out of 1.00 thick MS Sheet a clip

Complete Locking device with adjustable rods and locking machanisim and lock

Door made out of 1.00 mm thick MS Sheet

Removing unserviceable part of Almirah medium steel, Etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-charge. [FD-67(M), FD-103, FD114(M), FD-104(M)]

Leg made out 1.00 mm thick MS Sheet

Shelves made out of 1.00 thick MS Sheet

Complete Locking device with adjustable rods and locking machanisim and lock

Door made out of 1.00 mm thick MS Sheet

Removing unserviceable part of locker bed side steel etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. (FD-1029)

Leg made out of 1.00 mm thick MS Sheet

Hasp & Staple MS CP

Door made out of 1.00 mm thick MS Sheet

MS CP Handle

S&F in repairs Chromium plated handle for Almirah any type. Fixing shall be done properly with washers and bolts with worksmanship. [FD-67(M), 83(M), FD-1032,FD-114(M), FD-104(M), FD-350(M)]

S&F in repairs steel lock with duplicate key (4 Liver). Make Godrej/Harison for almirah any type . Fixing shall be done properly with scres and key hole covers outside to the lock on the door leaf with worksmanship. [FD-67(M), 83(M), FD-1032,FD-114(M),FD-104(M), FD-350(M)]

Removing unserviceable part of Table office clerk steel, table typist steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer - in- charge [FD-84(M), FD-1004]

complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet

Locke 4 liver of drawer with duplicate Key

Removing unserviceable part of table officer steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. [FD-84(M), FD-1003 ]

complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet

Lock 4 liver of drawer with duplicate Key

Removing unserviceable part of table 3x2 and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. [ FD-1008 ]

complete Drawer box for table 3x2 with acessories as per Drg made out of 1.00 mm thick MS Sheet

Lock 4 liver of drawer with duplicate Key

S&F in repairs 18/19 mm thick Pre laminated particle board one side teak face and one side white lamination (ISI Marked) for different table tops of OTM steel furniture, of existing size and pattern with 4mm thick 18mm wide well polioshed Teak Wood beading etc all as directed. [FD-84(M)/ FD-1004/1003/ 1007/ 1008/1009/1018]

S&F in repairs MS Tube 25 mm Square, 16 Gauge welded to existing frame duly painted paint OG / Black/ silver/ white as required and as directed to match with the existing surfaces all as directed. [FD-84(M), FD-1004 /1003, FD-165, FD-1007/1008, FD-1018]

Dismantling, taking out carefully old existing broken table top of the table dinning ORs of Alm sheet top of any description, and replacement of the same with S&F new Table top 18 mm thick plain particle board both sides commercial ISI marke of medium desity, flat pressed single layer type withBWR adhesive ISI marked 1.9 mtrs long and 0.685 mtrs width with including top covered 0.63 mm thick almunium sheet on top with 25mmx12 gauge stainless steel screws, 28 Nos with suitable washers on top made to shape, fixed in position, all as shown drawings and specified and as directed by th Engineer-in - Charge [FD-165 (M)]

Repair to chair computer / Revolving /Chair Padded/ Chir revolving executive and all kind of revolving chairs [FD/E6/MAP/01/ /TP]

Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge.

Removing of unserviceable fabric, foam cushions of seat and back and upholstring of existing chair computer with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice Note : Min price range for cloth is Rs 200/- per mtr

Taking out Unserviceable base for chair and S&F new base complete in all respects as pe requirement and duly functional, all as specified and directed.

Removing of Unserviceable hand rest and S & F new hand rest of best quality as approved and required to make functional the chair

Replacement in Repair of padestal assembly as per sample available in BS Yard

S&F the PVC caster wheels pin type to the base of the chair revolving to make the chair and base proper functional.

S&F the PVC caster wheels Screw type to the base of the chair revolving to make the chair and base proper functional.

Book Case Steel [FD 1022 / TP]

S&F the glases of the shutters after removing the old damaged broken glasses. The glasses shall be fixed with proper gaskits and packings with full worksmanship.

S&F new locks to the shutters of the book case after remiving the old damaged locks.

S&F new shutters made out of MS sheet 1.00 mm thickness fabrcated to fix peoperly in the existing book case structure after removing old damaged shutters

Welding works to the steel furniture

Gas welding on the conduit and soft sheet surfaces with proper worksmanship, the welding shall be done in running hand welding joints.

Electric / Rod welding on the sheet surfaces with proper worksmanship, the welding shall be done in running hand welding joints.

Multipurpose Chair Cinema [TP]

Removing old damaged seats and back of the chair cinema and repairing and fixing the seats and back after replacing foam cushions of both seat and back and provideing foam cushion in shape,cloth leathertic (pattern and colour as approved) repairing the structure of the chair and making functional the forward / backword and sliding motion of the chair in smooth and noiseless.

Painting to the steel surfaces ( the paint shall be done with the existing shade matching with the furniture article) of the steel furniture items of any type with OG, black, White, silver or smoke grey colour paint after removing all kind of dents, un eveness and after prepration of all stell surfaces. Prepration included the cleaning of surface with emery paper and filling up of joints, sufraces with the steel putty and two coats of redoxide primer. the painting shall be done with two coats of best quality paint as directed by the engr in charge. The painting sahll be don to achieve the glossy look surfaces.

Almirah large steel [FD 1032/ FD MAP]

almirah med steel [FD 1031 / FD MAP]

Locker bed side steel [FD 1028]

book case steel [FD 1022 / TP]

table office clk steel [FD 1003]

table office offrs steel [FD 1002]

tepoy vdh

table 3x3

table dining ORS [FD 165/ 84 (M)]

Rack side 3/4 spaces

Removing existing old and unserviceable long rail from charpoy GI pipe and supply and fix new long rail of GI Pipe 32 mm bore medium grade ISI marked threaded at both end fixed in position complete all as directed and shown on drawing. [FD-220]

Removing existing old and unserviceable short rail of charpoy GI and fabrication and fixing of short rail by cutting and converting from long rail obtained vide Srl item No 18 here in before threading both ends complete all as shoiwn on drawing and as directed by Engr-in-Charge. [FD-220]

Removing existing old unserviceable legs from charpoy GI pipe and fabrication and fixing of legs by cutting and converting from short rails as obtained srl Item No 19 here in before cutting and threading at one end and supply and fixing MS plate 3 mm thick, 40 mm dia by welding at other and of legs including provision of two parellel MS clamps made of 25x3 mm flat iron duly welded for MNF set fixed in position and painted with two coats of synthetic enamel paint black over coat of red oxide primer complete as per Drg. [FD-220]

Removing existing old unserviceable GI check nut from the frame of charpoy GI 32mm bore and supplying and fixing of new check nut, fixed in position all as shown in drg and as directed by Engr-in-charge. [FD-220]

Removing existing unserviceabel GI elbow 32mm dia from the frame of GI charpoy and supply & fixing of new Elbow GI 32mm ISI Marked and fixed in position all as shown in drg and as directed by Engr-in-charge. [FD-220]

Removing exising old/ wornout/unserviceable 12mm thick ply top / MDF top from the top of charpoy GI 32 mm/ Charpoy IP , charpoy hard top etc and replacement of 12mm thick plywood (6ply) with single peice ply from long rail to longrail and short rail to short rail properly fixed by supply and fixing and make it fit with 6mm smooth head nut bolts with two nos washers or as directed in various drgs and as required in the furniture articles. [FD-220 / FD MAP]

M/S HARJEET ENTERPRISES

M/S ZAHOOR ENTERPRISES

M/S RATHER STEEL WORKS