MISC REPAIR TO BR NATURE WORKS SUCH AS ROOF TREATMENT WINDOWS VENTILATORS PLINTH PROTECTION FLOOR AND WALL TILING IN JCOSOR MD ACCN IN THE AREA OF AGE BR II UNDER GE WEST DELHI CANTT 10

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specially provided for including removal of old APP membrane and removing rubbish beyond (MOD land) complete all as specified and directed.

M&L for 30mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in leveling course complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on roof with liquid water proofing compound @ 200 ml per one bag of 50 Kg cement (or as per manufacturers direction), finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for applying a coat of bitumen primer confirming @ 0.50 ltr/ Sqm on prepared surface of plaster and applying a coat of hot blown bitumen 85/25 gde @1.2 kg/sqm and applying APP based Polymeric membrane minimum weighting 3.5kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt.not less than 150 gm/ sqm) and sealing joints by torched application applying a coat of semi hot blown bitumen 85/25 @0.50 kg/sqm over APP membrane and dusting over the bitumen coat.complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B0 using 12.5mm gradedaggregate as in beching,coving in chajja complete all as specified and directed.

Dismantling of loose concrete cover from all RCC members such as Wall, Column, beam, ceiling soffits of slabs, chajjas, fins, facia, parapets surface etc, derusting of steel reinforcement and preparing the surface by cleaning dirt etc and applying chemical admixture over reinforcement, plastering the surface in two layer using chicken wire mesh before applying first layer. First layer of rendering is done upto surafce of previous thickness of of concrete in CM 1:3 and second layer 10mm thick rendering in CM 1:3 and match with the existing surface. Note : 1. Rate quoted shall be inclusive of all scaffolding, props and shuttering, chicken wire mesh, chemical admixture and nothing payable on this account other T&P.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore including cutting chases, pinning in brick wall cutting n.exc 10 cm girth and making good to facings where required and pointing in CM 1:3 including taking down old GI tubing complete all as specified and directed.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore including taking down old GI tubing complete all as specified and directed.

M&L brick work built in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius including demolition of old brick work complete all as specificed and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including demolition of old brick work complete all as specified and directed.

M&L glazed ceramic coloured jointless wall tiles of size 300x450/ 300x600 mm 7 to 8 mm thick, in walls etc set and jointed in neat cement slurry and pointing in coloured cement to match over and including 10 mm thick in cement mortar (1:4) as screed plaster including with plaster, racking out joints hacking for key and washing down with water, dismantling of old tiles removing rubbish beyond MOD land complete all as specificed and directed.

M&L Non skid coloured ceramic tiles, joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including with plaster, racking out joints hacking for key and washing down with water, dismantling of old tiles removing rubbish beyond MOD land complete all as specificed and directed.

M & L for 600x600x 8 mm thick vitrified tiles of approved colour laid in floors set and jointed in neat cement slurry and painted in coloured cement to match over and including 15mm thick screed bed or bedding layer in cm 1:6 including roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed

M & L for 600x600x 8 mm thick vitrified tiles of approved colour, laid in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed or bedding layer in cm 1:4 including with plaster, racking out joints hacking for key and washing down with water, dismantling of old tiles removing rubbish beyond MOD land complete all as specificed and directed.

S&F in repair vitreous china water closet pan orissa pattern long pan size 580mm x 440mm white with integral foot rest "P" or 'S" trap front or back inlet (excluding flush cistern and flush pipe) and removing beyond MOD land complete all as specificed and directed.

S & F in repair vitreous china wash hand basin (WHB) white, including provision of pair of mild steel angle iron bracket of suitable size duly painted, 32 mm dia chromium plated waste coupling , PVC waste pipe and cutting for pinning in ends of brackets in wall etc of size not less than 550mm x 400mm etc removing rubbish beyond MOD land complete all as specified and directed.

S&F in repair PVC flushing cistern 10 Ltrs capacity white valveless, syphonic action type flushing cistern, low level with inlet ball valve, float and handle, pipe fixed with PVC rawl plug & screws complete all as specified and directed.

S&F in repairs PVC connection of 450mm long and 15mm size with brass nuts complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.

S&F in repair stainless steel/chromium plated grating 100 mm dia with waste hole, complete all as specified and directed

All as per item No. 20 above but without waste hole

S&F in repair angle valve 15mm bore dia cast copper alloy fancy type, screwed down, high pressure with capstain head handle, chromium plated for iron pipe or unions complete all as specificed and directed.

S&F in repair bib taps short body 15mm bore cast copper alloy with crutch or fancy type screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed .

S&F in repair CP bib taps long body 15mm bore cast copper alloy with crutch or fancy type handle complete all as specified and directed .

S&F in repair arcylic glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed .

S&F in repair 5.5mm thick sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed.

S&F in repairs chromium plated brass overhead shower rose 125mm size swivel type with long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed .

S&F in repair 3mm thick ordinary sheet glass fixed with clips and putty complete in squares/rectangular not exc 0.50 Sqm each pane all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple ( for wooden & steel windows/doors ) complete all as specified and directed .

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling and including removal of demolished material beyond MOD land complete all as specified and directed.

M&L5 mm thick rendering of ready mix mortar of approved make (having ration equivalent to CM 1:3) of ceiling surface finished fair even and smooth without using extracement as whole or in patch complete all as specified and directed.Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE.

M&L15 mm thick rendering in cm 1:6 internal face of wall finished fair even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on external face of walls finished even and smooth without using extra cement complete all as specificed and directed.

M & L for preparation of newly plastered surface of ceiling and applying two coats of Oil Bound Distemper over a coat of wall care putty to uniform smooth surface not more than 1mm thick over a coat of primer complete all as specified and directed .

M & L for preparation of new surfaces (plastered or un-plastered) of walls including cornices/pillars etc. by brooming down and applying two coats of Oil Bound Distemper over a coat of wall care putty to uniform smooth surface not more than 1mm thick over a coat of primer complete all as specified and directed .

M&L for preparation of new surfaces (plastered or unplastered) of walls including cornices/pillars etc. by brooming down and applying two coats of cement base paint over a coat of primer complete all as specified and directed

M&L for preparation of old surface of ceiling and applying one coat coat of Oil bound distemper on ceiling surface with brushes (two horizontal strokes immediately followed by two vertical stroke constitute one coat) complete all as specified and as directed.

M&L for applying two coats of Oil Bound Distemper over a coat of primer over a coat of sanded prepared surface of wall care putti min 1 mm thick over prepared wall surface (old painted surface) prepared with sanding machine complete all as specified and directed.

M&L black granite 16 to 18 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms size of slab not exceeding 1.5 sqm each including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including screed bed of 20mm thick in cement mortar (1:6) including rubbing and polishing and demolition of stone slab complete all as specified and directed.

Half moulding of black granite edge with grinding and polishing etc complete all as specified and directed.

S&F 20 mm dia stainless steel tube for curtain rod including pair of suitable S.S brackets and finals approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.

S&F 100 mm dia cast iron water socketed pipes with or without ears with lead joint laid in trenches/floors or fixed to walls including taking down old CI pipe complete all as specified and directed.

S&F in repair cast iron bends, elbows, Tee with or without door plate, etc of 100mm dia or diminishing pieces or tapers with lead joint laid (larger bore measured) complete all as specified and directed.

S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent pipe in any length, with or without ears with lead joint laid in trenches/floors or fixed to walls including taking down old CI pipe complete all as specified and directed.

S&F in repair cast iron bends, elbows, Tee with or without cover plate, etc of 75 mm dia or diminishing pieces or tapers lead joint (larger bore measured) complete all as specified and directed.

M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F factory made 35mm thick 2nd class hard wood plain framed panelled door shutter two pannels with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces .The size of rail and style as per IS1003 part chemically pressure treated complete all as specified & directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beading etc complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F fibre glass reinforced plastic (FRP) factory made door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & drawing complete all as specified and directed.

S&F FRP factory made door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specification & drawing and as directed complete all as specified and directed.

S&F 100mm size extruded aluminium handle, fabricated type anodised complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod pattern spring including roller plate complete all as specified and directed.

S&F 100 mm long (size) stainless steel butt hinges, medium weight, cold rolled complete all as specified.complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200 mm long, extruded section complete all as specified and directed.

S&F in repair 19/20 mm thick Medium Density Fibre board (MDF), Pre laminated exterior grade both side laminated board fixed to frame as in shutters to cup boards and kitchen cabinet etc including 19/20 x 2mm lipping/ beading all round shutters complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel bright finished or electrogalvanised , width of flap (when open) 30 mm complete all as specified and directed.

S&F Magnet Catcher of standard size and quality as in kitchen cabinet complete all as specified and directed

S&F 40mm dia stainless steel cupboard knobs fixed with nuts, screw and washer of mild steel, bright fnished complete all as specified and directed

S&F in repair floor door stopper of aluminium 140mm overall length of cover plate alloy body and tongue, anodised , with hard drawsteel spring , fixed in floor complete all as specified and directed.

S &F in repair aluminium door seal having Rubber strips (size 50mm wide) complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified and directed.

Taking down shutters of any description exceeding 1 square metre and not exceeding 2 square metre each complete complete all as specified and directed.

Taking down shutters of any description exceeding 2 sqm each and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description exceeding 1 square metre and not exceeding 2 square metre each and refixing in the same opening complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section size (section 127x38.10x1.74mm) @ 1.518 Kg/RM for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for powder coated aluminium hollow section for 3 track sliding window with window frame and two glazed shutter and one nos glazed wire gauged shutter sliding type with aluminium section weighing 0.55 Kg/mtr with 3 track for sliding window with framed shutter including aluminium alloy powder coated snap typed beads, handle aluminium glazing clips, cleats, rubber gasket etc including 4 mm thick tinted glass of superior quality and all standard fittings viz . runner, locking arrangements complete all as specified and directed.

M&L for aluminium powder coated ventilator, bottom portion fixed type and upper portion have louver type glass without sash bars with aluminium section of weight not less than 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc. complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with aluminium beads in square n exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50 mm with square tube solid 6 mm thick including aluminium channel of suitable size thickness of channel 1.5 mm complete all as specified and directed.

M & L for framed work such as grills, grating hold fasts etc with ends of bars shouldered or riveted, framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work conforming to Fe - 290 Ge E-165 etc complete all as specified and directed.

S&F rolled section as in framing for door/window/vent /CB chowkats/kitchen cabinet supporting/window grill welded frame of angle or other section and the like fixed with angle cleat and connecting plates including welding of butt hinges and similar work confirming to Fe - 410-0 or Fe - 310 - 0 cooler stand shall be fitted upto 2 storey height complete all as specified and directed.complete all specified and directed.

S&F 2 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F CI floor trap long arm with grating including jointing to waste pipe in run lead with dia of outlet 75mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and directed.

S&F in repair brass chromium plated steel tubular towel rail 20mm dia 'D' type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed.

Demolition of Cement Concrete (un reinforced) in ground floors and pavings n exc 15 cm thickness including rubbish off beyond MOD land complete all as specified and directed

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for cement screed bed or bedding layer on floor of mortar 20 mm thick in CM 1:6 complete all as specified and directed.

M&L chequered cement concrete tiles 30cmx30cm 25mm thick coloured , set jointed and pointed with grey cement and pigments in neat cement slurry in floors complete all as asecified and directed.

S&F in repair 15mm dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends and conceled for iron pipe or for unions and fixed complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20 to 25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing over and including 20mm screed bed in CM 1:6 including dismantling of existing tiles or cement mortar beddding of any thick ness complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in cluding dismantling of old sheet any type including removing of rubbish beyond (MOD) land complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces complete all as specified and directed.

M&L for preparation of old steel surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coats of red oxide primer including removing of existing paint with paint remover or suitable chemical complete all as specified and directed.

Attending and rectify day to day complaints of different type blockage of WC, Gully trap, bathroom, WHB, kitchen traps, Cleaning and maintenance of all rain water pipes, PVC/soil/wastage pipe running on external walls of bldgs including junction holes of any descriptions of all the mud/slude and getting out, washing thoroughly grating of trap, CI waste pipes by opening the clearing eye and deposting the sludge in a pit of suitable size at a distance not exceeding 50 meters from the gully trap and covering the same with the soil obtained from excavation of pit including all excavations and earthwork complete all as specified and directed etc system functional on all working days from 0900 hours to 1700 hours with T&P (such as Bamboo, cleaning rod and suitable materials/ tools) GI wire, PHAWADA, Bucket, Spikes etc incl necessary form work/scaffolding and safety measure which shall be deemed to be included in unit rates quoted by the contractor.

Note for Item No. 93 above :- (i) The complaint shall be attended & defect shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding sunday & gazetted holiday, commencing from date and time as notifying in the complaint slip failing which a penalty @ Rs.120/-per complaint per day (08 hrs) shall be levied imposed on the contractor and necessary recovery shall be made from contractor's dues on this account. (ii) Contractor or his supervisor will report daily at 0900 hrs at FAFA Accn Complaint Cell, OTM Accn Complaint Cell and Vikram Batra Vihar Complaint Cell for collection of complaints from the concerned JE's In charge, in case after checking & attending the defects, it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of Engineer in charge by the contractor/ his rep immediately. If Engineer in charge is satisfied with contractor's view, no recovery will be made on this account. However complaints related to sewage shall be attended on very next day whether it is 'Sunday' or 'Gazetted Holidays' and nothing extra shall be payble to contractor on this account. (iii) Contractor or his supervisor shall also distribute all complaint / detailing to tradesmen, monitoring the work and taking the complaint slip from trademans everyday and re-submit the same at each complaint cell of day to day complaint. If Contractor or his supervisor fails to attend each complaint cell, recovery of Rs 1000/- per day for each complaint cell shall be recovered from the contractor's account.

(iv) Contractor shall arrange suitable T&P (such as KHAPACHI, GI wire, PHAWADA, Bucket, Spikes,die set,sewage pump die set (1/2" to 1") washers of all size, safeda, thread (soot), M-seal, screws, nails etc including necessary form work/scaffolding and safety measure complete all as specified and directed. (v) In addition to above, Contractor shall arrange mechanical rodding with vibrating/ drilling concept i.e trolley mounted sewer cleaning machine as and when required as directed (Minimum once in 03 months) for cleaning entire sewage system and make free of any sludge/ blockage. (vi) The above all aspects shall be deemed to be included in the quoted rate of the respective item and Nothing extra shall be payble to contractor on this account.

M&L for Cleaning of sewage line including connected manhole, upto depth of 6.0 metre by using high pressure super sucker machine vehicle mounted jetting cum suction unit to be capable of air lifting of dense waste/ sludge like mud slurry, small stones, debris, grit etc from sewer lines, through vacuum mode and capable of jetting sewer lines of dia 150mm to 450mm consisting of a water tank having volumetric capacity of 5000 ltrs, including skilled driver and operator for supervising of cleaning of sewage line and also required water for jetting and removal of sludge/ silt/ liquid/sewage water/mud , sand etc. from out side of MD premises, including removing and refixing of manhole covers, complete all as specified and directed. Note:- 1. Contractor shall arrange water for jetting, refilling of tank including labours required to be engaged in the work and rubbish off the sludge beyond MD land. 2. Cleaning of Sewage line and connected manholes shall be done after making all safety arrangements and only after making sure that their is non presence of foul gases such as methene etc in the manhole.

Taking out manhole cover slab, cleaning of manholes depth upto 1.5 mtr by removing all silt, mud, sludge, any other materials, flushing with water to ensure clean, reset the manhole cover in same position after cleaning and testing, removal of spoils/sludge out side MD land complete all as specified and directed. Note : Cleaning of manhole under this item shall be paid only those manholes which are not connected with sewage line.

Taking out manhole cover slab, cleaning of manholes depth exc 1.5 mtr upto 4.5m by removing all silt, mud, sludge, any other materials, flushing with water to ensure clean, reset the manhole cover in same position after cleaning and testing, removal of spoils/sludge out side MD land complete all as specified and directed. Note : Cleaning of manhole under this item shall be paid only those manholes which are not connected with sewage line.

Deduct Credit: for demolished/dismantled material of (-) Rs 132910.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

M/S Yamin

Vipul Construction

M/S Laxmi Construction

Adhunik Builders

R S CONSTRUCTION CO

B. S BUILDERS

M/s M M BAHL