Construction of link road Kohli to Pucca Bharo road km 0/0 to 9/0

Manufacturing and erection of overhead signage system of cantilever shape make of 150 NB dia MS circular hollow section with clear height of 6m (Six metre) from the bottom of top section made of 65 NB (M) and 25 NB (M) circular hollow section, jointed with 2 Nos. of 80cm x 80cm (Eight centimeter into eighty centimeter) of 8mm (Eight millimetre) MS plate fastened with 8 Nos. fastened of 25mm (Twenty five millimetre) and base plate of 90cm x 90cm (Ninety centimeter into ninety centimeter) of 10mm (Ten millimetre) thickness supported by stiffener of 4 (Four) Nos. , 8 (Eight) Nos. thickness retro reflective signage on both side with size of 6m x 1.20 m (Six metre into one point two zero metre) with retro reflective sheeting over aluminum composite panel sheet with thickness of 3mm (Three millimetre), supported on angle frame 35x35x4mm (Thirty five into thirty five into four millimetre) on top section in desired shade of Engineer-In-Charge. Erected at site on pedestal of cement concrete 1:2:4 (One cement : two sand : four aggregate) with 12 (Twelve) Nos. foundation bolt of 25mm (Twenty five millimetre) dia as per IRC specification with all lead and lifts complete in all respect including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.