Construction work of Anganwadi Centre in Badi Bachawali of Baragaon development block of District Jhansi.

2.6.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

Providing and laying in position cement concrete in Foundation 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding in Super Structure. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 4.1.2

6.34.1 Brick work with nonmodular fly ash bricks confirming to IS:12894, class designation 10 in foundation. Cement mortar 1:4 (1 cement : 4 coarse sand)

Earth work and filling with cartage 5 Km. distance including loading, unloading, levelling and dressing etc complete.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, including the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 4.2.2

6.32.2 Brick work with clay fly ash bricks (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With F.P.S.(non modular) bricks :

6.45.2Half brick masonry with (non modular) fly ash bricks of class designation 10 confirming to IS:12894 in sup structure above plinth up to floor V level 1:4 (1 cement : 4 coarse sand)

10.31Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 40x40x6mm, joints mitred and welded by angle iron 40x40x6mm or 40x 6 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.