Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-01₹9.9 LAccepted-AOC | L-01 | Accepted-AOC Being lowest | |
| 2 | L-02₹10.4 L+₹7,448.80 (0.72%)Rejected-Finance | L-02 | Rejected-Finance Not being lowest | |
| 3 | L-03₹10.5 L+₹10,066.95 (0.97%)Rejected-Finance | L-03 | Rejected-Finance Not being lowest | |
| 4 | L-04₹10.5 L+₹10,251.51 (0.99%)Rejected-Finance | L-04 | Rejected-Finance Not being lowest | |
| 5 | L-05₹10.6 L+₹28,318.60 (2.74%)Rejected-Finance OPPOSITE GHOOM DRC PO GHOOM DISTT DARJEELING WB PIN 734 102 | DARJEELING | WEST BENGAL | 734102 | L-05 | Rejected-Finance Not being lowest |
Tender Value
₹9.3 L
EMD Value
₹18,600
Closing Date
9 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Darjeeling
P.O. Jalapahar Dist- Darjeeling (WB) Pin- 734103
REPAIR REPLACEMENT OF EXTERNAL WATER SUPPLY SYSTEM CLEANING OF WATER RESERVOIRS AT LEBONG UNDER AGE I DARJEELING
2022_MES_535526_1
8959/E8
Open Tender
Civil Works
Item Rate
182 days
AGE (I) Darjeeling
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
AGE (I) Darjeeling
₹18,600
Yes
25 Aug 2022
4 Jul 2022
11 Aug 2022
4 Jul 2022
9 Aug 2022
19 Jul 2022
4 Jul 2022 - 11 Jul 2022
60 days
Amount
Excavation in Trenches, not exc. 1.50 Metre wide and not exc 1.50 Metre in depth for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.
Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.
M&L for cutting existing road/hard standing not exc 45x45cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finished suraface of depth not less than 10 cm from top using PCC 1:3:6, type C-2 (using 40mm graded aggregate); including removal of surplus soil complete all as specified and as directed.
Taking down / out old unserviceable GI tubing upto 20mm bore (dia) including all fittings and fixture from floor/wall or trenches including cleaning and stacking for refixing / reuse and removal unusable materals from site of work complete all as directed.
All as per ser item No 05 above but 25 mm bore of pipe complete all as specified and as directed.
All as per ser item No 05 above but 40 mm bore of pipe complete all as specified and as directed.
All as per ser item No 05 above but 50 mm bore of pipe complete all as specified and as directed.
All as per ser item No 05 above but 80 mm bore of pipe complete all as specified and as directed.
S&F 20mm bore (dia) GI tubing 'medium grade' galvanised with all fittings laid in trenches, complete all as specified and as directed.
All as per ser item No 10 above but 25 mm bore of pipe complete all as specified and as directed.
All as per ser item No 10 above but 40 mm bore of pipe complete all as specified and as directed.
All as per ser item No 10 above but 50 mm bore of pipe complete all as specified and as directed.
All as per ser item No 10 above but 80 mm bore of pipe complete all as specified and as directed.
S&F 20mm bore (dia) GI tubing 'medium grade' galvanised with all fittings fixed to wall, ceiling or laid in floor, complete all as specified and as directed.
All as per ser item No 15 above but 25 mm bore of pipe complete all as specified and as directed.
All as per ser item No 15 above but 40 mm bore of pipe complete all as specified and as directed.
All as per ser item No 15 above but 50 mm bore of pipe complete all as specified and as directed.
All as per ser item No 15 above but 80 mm bore of pipe complete all as specified and as directed.
S&F in-repair of GI Flange of size 80mmm bore,threaded type, ISI marked, with and including nut-bolt, washer, gasket, etc., complete all as specified and as directed.
S&F of 20 mm bore (dia), gun metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778 and including taking out old unserviceable gate valves complete all as specified and as directed.
All as per ser item No 21 above but 25 mm bore of pipe complete all as specified and as directed.
All as per ser item No 21 above but 40 mm bore of pipe complete all as specified and as directed.
All as per ser item No 21 above but 50 mm bore of pipe complete all as specified and as directed.
Supply & Fixing , jointing and testing of cast iron sluice Valve ISI mark (PN-1.6) of size 80 mm bore confirming to IS 14846-2000, flanged ends drilled having brass spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets including taking out old unserviceable sluice valves, complete all as specified and as directed.
Supply & fixing Cast Iron Air Release Valves (ARV) with single air Outlets, conforming to IS 14845 of size 40 mm dia bore and fixing up in Cast Iron Water supply mains of size 40 mm dia including taking out old unserviceable CI ARV all as specified and as directed.
All as per ser item No 26 above but 50 mm bore (dia) ARV suitable for Cast Iron Water supply mains of size 50 mm dia complete all as specified and as directed.
All as per ser item No 26 above but 80 mm bore (dia) ARV suitable for Cast Iron Water supply mains of size 80 mm dia complete all as specified and as directed.
M&L Cutting existing GI water tubing of size 25 or 32 mm bore for alternations or addition including screwing/threading and jointing with suitable size GI socket complete all as specified and as directed by the Engineer-in-Charge.
M&L Cutting existing GI water tubing of size 40 or 50 mm bore for alternations or addition including screwing/threading and jointing with suitable size GI socket complete all as specified and as directed by the Engineer-in-Charge.
Taking out old unserviceable/corroded out valve pit MS cover of valve pit size 90cm x 90cm (LxB) and replace same with new valve pit cover made of 3.15mm thick MS black sheet welded to 40 x 6mm equal angle at sides and diagonals including 40 x 6mm equal angle for making resting base frame, both resting frame and cover should be hinged at two points along one side, including applying two coats of Synthetic enamel paint over a coat of red oxide primer on all around of MS Sheet and angle iron with providing necessary locking arrangement and handle, all as directed by Engr-in-charge.
Supply & Fixing , jointing and testing of cast iron Non Return Valve (NRV) ISI mark (PN-1.6) of size 80 mm bore, without bypass arrangement, swing type, conforming to IS-5312, complete with nuts, bolts, washers and gaskets including taking out old unserviceable NRV, complete all as specified and as directed.
Demolition of Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.
M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, staging of MS/PVC storage tanks, repairs to pathways etc. including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed.
S&F in-repair of Rotational Moulded Polyethylene Water Storage Tank 2000 Litre capacity (Cylindrical Vertical with Closed Top), 3 layered, hoisted and fixed in position with and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 142gm), all as specified in MES Schedule Part-I, complete all as specified and as directed.
Supply only Calcium based granular disinfectant for water treatment, more stable than Chlorine Gas and Stronger than bleaching powder (Calcium Hypochlorite), with following specifications: Chemical Name- Calcium Hypochlorite. Common Name- Stable Bleaching Powder/ High strength Bleaching Powder. Appearance- Dry free flowing and free from lumps. Toxic & Undesirable Substance- Should not induce substances beyond acceptable limit as given in IS: 10500 (2012) in treated and disinfected water. Packing- 20-25 Kg Bags/ 40-45 Kg Drums. Packing in drums is preferable to reduce fire hazard in places of high ambient temperature. Available Chlorine- 65% by mass (min). Stability- 1/15 Loss of Chloride on basis of available chloride (max). Particle size (Passing through 1.70mm IS Sieve)- 99.50% by mass (min). Water insoluble matter- 6% (max). Calcium Hydroxide- 4% (max). Sodium Chloride- 15% (max).
Collecting the sample of water from Jhora pump house and Kalimata pump house and testing of water for iron, PH value, TDS, colour, Total Alkalinity, Total Hardness, trubidity, chloride,Chlorine, fluoride, Nitrate, Copper, Total Coliform, Faecal Coliform, arsinic test and submitting the test report from reputed laboratory as directed by Engineer-in-Charge. Note : Testing shall be carried out quarterly as directed by Engineer-in-Charge.
M&L for repairing of leakage pipe line after disconnecting near by joint, including cutting existing GI water tubing of any size and any description for alterations or addition including screwing/threading, jointing and replacing with suitable size GI short piece and fittings as required at site, complete all as specified and as directed by the Engineer-in-Charge. Note: required fitting/short pieces will be paid and measured under relavent items here in after.
Supply only 20mm dia GI Union, Medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 25mm dia GI Union, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 40mm dia GI Union, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 50mm dia GI Union, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 80mm dia GI Union, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 20mm dia GI Nipple, 100mm long, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 25mm dia GI Nipple, 100mm long, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 40mm dia GI Nipple, 100mm long, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 50mm dia GI Nipple, 100mm long, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 80mm dia GI Nipple, 100mm long, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 20mm dia GI Socket, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 25mm dia GI Socket, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 40mm dia GI Socket, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 50mm dia GI Socket, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 80mm dia GI Socket, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 20mm dia GI Equal Tee, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 25mm dia GI Equal Tee, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 40mm dia GI Equal Tee, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 50mm dia GI Equal Tee, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 20mm dia GI Elbow, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 25mm dia GI Elbow, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 40mm dia GI Elbow, medium grade, ISI marked, complete all as specified and as directed.
All as per ser item No 39 above but for 50mm dia GI Elbow, medium grade, ISI marked, complete all as specified and as directed.
M&L for cleaning of Semi-underground water reservoir of capacity 50000 gallons at Lebong pump house by following methods.- (a) Draining out reserved water by opening drain out valve/ dewatering system. (b) Removing all scale, dirt, mud inside the tank by using TERBACK G10 Chemical and scrubbing the wall of tank. (c) Cleaning indide surfaces of the tank with fresh water by high speed jet pump. (d) First bacteria screening for sterilisation by using TERBACK G5. (e) Cleaning the floor of the water tank by heavy duty industrial vaccun cleaner. (f) Second bacteria screening for sterilisation by using UV rays. (g) Third bacteria screening for sterilisation by using TERBACK G65. Note: (i) On completion sterilisation certificate to be submitted to the Engg-in-Charge. (ii) Re-writing the letter not exceeding 25 cm in high as 'Tank cleaned on indicating date,month and year of cleaning with synthetic enamel paint white in colour on black background. (iii) The quoted unit rate is included for removal of mud, grits & deposits etc properly from site of work.
All as per ser item No 62 above but for Semi-under ground RCC water reservoir of capacity 30000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for Semi-under ground RCC water reservoir of capacity 25000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for Semi-under ground RCC water reservoir of capacity 10000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for Semi-under ground RCC water reservoir of capacity 5000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for Steel water reservoir of capacity 30000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for Steel water reservoir of capacity 9000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for Steel water reservoir of capacity 5000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for RCC water reservoir of capacity 4000 Gallons, complete all as specified and as directed.
All as per ser item No 62 above but for PVC water reservoir of capacity 10000 Litres, complete all as specified and as directed.
All as per ser item No 62 above but for PVC water reservoir of capacity 5000 Litres, complete all as specified and as directed.
All as per ser item No 62 above but for PVC water reservoir of capacity 2000 Litres, complete all as specified and as directed.
M&L for Fresh Gravel of size 40mm to 25mm suitable for drinking purpose (as approved), filling in the Filter Bed of Pressure Filter after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed.
M&L for Fresh Gravel of size 20mm to 15mm suitable for drinking purpose (as approved), filling in the Filter Bed of Pressure Filter after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed.
M&L for Fresh Gravel of size 12mm to 10mm suitable for drinking purpose (as approved), filling in the Filter Bed of Pressure Filter after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed.
M&L for Fresh Gravel of size 6mm to 2mm suitable for drinking purpose (as approved), filling in the Filter Bed of Pressure Filter after washing, cleaning, removing dust, dirts, etc. in layers, complete all as specified and as directed.
M&L for Fresh Sand of size 0.45mm to 0.70mm and co-efficient of uniformity shall be between 1.3 to 1.7 and Silica content should be not less than 90%, filling in layers in the Filter Beds, complete all as specified and as directed.
M&L for anthracite compound (Carbofilt of RMCO) of size 25mm to 12mm suitable for removing turbidity and bad odour from raw water, complete all as specified and as directed.
Supply only PVC Strainer for pressure filter, complete all as specified and as directed.
M&L for Painting to Internal Surfaces of Pressure filter Chamber, of Filteration Plant capacity 7500 Gallons with Two Coats of Black Bituminous Paint (Lead Free) suitable for Drinking Water purpose including necessary surface preparation by means of scraping, brushing, cleaning, complete all as specified and as directed.
M&L for Painting to External Surfaces of Pressure filter Chamber, of Filteration Plant capacity 7500 Gallons with Two Coats of Synthetic Enamel Paint (1st Quality) of approved colour including necessary surface preparation by means of scraping, brushing, cleaning, complete all as specified and as directed.
M/S TSHERING BHUTIA
RAI CONSTRUCTION
KWOK YING CHIU
Damdoo Bhutia
BIMAL BHATTRAI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .