REPAIRS TO MANGALORE TILE ROOF, FLOORING, JOINERY AND PLUMBING IN SERVANT QTR IN OMQ AREA AT AF STN PUNE

Amount

Taking down doors frame with shutters (without taking of shutters from the frame ) of size exc 1.5 Sqm but n. Exc 4.0 Sqm each from brick/stone walls complete all as specified and directed.

Taking down window/ventilator frame with shutters (without taking of shutters from the frame) of sizes n. Exc 1.5 Sqm each from brick/stone walls complete all as specified and directed.

Taking down shutters of sizes Exc 1.00 Sqm but n. Exc 2.00 Sqm each from brick/stone walls complete all as specified and directed.

Forming jambs, etc, to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM (1:4) complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, Framed work in any position complete all as specified and directed.

Material and labour Second class hard-wood clean sawn as in scantlings fixed in framed work complete all as specified and directed.

Supply and fix rolled mild steel as roof trusses (framed) purlins (angle, beam, tee channel) incl distance piece, cleats etc of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking/removing existing tar felt treatment from RCC roof slab/terrace by means of MS scrappers patty or any other suitable tools and removing debris to a distance exc 1.5 KM but n;exc 5 KM from the starting point and deposited where directed complete all as specified and directed.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Raking out joints/pointing cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed.

M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course CM 1:4 complete all as specified and directed.

M & L rendering bed 15 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC @ 3% by wt of cement complete all as specified and directed.

M & L providing & laying APP (Atactic, polypropylene polymer) modified water proofing membrane with non woven polyester reinforcement 3mm thick, not less than 3.60 kg per sqm over a coat of bitumen primer for bitumen membrane @ 0.3 litre per sqm including a top coat of bituminous aluminum paint @ 100 gram per sqm complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with glazing bars complete all as specified and directed.

Ditto all as per Ser Item no 19.00 above but without gazing bars complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges ,steel peg stay complete all as specified and directed.

Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and directed.

M & L for 3 mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm complete all as specified and directed.

S & F for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M & L for preparing surfaces of wood and wood based materials new of any description and girth not otherwise described and treating with tar or coal tar black paint at ends of post back of chowkats etc area tarred exc. 0.10 Sqm but n.exc 0.50 Sqm each complete all as specified and directed .

M & L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in copings, bands ,for hold fast and back filling etc. complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core with block board core and plywood face panels complete all as specified and directed.

S & F 35 mm thick second class soft wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with out sash bars ) edges for receiving glass etc sizes of members of shutter as specified in SSR Part I section 8 clause 8.20 (a) s. complete all as specified and directed.

Preparing new wooden surfaces any description exc 10 cm width/girth and applying two coats of synthetic enamel paint any shade over a coat of pink primer complete all as specified and directed.

Ditto all as per Ser Item no 29.00 above but in old surfaces applying one coat of synthetic enamel paint complete all as specified and directed.

S & F for MS butt hinges med. Wt. cold rolled ,and fixed 100 mm size complete all as specified and directed.

S & F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminiumalloy and fixed length of bolt 300mm complete all as specified and directed.

S & F Aluminum anodized handle Cast type 150 mm size complete all as specified and directed.

S & F Aluminum anodized or powder coated tower bolts 150 mm length complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for framed work such as grills or railing in design pattern etc with ends of bars shoulders rebated or forged in to spick confirming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 500 ltr capacity rotational molded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified. Including Dismantling water tanks and removing to store complete all as specified and directed.

S&F 20 mm bore ball valves high pressure PTMT with epoxy coated rod complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness below or above ground level complete all as specified and directed.

M & L for 40mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in floor finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

S & F for glass dividing strips, 3mm thick and width of strip 38 mm. complete all as specified and directed.

M & L for rendering 15mm thick on brick work or concrete surface in CM 1:6 finished surface even and smooth with applying sagol finish. Finish even and smooth (with out using extra cement ) complete all as specified and directed.

M & L for rendering 15mm thick on brick work or concrete surface in CM 1:4 finished surface even and smooth with out using extra cement complete all as specified and directed.

M & L for preparing new plastered surfaces and applying two coats of dry distemper on wall surface complete all as specified and directed.

M & L for preparing old plastered surfaces and applying one coats of dry distemper on wall surface complete all as specified and directed.

M & L for preparing new plastered surfaces of wall of any description with applying three coats of white wash on walls complete all as specified and directed.

M & L preparation of new steel surface of any description over 10 cm in width or girth, not other wise described with two coat synthetic enamel (ordinary tint) enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type D2 using (40mm graded aggregate) as in for plinth protection complete all as specified & directed.

Demolition of brick work, PCC block masonry, stone masonry or boulder masonry built in cement mortar complete all as specified and as directed.

M & L for pre-cast cement concrete block masonry Type C-I 1:3:6 (20 mm graded aggregate) with solid block ,exc 10cm in width and set in cement mortar 1:6 complete all as specified and directed.

Dismantling / taking up or down GI tubing and connections including cleaning for refixing or removal to store bore of pipe 15mm complete all as specified and directed.

Ditto all as per Ser item no. 51.00 above but 20mm dia complete all as specified and directed.

S & F GI tubing medium grade galvanized with all fitting laid in trenches of fixed to walls or ceiling or laid in floors. Bore of tube 15mm.

Ditto all as per Ser Item no. 53.00 above but bore of tube 20mm.

Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore complete all as specified and directed.

Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore complete all as specified and directed.

R k construction

santulan & Company

Smruti Construction

M/S DSSK ENGINEERING AN DCONSTRUCTION