PROVN OF TOILET BLOCK NEAR BLDG NO P 630 INCL ADDN/ALTN TO DRINKING WATER POINT AT TRG AREA AND OTHER ALLIED EM WORKS AT GMS UNDER GE I GOS

Amount

Surface excavation n.exc 30 cm deep and getting out in hard / dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceedinf 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M & L Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L reinforced cement concrete (Design mix M-25) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L reinforced cement concrete (Design mix M-25) using 20 mm graded stone aggregate as inColumns, pillars, piers, posts and struts complete all as specified and directed

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L reinforced cement concrete (Design mix M-25) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L reinforced cement concrete (Design mix M-25) using 20mm graded stone aggregate as in Chhajja complete all as specified and directed

M&L reinforced cement concrete (Design mix M-25) using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.

Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point. complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per itme No 17 above but 5mmdia and over upto and including 10mm dia in stirrups,spacer and binders. complete all as specified and directed.

M & L brick work with sub class B bricks straight or curved on planexc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using waqter proofing compound complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:4 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

M&L moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etc complete all as specified and directed.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base, sub floors, including use of formwork / screed strips to divided the area in panels complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even surface complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement complete all as specified and directed.

Forming contraction (dummy) joint 75mm deep X 10mm wide filled with sealing compoung Grade 'A', complete all as specified and directed.

S&F glazed ceramic colored tiles (Premium quality) 200x300x6 to 7mm thick coloured on vertical surface such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including rendering 15 mm thick on brick or stone masonry surfaces finished fair and even to recieve tile in CM 1 : 4 complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats colour wash over one coat of white wash complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:3 , mixed with water proofing compound, on concrete surfaces of roof , surface finished even and smooth. (supply only of water proofing compound shall be measured and paid seperately) complete all as specified and directed.

M & Lfor water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying hot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paing @0.2kg/sqm on top complete all as specified and directed.

Supply only water proofing compound of approved make.

S&F Water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests including flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed.

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe including plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, flushing cistern and flush pipe complete all as specified and directed.

M&L for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as sapecified and directed.

M&L brick work with subclass 'B' bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4 complete all as specified and directed.

S&F 20mm bore medium grade galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

All as per itme No 42 above but 15mm bore GI tubing medium grade complete all as specified and directed.

S&F 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F 15 mm fancy type concealed type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

S&F 15 mm fancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

S&F 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm bore GI tube complete all as specified and directed.

S&F health faucet with fluxi pipe and hand shover ,the length of hose 1mtr fitted to the tap.make JAQUAR Code no.563 or equivalent as approved by GE

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube complete all as specified and directed.

All as per Item No. 51 above but 25 mm dia.

S&F PVC(SWR)75mm borepipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

All as per itme No 53 above but 110mm bore

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR)bend 110mm bore

S&F PVC (SWR)bend 75mm bore

S&F PVC(SWR) bend 110mm bore with access door

All as per itme No 58 above but 75mm bore

S&F PVC (SWR) vent cowl, 100mm dia

S&F PVC (SWR) vent cowl, 75mm dia

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PTMT waste coupling of 32mm dia for wash basin/urinal complete all as specified and directed

S&F PVC LDPE waste pipe of pressure rating 6kg/cm2 of 32mm dia pipes complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed

M&L PCC 1:3:6 type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200mm dia pipe complete all as specified and directed

M&L 200mm dia salt galzed stoneware drain pipes laid in trenches and jointed complete all as specified and directed

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm bore drain pipe complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing.

S &F Factroy made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with het moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuch inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rail & bottom rail on either side & as fap insert for top rial & bottom rail, Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator fixed type/sliding with 6mm thick acid texture approval design including necessary jointing cleats glazing clips,rubber packing,anodised aluminium snap beading,screws etc complete all as specified and directed

S&F 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth and getting out soft/loose soil, complete complete all as specified and directed.

Supply dry sand for cushioning to underground cables 8cm thick before laying cable and 15cm thick after lying and streching the cable, complete all as specified and directed by Engr-in-Charge. Note :- For payment purpose punned thickness shall be measured.

S&F Sub class ‘B brick, old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed by Engr-in-Charge.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 Core complete all as specified and directed

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core complete all as specified and directed

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core complete all as specified and directed

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 Core complete all as specified and directed

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 Sqmm 3.5 Core complete all as specified and directed

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 Sqmm 3.5 Core complete all as specified and directed

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150 Sqmm 3.5 Core complete all as specified and directed

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm 3.5 Core complete all as specified and directed

M&L earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron strip 32x6mm size by means of bolts ,nuts,check nuts and washers of galvanised iron and 32x6mm GI strip procted by provision of GI light grade pipe 40 mm bore incl provision of concrete pit in PCC1:2:4 type B-1, using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg /Sqm and 6mm dia bar handle ,excavation and earth work in any type of soil ,charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mesh and medium grade GI protection pipe 15mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 3 of MES Sch 2009 Part-I complete all as specified and directed. Notes:- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 metres length shall deem to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthing lead beyond 7.5 metres shall be measured and paid for seperately under appropriate item of Sch A part-I. (iii) On testing after completion if desired resistanace is not obtained, the contrator shall redo the earthing without any extra cost to the department.

Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 6 to 16 Sqmm 4 core complete all as specified and directed by Engr-in-Charge. Make - 3M or equivalent

Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 25 to 50 Sqmm 4 core complete all as specified and directed by Engr-in-Charge. Make - 3M or equivalent

Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 70 to 120 Sqmm 4 core complete all as specified and directed by Engr-in-Charge. Make - 3M or equivalent

Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 150 to 185 Sqmm 4 core complete all as specified and directed by Engr-in-Charge. Make - 3M or equivalent

Supply and install hi wall inverter type split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality, of capacity 1.5 TR with CFC free Refrigerant gas like R-32/R-410a suitable to operate on 230V single phase supply, including Voltage stabilizer wall mounted Automatic Boost/Buck for low/high voltage correction equipped with electronic circuit, of single phase AC supply and designed for input voltage of 170 to 270 Volts and stablizer output voltage between 215 to 240 volts. TDR to 3 Min of capacity, 4KVA rating, and including Refrigerant copper tube of suitable dia.from indoor to outdoor unit, Insulation felt to copper tubing, power cable/controll wiring from indoor to outdoor units,supply power cable & connection through Stabilizer to indoor unit,provision of rigid UPVC condesate drain piping from indoor unit to ground level etc., and including taking down old unseveceable Spilt AC and handed over to AGE E/M Stores complete all as directed by Engr-in-Charge. Split AC make :- Bluestar, Samsung,whirlpool, Voltas or equivalent; Stabilizer make:-V-Guard/K-line/Blue Bird

Supply and install hi wall inverter type split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality , of capacity 2.0TR with CFC free Refrigerant gas like R-32/R-410 suitable to operate on 230V single phase supply, including Voltage stabilizer wall mounted Automatic Boost/Buck for low/high voltage correction equipped with electronic circuit, of single phase AC supply and designed for input voltage of 170 to 270 Volts and stablizer output voltage between 215 to 240 volts. TDR to 3 Min of capacity, 5KVA rating, and including Refrigerant copper tube of suitable dia. from indoor to outdoor unit and Insulation felt to copper tubing power cable/controll wiring from indoor to outdoor units,supply power cable & connection through Stabilizer to indoor unit,provision of rigid UPVC condesate drain piping from indoor unit to ground level etc., and including taking down old unseveceable Spilt AC and handed over to AGE E/M Stores complete all as directed by Engr-in-Charge. Split AC make :- Bluestar, Samsung,whirlpool, Voltas or equivalent ; Stabilizer make:-V-Guard/K-line/Blue Bird

Supply ,installation,commissioing of refrigerator ,electric driven single phase 230 Volts,having approx nominal cooling capacity 200 Ltrs with defrost sysytem (5 star rated) including voltage stablizer automatic voltage stablizer wall mounted automatic Boost/Buck for low/high voltage correction equipped with electronic circuit of single phase AC supply and designed for input voltage of 170 to 270 VOLTS and stablizer output voltage between 215 to 240 volts TDR to 3 min of capacity 2 KVA .complete all as specified and directed by engg-in- charge Make : LG/Whirlpool/Godrege or equivalent

Supply, installation,commissioning of water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 60/120 Ltrs. including Voltage stabilizer Automatic of capacity 3 KVA with Thermostate control, stainless steel tank , stainless steel water tray, faucet , inlet PVC Pipe & drain pipe length from waste water tray to drain is up to 3 metres with necessary plumbing work and including taking down old unseveceable water cooler and handed over to AGE E/M Stores complete all as directed by Engr-in-Charge. Make :- Bluestar/USHA/ Voltas or equivalent

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

M&L point wiring complete with PVC insulated and unsheathed, flame retardant low smoke 1100 volt grade electric cable of 1.5 Sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC concealed conduit not less than 15 mm dia, and wall thickness 2mm, with suitable GI flush metal boxes (not less than 1.00mm thick) of suitable sizes including earth dolly with 3mm thick plastic laminated sheet top cover of approved colours including 1.50 Sqmm PVC insulated & unsheathed copper cable as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :- (a) One light/fan point controlled by one way switch 5 Amps

(b) One 5 pin socket outlet, 5 Amps, Independent

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F switch piano flush button single pole one way 6 Amps, complete all as specified and directed.

M&L for Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed

S&F sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar capacity SPN 8 way AC 230 volts with IP-43 protection, complete all as specified and directed.

S&F ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less'than 1.5 meters below normal ground level, connected to galvanised iron earth lead wire of 4 mm dia GI pipe mediam grade 15 mm dia upto 7.5 mtr including provn of conrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3 mm with lugs 02 Nos and with 6.0 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for earth plate, common sald and charcoal filing, test point made out of Bronze/ Gun metal with fixing arrangement, funnel, wire mess and excavation/ earthwork in hard/ dense soil, to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2009 Part I and connecting to earth test point all as specified or indicated incl testing on completion.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 40 to 63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F for street light fitting bracket made out of 32mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall, painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed

Supply, laying and testing LT cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade cross section area 16 sqmm 2 core complete laid in trenchers, duct, passing through pipe, fixed to poles complete all as specified and directed by Engr-in-Charge.

Supply and laying for 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size 25 mm OD complete all as specified and directed.

Supply and fixing PP-R Gate valves (brass insert) of size 25 mm OD complete all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if reflixing required for 20 mm bore of pipe complete all as specified and directed.

M/S K MURALIDHARA PATRA

M/s Bapujee Builders and Traders

V.Venkata Ramaiah

Likitha Enterprises

M/s Ats Electricals

HARAGOURI SUPPLIERS

M/s MAA BHAIRABI ENTERPRISES