KMC/LTG/W6/APAS/1/168/149/4/R

Supplying of Swaged Steel Tubular pole as per IS 2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)h) 410 SP - 24 ; 8.5 Mtr., 158.00 Kg..

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto 9.0 mtr. Size 0.6x0.6x1.70 mts

Supplying & Fixing of m.s. Sole plate (450x450x6m) at the bottom of pole.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.ii2nd coat of aluminium paint over 1st coa

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe

S/F fabricating, welding, G.I. junction and 2.1 M long double arm projected bracket made of 2" dia G.I. pipe (ISI medium) with 2 nos. thro... bolts & nuts of 175 mm(7") long 15.6 mm (5/8") dia junction with set screw etc. complete as per per direction of Engineer-In-Charge

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1. 5 m (5') length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work

Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab).10sqmm x 4core

Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing

Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) on flat iron frame on wall 415V TP/TPN

SUPPLYING & DELIVERY OF SINTEX 2 FRP WHITE WATERPROOF TYPE LOOPING CABLE BOX SIZE 200X300X125 MM DEEP, 4 MM THICK, HAVING INSULATION RESISTANCE GREATER THAN 200 MOHM, IP66; COMPRISING OF ONE NO SPMCB, 4 NOS. TERMINAL CONNECTOR HAVING VOLTAGE GRADE OF 1.1 KV, ONE COMPRESSION TYPE BRASS CABLE GLAND FOR UPTO 4 CORE16 SQMM PVC/A CABLE AS PER RATE OBTAINED FROM GEM PORTAL

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand(approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm)

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

SUPPLY AND DELIVERY OF 200 WATT LED FLOOD/STREET LIGHT FITTINGS OF ANY SUPERIOR MAKE AS PER KMC LAST STORE PURCHASE RATE WITH 5(FIVE) YEARS WARRANTY FROM ORIGINAL EQUIPMENT MANUFACTURER

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 6 1/2.80 4

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting

SUPPLY AND DELIVERY OF 40 WATT LED STREET LIGHT FITTINGS ANY SUPERIOR MAKE AS PER KMC LAST STORE PURCHASE RATE WITH 5(FIVE) YEARS WARRANTY PERIOD CERTIFICATE FROM THE ORIGINAL EQUIPMENT MANUFACTURER

S/F single arm projected lamp bracket (Single pipe bending) of 50cm (2") diaG.I. pipe (ISI medium) 3.65 mm thick of 2.1 mtr (6' approx) long having 105 degree curvature with reducing socket to be fitted at the top of the pole with bolts, nuts, clamps etc. as required

Removing of luminaries with lamp from the pole/column and keeping them ready for dispatch as per direction of EIC: HPMV/HPSV luminaries/MH/LED street light fittings

SUPPLY AND DELIVERY OF 150 WATT LED STREET LIGHT FITTINGS OF ANY SUPERIOR MAKE AS PER KMC LAST STORE PURCHASE RATE WITH 5(FIVE) YEARS WARRANTY FROM ORIGINAL EQUIPMENT MANUFACTURER

Sub Total