PROVN OF ELECTRIC GEYSER FOR GOVT MD ACCN AT KANJOLI LINES OF 39 FAD AND SPL REPAIR REPLACEMENT OF INTERNAL SECURITY LIGHTS ALONGWITH OLD PCC POLES WITH SOLAR LIGHTS AT DEPOT AREA UNDER GE BHARATPUR

Supplying, errecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) including painting with two coats of aluminium paint over one coat of redoxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide complete all as specified. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

Supply and fixing of Lithium base Energy efficient integrated Solar street light of 30 watt in Aluminium Die casting body ,corrosion resistance,built in high efficiency solar panel and long life lithium ferro phosphate battery with high efficiency microprocessor based charge controlar Automatic dusk to input voltage 12.8 V with minimum 30 AH battery capacity ,Driver efficiency .85%,PV module minimum output capacity 60 W/h Mono itself will be used to sense the ambient light to switch ON/OFF the Lamp from outside from Light fittings and controled from Pole controlling switch,inbuilt MPPT charge controller,IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with grater than 150 lumen per watt,5700ANSI,,CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(135/85 degree) with PIR Sensor LED Life 50000 hrs (LM80 cerified LED),weight less than 15 kg with Green/Red indicator with with battery rating 12.8V-BIS standard along with 5 year warranty covered ,fixing on steel tubular pole alongwith flat I iron clamps of size 30x6mm nut and bolts including alternate strip of 0.25 metre each with yellow / black (zebra painting)synthetic enamel paint upto 1.5 meter height with dismenttling & taking out old street light along with bracket of complete all as specified. Make : Orient / Havells / Phillips

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth and getting out for laying of cable etc. complete all as specified.

Excavation in trenches n.exc 1.5 M wide and exc 1.5m depth but n.exc 3.0m in depth for pole foundation, in soft / loose soil getting out and levelling of bottom surface to required level complete all as specified.

Removing of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foudation,filling and mass concrete complete all as specified.

M&L for cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foudation,filling and mass concrete complete all as specified.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate for pedestal of poles/ coping including necessary formwork, fair finishing to exposed surfaces using extra cement complete all as specified.

Supply, install, test and commissioning factory made THERMOPLASTIC/HDPE CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of size 280 x 170 x 105 mm depth each, with flat iron clamps of size 25 x 5 mm, nuts and bolts with MCB SP 6 Amp-01 complete all as specified. Make : Sintex/Fibox/salabh

S & F in replacement 2.5 sqmm multistranded and multiflexible round cable conductor 1100 volts grade heavy duty twin core cable from Junction box to fitting complete all as specified.