Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹48.5 L+₹3.0 L (6.64%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹50.0 L+₹4.5 L (9.85%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹47.9 L
EMD Value
₹95,880
Closing Date
29 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
ADDN/ALTN TO BUILDING NO. P-17, P-19 AND P-20 (STN ARMOURY) AND CERTAIN MAJOR REVENUE WORKS AT AFS BEGUMPET AND HAKIMPET UNDER GE (AF) HAKIMPET
2023_MES_626078_1
8593/E8
Open Tender
Civil Works
Item Rate
180 days
Begumpet and Hakimpet
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Hakimpet
₹95,880
Yes
9 Jan 2024
1 Nov 2023
1 Dec 2023
1 Nov 2023
29 Nov 2023
15 Nov 2023
Amount
Dismantling Plain or corrugatd steel sheeting, any gauge, thickness, including Nainital with Single layer Mangalore patttern or similar pattern roof covering complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick Ridge of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified.
S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240
S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates (Fe 410-W Gde-E-250 quality-A).
M&L Preparing new steel Surfaces of any any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete.
Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, false ceiling any type.
S&F 600x600mm GI bottom pre coated exposed snap grid frame work with 25x25x7mm wall angle and 25mm web, 35mm flange 0.7mm thick T-sections hanging with 4mm dia GI wire (up to 1200 mm long) including level clip, soffit cleat and 12.7 mm dia metal Raw plug at 1200mm c/c in both including S&F PVC laminated designed (one side PVC lamination and other side aluminium paper) gypsum board 600 X 600 X 8 mm thick tiles decorative type in GI grid frame work with screws or clips etc complete all as specified and as directed by Engineer-in-Charge.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cemetn lime mortar including all quoins, arches, pillars, etc.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement
Material and labour PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in copings.
M&L for Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts
Demolition of cement concrete (unreinforced and including tiles) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removed debris outside the MD land complete all as specified and directed by Engineer-in-charge.
M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed.
M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L for chequered cement concrete tiles of size 300 x 300 x 25 mm thick with gray cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors over and including 15 mm thick CM screed bed in CM 1:6 complete all as specified and directed
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises outside low laying area and removed debris outside the MD land complete all as specified and directed by Engineer-in-Charge.
M & L 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in Sub-floors, sub-bases, Floors and Pavings, etc.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting.
M&L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match
Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,including 10mm thick plaster in CM (1:3) and pointed in white or colour in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M & L for pre-polish machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and and including 10mm thick plaster in CM (1:3) and pointed in white or colour cement to match jointed with grey cement slurry mixed with pigment to match the shade of the slab complete.
Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. and removed debris outside MD land.
M & L for rendering 15mm thick on fair faces of brick work or concrete or stone surfaces in cement mortar 1:6 , finished even and smooth without using extra cement
M&L for preparing New surface plastered or unplastered surfaces of walls and applying three coat of white wash, complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls (boundary wall) and applying two coat of white wash, complete all as specified and directed.
M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design including welding all as directed of Fe 290 Grade E-165.
S&F mild steel flat iron hold fast of any size and any similar articles confirming Fe 290 Grade E-165.
S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.
S & F, steel ventilators with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.
S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of grading Fe 410-W (Gde E-250) quality A
S & F for 1.25 MM thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)
Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any type of soil.
M & L for excavating in trenches, n.exc. 1.5m wide and n. exc 1.5m in depth, for foundation, etc and getting out in any type of soil, complete all as spd and directed by engineer-In-charge.
M&L for Cement concrete Type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete
M&L for Cement concrete Type B2 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete
S & F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-In-Charge.
Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed by engineer-In-charge.
Supply only Chain link MS galvanised fencing of mesh size(nominal pitch of wire) of 50mm and 3.0mm dia.
M & L Mild steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for columns hooking ends and binding with and including mild steel wire annealed not less tan 0.9 mm dia or securing with clips quality conforming to round barsconfirming Fe-410-W(Gde.E-250), complete all as specified and as directed by Engineer-in-Charge.
Mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut ,not exceeding 5cm long and diameter of neck 5 to 10mm complete all as specified and directed by Engineer-In-Charge.
Returning, filling incl spreading leveling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and directed by Engr -In Charge.
Removing excvated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed by Engr -In Charge.
Prepration of new or previously un-treated steel surfaces over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over one coat of redoxide primer ,complete all as specified and directed and directed by Engr-in -Charge.
M&L Old size Brickwork with fly ash brick, straight or curved on plan exc 6m menan raidus, built in CM 1:6
Rendering 15 mm thick cement plaster on fair surfaces of brick work or concrete surfaces in CM 1:4 finished to even and smooth surfaces in without using extra cement etc complete all as specified and directed.
S&F false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum ) fire resistant false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws all as specified and directed by Engr-in -charge.
Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each
M&L Powder coated (minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge
S&F 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge
S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed
Dismantling of Wall panelling and similar work including frame work
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil
Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil
M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge.
M&L 100mm thick Plain Cement concrete type C-2, 1:3:6 (40mm graded aggregate) Laid in flooring as specified and directed by Engineer In charge.
M&L 75mm thick Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) Laid in base of flooring as specified and directed by Engineer In charge.
S&F Steel work as in tubular / L post trusses,plates, purlins including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.
M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.
Taking down carefully copper/ aluminium point wiring (light, fan,socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, regulators, sockets, light fittings, ceiling fans, exhaust fans etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge. Note: (i) Flame proof light fittings, rotary switch, ceiling fans and exhaust fans are required to be stored properly for refixing.
Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn through and including stove enamelled steel conduit with all conduit accessories such as junction boxes, bends, saddles, fabricated steel teminal box made out of 1.60 mm thick MS sheet on walls and covered including provision of 1.5 sqmm PVC indulated copper cable FRLS as earth continiuty conductor all as specified for :-
(a) One light point controlled by one 1-way switch.
(b) One ceiling fan/ exhaust fan point controlled by one 1-way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin 5 Amps socket outlet the switch board of light point ini the same vertical plane.
(e) One 3 pin socket outlet 5 Amps on the Independent board.
Supply and fixing LED light fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including mounting bracket made of GI pipe 32mm dia light grade of minimum length 60cm and MS clamps, nut, bolts.
M&L for refixing the Flameproof light fitting 2x20W complete with necessary nuts, bolts etc. and connecting up with three core flexible copper conductor cable with suitable size. Note : Flame proof light fitting taken down under respective item above shall be reused for fixing.
M&L for refixing of Flameproof rotary switch complete with necessary nuts, bolts etc and connecting up with three core flexible copper conductor cable with suitable size. Note : Flame proof rotary switch taken down under respective item above shall be reused for fixing.
M&L for refixing of ceiling fan complete with necessary nuts, bolts etc. and connecting up with three core flexible copper conductor cable with suitable size. Note : Ceiling fan taken down under respective item above shall be reused for fixing.
M&L for refixing of exhaust fan complete with necessary nuts, bolts etc and connecting up with three core flexible copper conductor cable with suitable size. Note : Exhaust fan taken down under respective item above shall be reused for fixing.
Supply and fix Switch Piano, flush type single pole, one way 5 Amps.
Supply and fix Switch socket combination 2 in 1, 5 Amps flush type.
Supply and Fixing Stepped type electronic fan regulator flush type.
Supply and fixing Ceiling rose PVC/ Polycorbonate insulated body with three terminals.
Supply and fix in repair distribution board 240V SPN double door 4 way when incomer and outgoings are MCB's complete all as specified and as directed.
Supply and fix in repair distribution board 240V SPN double door 8 way when incomer and outgoings are MCB's complete all as specified and as directed.
Supply and fix in repair Single pole & Neutral Metal clad enclosure with a two pin and earth plug and socket including one single pole MCB of 20amps complete all as specified and as directed by the Engineer-in-charge.
M&L for sub main wiring with 2x4.0 Sq mm and 1x4 Sqmm(Earth), FRLS PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor calbe, single core, drawn through and including stove enamelled steel conduit including taking down old unserviceable sub main wiring of any description complete all as specified and as directed by Engineer-in-charge. Note: Three runs 4 Sq mm copper cable and one run of suitable dia steel conduit shall be measured as one unit length. Cost of cutting chases into exist brick wall making good is deemed to be included in quoted rate .
Supply & fix in repair MCBs suitable for fixing in MCB DB 'C' series.
MCB DP 6-32A, 230 volts
MCB SP 6-32A, 230 volts.
M&L in repair for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 25x4 mm galvanized iron strip as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 40mm dia med. gr. GI pipe for protection of galvanized iron strip in the ground, including excavation, earth work, Charcoal & Salt all as specified, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, complete including old U/S earth pit all as specified and as directed. NOTE: a) GI Pipe for protection of earthing strip and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items.
Taking down the AC, carefully the indoor and outdoor units along with voltage stablizer of split type air conditioner of capacity upto 2.0 TR by disconnecting all electrical connections, suction and discharge lines from its installed position and REFIXING, making hole into brick/stone wall & filling back with white cement where directed and installing the indoor and outdoor units alongwith stablizer at specified location and connecting all the electrical, suction and discharge lines, including M&L for topping up the refrgerant gas as required and testing on completion for proper functioning complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair Microprocessor based two zone fire alarm control panel (conventional type) with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted complete including Standby battery backup with built in charging. Make & Model : RE102 of Ravel or equivalent
Supply and fix in repair conventional multi sensor detector, Dual LED’s for 360 visibility compatible to work with conevntional panels. Make & Model : RE 316SH-2L of Ravel or equivalent
Supply and fix in repair conventional Manual Call Point compatible to work with conevntional panels. Make & Model : RE716MR of Ravel or equivalent
Supply and fix in repair conventional Sounder cum strobe compatible to work with conevntional panels. Make & Model : RE - 24SS of Ravel or equivalent
Supply and fix in repair two core 1.5 sqmm armoured stranded copper cable armoured by GI wire drawn through and including stove enamelled steel conduit with all conduit accessories such as junction boxes, bends, saddles etc (for connecting fire detectors, hooters, MCP & Fire panel)
Supply & fix in repair single pointed air termination copper rod 12mm dia, 1000 mm long in vertical position grouted in PCC concrete coping. The size of PCC coping shall not be less than 30cmx30cmx45cm. Necessary fasteners to connect copper strip with copper air termination rod shall be provided.
S&F in repair Copper strip 20 x 3mm with insulators and fixing screws etc. for roof conductors and down conductors above ground
Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles.etc complete as specified and as directed.
Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25 Cm thick .etc complete as specified and as directed.
Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point and all as specified and as directed.
Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as directed. (Note: The punned down thickness shall only be measured)
Material and labour for brick sub class 'B' to be laid in trenches as protection to cable all as specified and directed.
M&L for road cutting /Hard standing for taking up or laying of LT UG Cable upto a depth of 15cm, after laying of cable well ramming to the excaved soil and repair the excavated portion of the road as existing or by providing suitable mixture of PCC complete all as specified and directed
M&L for 40mm bore galvanized iron light grade pipe for cable protection complete with all fittings fixed to wall or laid in floor/road crossing or on pole, complete all as specified and directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core (From Main DB at DSC rest room to Bldg No 17,19 & 20)
Removing of ceiling lights of 2x2 36 W from ceiling including disconnecting of electrical connection and REFIXING of same fitting after installation of false ceiling and connecting electrical connection complete all as specified and directed by Engr-in-charge.
Removing of smoke and heat detector from ceiling and disconneting of electrical connection and REFIXING the same after installation of false ceiling and connecting electrical connection complete all as specified and directed by Engr-in-charge.
Removing of IP Camera from ceiling and disconneting of connection and REFIXING the same after installation of false ceiling and connecting connection complete all as specified and directed by Engr-in-charge.
Removing of ceiling fan and disconnection of electrical connection and disconnection of blades and REFIXING of same after installation of false ceiling and connecting electrical connection including provision of cable from ceiling rose to fan complete all as specified and directed by Engr-in-charge.
Removing of fire alarm speaker from ceiling including disconnecting of electrical connection and REFIXING of the same fitting after installation of false ceiling and connecting electrical connection complete all as specified and directed by Engr-in-charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including shifting of unserviceable fitting into store complete all as specified and directed by Engr-in-charge.
Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed
M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping / PVC Conduit pipe of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:-
NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular white colour cover plate with frame or with 3 mm thick laminated sheet fixed with suitable brass screws and cup washers (a) One light point / fan point controlled by one, one way switch 5 Amps
Supply and laying Rigid non-metallic PVC conduit of 20 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed by Engr-in-charge.
VACON INFRASTRUCTURES
KOGANTI CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .