REPAIR MAINT OF STREET LIGHT and OTHER CONNECTED WORKS AT AHRR UNDER GE EM RR HOSPITAL DELHI CANTT 10

Amount

Checking of street light / flood light of any type or description, fixed in vertical position with poles / high mast / wall/ bldg security light , including disconnecting the electric connection, Taking down from pole / high mast / wall, cleaning of acrylic/glass sheet cover with detergent powder, and refixng the same after necessary repairs including replacing defective items provided under relevant items of Sch 'A' here-in-after as supply & fixing only, replacing of fuses, small wires of any size and description upto 0.5 mtrs, screw, washer for fixing of accessories, making all electric connection, testing for functioning, by engaging sufficient man power and tool & plant etc to ensure safety of light / pole as well as working team complete all as directed. Note : (a) Any kind of replacement of major items shall be measured & paid separately under respective items of schedule. (b) The cost of Tool & plant for street light repairing vehicle/ladder extended type is deemed to be included in quoted rates and no extra payment will be paid to the contractor in this effect. (c) Contractor shall arrange a staff to monitoring the street light repairing team and maint the complaint register and complaint slip. (d) complaint once lodged shall be rectified within 24 hrs. Complaint slip of shall be maintainted by contractor and after rectification, slip shall be signed by JE E/M. If complaint is not attended within 24 Hrs, penalty will be charged at a rate of Rs. 310 per day per complaint.

S&F Metal Halide lamp 400 watt, single ended screw type, tubular type as existing shape and size complete all as directed. Make : CG / Havells / Halonix

Ditto as per item No 02 above but 250 watt. Make : CG / Havells / Halonix

Ditto as per item No 02 above but 150 watt.Make : CG / Havells / Halonix

Ditto as per item No 02 above but 70 watt. Make : CG / Havells / Halonix

S&F in repairs open Construction copper ballast (Choke) suitable for 400 watt MH / HPSV light fitting complete all as directed. Make : Halonix ( Part No HBO01 400S/MH) or equivalent in CG, Havells.

Ditto as per item No 06 above but 250 watt. Make : Halonix ( Part No HBO01 250S/MH) or or equivalent in CG, Havells.

Ditto as per item No 06 above but 150 watt. Make : Halonix ( Part No HBO01 150S/MH or equivalent in CG, Havells.

Ditto as per item No 06 above but 70 watt. Make : Halonix ( Part No HBO01 150S/MH or equivalent in CG, Havells.

Supply only in replacement ignitor suitable for HPSV/MH fitting of 70 - 400 watt complete all as directed. Make : Halonix ( Part No HIGN01 SD)or equivalent in CG, Havells.

S&F capacitor 42 MFD for HPSV/MH fitting of 400 watt complete all as directed. Make : CG / Havells / Halonix

S&F capacitor 33 MFD for HPSV/MH fitting of 250 watt complete all as directed. Make : CG / Havells / Halonix

S&F capacitor 20 MFD for HPSV/MH fitting of 150 watt complete all as directed. Make : CG / Havells / Halonix

S&F capacitor 10 MFD for HPSV/MH fitting of 70 watt complete all as directed. Make : CG / Havells / Halonix

S&F lamp holder suitable for single ended tubular/elliptical HPSV/MH lamps of 250/400 Watt complete all as directed. Make : CG / Havells / Halonix

S&F lamp holder suitable for single ended tubular/elliptical HPSV/MH lamps of 150/70 Watt complete all as directed. Make : CG / Havells / Halonix

S&F street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, clamp set washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as directed.

Ditto as per item ser No 17 above here-in- before but 40 mm dia

S&F street light digital timer switch DIN type Daily /weekly with 2CO 16 Amps, . Make - Indoasian Cat Part No 5472 or equivalent model of Make L&T, C&S, Havells.

S&F in replacment street light panel 3 phase frame of capacity 40 A 3 Pole incl Digital timer, power contact, isolator 4 pole, indicator lamps with switch for bypass arrangment and fixing by making proper foundation with angle iron frame or fixed in pole all as directed by Engr -in-charge. Make : Indoasian Part No TL040DB0/ L&T/ Havells.

M & L for connecting 1100 volt grade heavy duty cable PVC insulated copper conductor, served with inner sheathing of PVC tap and over all PVC sheathed in service connction for street light from FRP junction box to street light of size 3 core 1.5 sqmm complete all as directed. Make : Granley/ Polcab/Havells

Supply and fixing HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 295mm x 255mmx 120mm incl 4 way heavy duty terminal block with and two number of PVC cable entry gland of standard size with suitable stainless steel bracket to fix with pole, including taking down existing complete all as directed. Make: Sintex /Hansel

S&F of micro prismatic reflective sheet, min 2.5 cm wide, with adhesive base for directly fixing on HT/LT steel tubular/PCC pole without nail or any other fixing material at suitable height, in Red/White/Yellow colour complete all as directed. Make : 3M or equivalent

M& L in replcement power contactor for street light panel 63 Amps rating capacity with 415 AC volt complete with testing all as specified and directed. Make : Indoasian/ L&T/ Havells

Supply & Replace MCB SP 6 to 32 Amps 240 Volts ('C' curve). Make: Indoasian/L&T/ Havells.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removal of excavated material not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as directed.

M&L Sand cushioning for UG cable protection/ducts, consolidated sand compacted with clean dry sand all as directed and specified.

Supplying laying, brick sub class 'B' common burnt laid in trenches for cable protection complete all specified and directed.

Taking out old defective under ground cable from trenches floor / road / wall / pipe/ pole of size and description, complete all as directed.

Labour for re-laying the serviceable part of cables of any sizestaking out under above mention items after repairing defects / making joints etc in same trench or any other location, complete all as directed. Note : 1. The excacation, earth work, sand cushioning, protection cover, and cable joints etc will be measured and paid for seperately under respective items.

Labour for laying LT cable of size 4.0/ 3.5 core 16 sqmm to 50 sqmm or description, suitable for earthed system laid in duct/ trenches/ alongwith pole/wall etc including making connection complete all as directed. Note : 1. The cost of lugs is incl in quoted rate and no extra cost will be made. 2. The LT cables off sizes shall be issued under sch 'B' free for laying .

M&L for road cutting, including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boudders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.

M&L for cleaning, scrubbing and preparation of old, rusted painted surface of existing steel tubular pole of 09 to 11 mtr height complete and painting with one coat of aluminium paint including channels/ brackets, street light brackets, cross arms and making black & white alternative strips of 30 cm height with synthetic enamelled paint and upto 1.5 mtr height and writing pole numbers with yellow synthetic enamelled paint after making circular base with black synthetic enamelled paint and applying two coats of white apex paint on PCC coping etc, complete all as directed.

S&F in replairs of driver for LED street light/Flood light of following capacity or as per existing make & model to made LED light serviceable all as directed.

(a) Driver for LED light 40 w to 50 watts, 240 Volts, single ph, 50Hz .

(b) Driver for LED light 90-100 watts 240 Volts, single ph, 50Hz .

(c) Driver for LED light 120 watts 240 Volts, single ph, 50Hz .

S&F in repairs LED panel for LED street light/Flood light of following capacity or as per existing sample to made LED light serviceable all as directed.

(a) LED panel for LED light 40 w to 50 watts 240 Volts, single ph, 50Hz .

(b) LED panel LED light 90-100 watts 240 Volts, single ph, 50Hz .

(c) LED panel LED light 120 watts 240 Volts, single ph, 50Hz .

S&F building security light highly efficient mid power LED 25 watts with pressure die cast aluminium housing and enclosed with toughned glass confirming to IP 66, 240 volts, 50 Hz including taking out old unserviceble light complete all as specified. Make : Halonix Part No HLSLD-07-25-CW-E or equivalent model of Make. CG/ Havells.

S&F street light high power LED 60 watts with pressure die cast aluminium housing, reflector and enclosed with toughned glass confirming to IP 66, 240 volts, 50 Hz including taking out old unserviceble light complete all as specified. Make : Halonix Part No HLSLD-09-60-CW or equivalent model of Make. CG/ Havells.

All as per item item Sr No 39 but for 90 Watts. Make : Halonix Part No HLSLD-09-90-CW or equivalent model of Make. CG/ Havells.

All as per item item Sr No 39 but for 120 Watts flood light . Make : Halonix Part No HLFD-ML05-120-CW or equivalent model of Make. CG/ Havells.

S& F LED Post top with die cast aluminium spigot and lid cover, high efficient LED's and clear acrylic cover confirming to IP65 240 volts, 50 Hz including taking out old unserviceble light complete all as specified. Make : Halonix Part No HLPT-01-30-CW or equivalent model of Make. CG/ Havells.

S& F in repairs LED bulb 5 watts. Make : CG/Surya/ Bajaj

Note for item Ser No 38 to 42 (i) Quoted rate are deemed to include rate of cable connection upto 0.5 mtr long of size 3 core x 0.75 sqmm and for proper fixing of fitting with existing location ie. Poles/ walls. (ii) Cost of LED street light is included the cost of fixing management where as required in existing pole/ bracket.

Material and labour for cement concrete 1:2:4 with 20mm aggregate for coping of poles, including necessary foam work complete.

Material and labour for cement concrete 1:3:6 with 40mm aggregate for foundation ofpoles, including filling and mass concrete work complete.

Labour for shifting of street light poles of any type/ length from existing position to new location including transportation, T&P & errection on site as direction by the Engr In Charge. Note : Excn , returning , refilling and PCC items will be measured and paid seperately.

M&L for MS work as in cross arms, bracings, supports, clamps and back plates including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including two coats of synthetic enamel paint over a coat of primer complete all as directed by Engr-in- Charge. Note: The rare quoted by the tenderer shall inclusive two coats of synthetic enamel paint over a coat of primer and nothing extra shall be paid on this account.

S&F HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 400 x 325 x 215 mm including 4 way heavy duty terminal block including two number of PVC cable entry gland of standard size with suitable stainless steel bracket to fix with pole, including taking down existing complete all as directed. Make : Sintex/Hansel

PRASAD ELECTRICALS

ACR ENTERPRISES

CHAUHAN ENTERPRISES

Dayal Enterprises

Flint India